Sputter yield and stoichiometry study of InGaZnO film in ion beam etching
- 24 March 2025
- journal article
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 43 (3)
Abstract
Although extensive research has been conducted on the characteristics of ion beam etching, studies focusing on sputtering yield at low ion energies and the effects of etching on material properties remain limited. In this study, the etching characteristics of InGaZnO4 (IGZO) thin films were investigated using Ar+ ion beams at various ion energies (50–800 eV) and incident angles (0°–87°). At ion energies below 100 eV, the sputter yield continuously increased with the incident angle across the entire range. This phenomenon differs from the established relationship observed at higher ion energies and may be attributed to surface collision dominating over ion reflection at low ion energies. To understand the impact of ion beam etching on IGZO materials, the chemical composition of IGZO was analyzed using x-ray photoelectron spectroscopy (XPS). An increase in the Ga percentage was observed after etching, accompanied by decreases in the In and Zn percentages, indicating that Ga is the most stable cation in these IGZO films under the ion beam etching etch process. After etching at high incident angles, the chemical composition of the IGZO thin films more closely resembled that of the as-deposited films compared to those processed at low incident angles. The O1s peak in XPS spectra was deconvoluted into three peaks: low binding energy (OL), medium binding energy (OM), and high binding energy (OH), and the ratio of OM to OL was employed to qualitatively assess the concentration of oxygen vacancies in IGZO films. An increase in the OM/OL ratio after the etching process indicates the formation of vacancies.Keywords
This publication has 37 references indexed in Scilit:
- Plasma Etch of IGZO Thin Film and IGZO/SiO2 Interface Diffusion in Inductively Coupled CH4/Ar PlasmasPlasma Processes and Polymers, 2024
- High-performance a-IGZO-based flexible TTFT with stacked dielectric layers via ultrathin high-κ SrTiO3 buffer layer grown on HfO2Journal of Materials Science: Materials in Electronics, 2022
- IGZO‐TFT technology for large‐screen 8K displayJournal of the Society for Information Display, 2018
- Subgap states, doping and defect formation energies in amorphous oxide semiconductor a‐InGaZnO4 studied by density functional theoryPhysica Status Solidi (a), 2010
- High-Performance Solution-Processed Amorphous Zinc−Indium−Tin Oxide Thin-Film TransistorsJournal of the American Chemical Society, 2010
- Characterization of Indium−Tin Oxide Interfaces Using X-ray Photoelectron Spectroscopy and Redox Processes of a Chemisorbed Probe Molecule: Effect of Surface Pretreatment ConditionsLangmuir, 2001
- Surface characterization of transparent conductive oxide Al-doped ZnO filmsJournal of Crystal Growth, 2000
- X-ray photoelectron spectroscopy of surface-treated indium-tin oxide thin filmsChemical Physics Letters, 1999
- On the variation of sputtering yield with angle of ion incidenceNuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 1985
- Sputtering yields for light ions as a function of angle of incidenceApplied Physics A, 1979