Photoelectrocatalysis on TiO2 meshes: different applications in the integrated urban water management
Authors:
- Maria Cristina CollivignarelliMaria Cristina Collivignarelli
- Alessandro AbbàAlessandro Abbà
- Marco Carnevale MiinoMarco Carnevale Miino
- Giorgio BertanzaGiorgio Bertanza
- Sabrina SorliniSSSabrina Sorlini
- Silvestro DamianiSDSilvestro Damiani
- Hamed ArabHAHamed Arab
- Massimiliano BestettiMBMassimiliano Bestetti
- Silvia FranzSFSilvia Franz
Open Access
- 11 February 2021
- journal article
- research article
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 28 (42) , 59452-59461
Abstract
Recently, among AOPs, photoelectrocatalysis (PEC) on TiO2 is gaining interest. In this study, five different real waters sampled in four different points of the integrated urban water management (IUWM) system were tested with PEC and UV alone, for comparison. This work aims to verify the effect of the PEC suggesting the optimal position in IUWM system where the PEC should be located to obtain the best performance. In groundwaters (GWs), PEC effectively removed atrazine-based compounds (> 99%), trichloroethylene, and perchloroethylene (96%), after 15 min of reaction time. However, given the low concentrations of emerging compounds, the synergistic effect of UV radiation with the catalyst and with the polarization of the mesh was not visible, with very few differences compared with the results obtained with UV alone. Pharmaceutical industrial wastewater (IWW) showed a significant increase in biodegradability after 2 h, both if subjected to PEC or UV (200%), despite the absence of COD removal. The PEC applied on IWW from a sewage sludge treatment plant allowed to effectively remove the COD (39.6%) and increase the biodegradability (300%). Good results in terms of COD removal (33.9%) and biodegradability increase (+900%) were also achieved testing PEC on wastewater treatment plant effluent. Except for GWs, PEC allowed significant EEO savings respect to UV alone (76.2–99.1%).Keywords
Funding Information
- Università degli Studi di Pavia
This publication has 46 references indexed in Scilit:
- Efficiency comparison of ozonation, photolysis, photocatalysis and photoelectrocatalysis methods in real textile wastewater decolorizationWater Research, 2016
- Efficient Solar Energy Conversion Using CaCu3Ti4O12 Photoanode for Photocatalysis and PhotoelectrocatalysisScientific Reports, 2016
- Photoelectrochemical advanced oxidation processes on nanostructured TiO2 catalysts: Decolorization of a textile azo-dyeJournal of Water Chemistry and Technology, 2015
- Photocatalytic materials: recent achievements and near future trendsJournal of Materials Chemistry A, 2013
- Photoelectrocatalytic technologies for environmental applicationsJournal of Photochemistry and Photobiology A: Chemistry, 2012
- Photolysis, Sonolysis, and Photosonolysis of Trichloroethane (TCA), Trichloroethylene (TCE), and Tetrachloroethylene (PCE) Without CatalystWater, Air, & Soil Pollution, 2010
- In situ growth of vanadia–titania nano/micro-porous layers with enhanced photocatalytic performance by micro-arc oxidationElectrochimica Acta, 2010
- Removal of 2,4-dichlorophenol in a conventional activated sludge system through bioaugmentationProcess Biochemistry, 2004
- Biodegradability enhancement of textile dyes and textile wastewater by VUV photolysisJournal of Photochemistry and Photobiology A: Chemistry, 2002
- Figures-of-merit for the technical development and application of advanced oxidation technologies for both electric- and solar-driven systems (IUPAC Technical Report)Pure and Applied Chemistry, 2001