Microstructure and Corrosion Resistance of the Alloys of Mo–15 at % Si–REE (Sc, Nd) in Air and in Air-Vapor Medium
- 1 March 2021
- journal article
- research article
- Published by Pleiades Publishing Ltd in Inorganic Materials: Applied Research
- Vol. 12 (2) , 296-306
Abstract
The influence of REEs, for example, Sc and Nd, on the structural phase state and behavior at oxidation in a dry and humid atmosphere of hypoeutectic high-temperature composite Mo–Si, crystallization of which from melt proceeds with formation of a two-phase in situ composite, was investigated. Samples of the model alloys with different concentration of REE were formed by vacuum arc melting of the charge material consisting of the binary alloy Mo–15 Si (at %) and additions of the doping elements. According to the data of X-ray diffraction and electron microscopy, the phase composition was determined, the peculiarities of the microstructure and pattern of distribution of alloying constituents in metal silicide composites Mo–Mo3Si containing from 0.5 to 3.0 at % Sc or Nd were revealed. The corrosion resistance of alloys Mo–15 at % Si–REE (Sc, Nd) at continuous heating to 700 and 850°C in air and in an air-vapor medium was estimated by the methods of thermal analysis (differential scanning calorimetry (DSC) and differential thermal analysis (DTA)). It was demonstrated that microalloying of the Mo–15 at % Si alloy with scandium or neodymium within the limits of 0.5 at % results in decrease of the oxidation rate at heating in air to 850°C. Increase in the concentration of doping elements to 3.0 at % REE at oxidation in air adversely affects the corrosion resistance of the samples; at the same time, oxidation of the alloys with neodymium proceeds at a higher rate than that with scandium. In an air-vapor medium, at nonisothermal heating, the alloy doped with scandium is oxidized more slowly than the binary alloy, while the sample with neodymium, on the contrary, is oxidized at a much greater rate in comparison with dry air.Keywords
This publication has 14 references indexed in Scilit:
- Influence of Rare Earth Elements on the Structural-Phase State of Mo–Si–X (X = Sc, Y, Nd) in situ CompositesInorganic Materials: Applied Research, 2018
- THE PROBLEM OF LOW-TEMPERATURE PLASTICITY OF MOLYBDENUM AND ALLOYS BASED ON IT (review)Proceedings of VIAM, 2018
- Oxidation behavior and microstructural evolution of a slurry sintered Si-Mo coating on Mo alloy at 1650 °CSurface and Coatings Technology, 2017
- Comparative studies of the oxidation of MoSi2 based materials: Low-temperature oxidation (300–900 °C)International Journal of Refractory Metals and Hard Materials, 2017
- Microstructure, mechanical properties and oxidation resistance of Mo5Si3–Al2O3 compositeMaterials Science and Engineering: A, 2014
- Oxidation performance of Mo3Si with Al additionsCorrosion Science, 2009
- Improvement of the oxidation-proof property and the scale structure of Mo3Si intermetallic alloy through the addition of chromium and aluminum elementsIntermetallics, 2006
- Oxidation behaviour of a MoSi2-based composite in different atmospheres in the low temperature range (400–550 °C)Journal of the European Ceramic Society, 2004
- Stoichiometry and mechanical properties of Mo3SiIntermetallics, 2000
- A comparative overview of molybdenum disilicide compositesMaterials Science and Engineering: A, 1992