Surface treatments of the zirconia-reinforced lithium disilicate ceramic in the adhesion to the resin cement
Open Access
- 1 January 2024
- journal article
- research article
- Published by FapUNIFESP (SciELO) in Brazilian Dental Journal
- Vol. 35, e24-5674
Abstract
This study verified the effect of surface treatments of the zirconia-reinforced lithium disilicate ceramic bonded to resin cement. Ceramic blocks were divided according to treatments (n=10): FA+SRX (Fluoric acid + silane RX), FA+MDP (Fluoric acid + MDP), FA+SCF+MDP (Fluoric acid + silane CF + MDP), FA+MEP (Fluoric acid + MEP), and MEP (Self-etch primer). Resin cement cylinders were made in the ceramic blocks, photoactivated with 1,200 mW/cm² for 40s, stored in water at 37°C for 24h, and evaluated by the microshear strength test, optical failure descriptive analysis (%), surface characterization (SEM) and contact angle (Goniometer). Other samples were submitted to 10,000 thermocycles between 5°C and 55°C. Bond strength data were submitted to two-way ANOVA and Tukey’s test. Contact angle to one-way ANOVA and Games-Howell's test (5%). At 24h, MEP showed higher bond strength, and FA+SRX the lower. FA+MDP and FA+SCF+MDP showed similar values and FA+MEP was intermediate. After thermocycling, FA+SCF+MDP, FA+MEP, and MEP showed higher values, and FA+SRX the lower while FA+MDP was intermediate. When the periods were compared, FA+MDP, FA+SCF+MDP, FA+MEP, and MEP showed higher values for 24h while FA+SRX was similar. SEM showed retentive surface and crystal exposure when treated with FA+SCF+MDP. The less retentive surface was obtained with MEP, and the other treatments promoted intermediate irregularities. In conclusion, surface treatment and thermocycling promoted different values of adhesive strength and contact angle in a zirconia-reinforced lithium silicate ceramic. Failures were predominantly adhesive, and the ceramic surface was characterized by different levels of roughness and selective exposure of crystals.Keywords
This publication has 28 references indexed in Scilit:
- Current Protocols for Resin-Bonded Dental CeramicsDental Clinics of North America, 2022
- Effect of a single-component ceramic conditioner on shear bond strength of precoated brackets to different CAD/CAM materialsClinical Oral Investigations, 2020
- Roughness, surface energy, and superficial damages of CAD/CAM materials after surface treatmentClinical Oral Investigations, 2018
- Clinical performance of screw-retained and cemented implant-supported zirconia single crowns: 36-month resultsClinical Oral Investigations, 2016
- A review of adhesion scienceDental Materials, 2010
- Microtensile bond strength of a resin cement to feldpathic ceramic after different etching and silanization regimens in dry and aged conditionsDental Materials, 2007
- The impact of hydrofluoric acid surface treatments on the performance of a porcelain laminate restorative materialDental Materials, 2007
- Durability of the resin bond strength to zirconia ceramic after using different surface conditioning methodsDental Materials, 2007
- Hygroscopic and hydrolytic effects in dental polymer networksDental Materials, 2006
- The influence of surface conditions and silane agents on the bond of resin to dental porcelainDental Materials, 1992