Innovative Carbon-Doped Composite Pavements with Sensing Capability and Low Environmental Impact for Multifunctional Infrastructures
Open Access
- 20 July 2021
- journal article
- research article
- Published by MDPI AG in Journal of Composites Science
- Vol. 5 (7) , 192
Abstract
Recently, smart composites that serve as multi-functional materials have gained popularity for structural and infrastructural applications yielding condition assessment capabilities. An emerging application is the monitoring and prediction of the fatigue of road infrastructure, where these systems may benefit from the ability to detect and estimate vehicle loads via weigh-in-motion (WIM) sensing without interrupting the traffic flow. However, off-the-shelf applications of WIM can be improved in terms of cost and durability, both on the hardware and software sides. This study proposes a novel multi-functional pavement material that can be utilized as a pavement embedded weigh-in-motion system. The material consists of a composite fabricated using an eco-friendly synthetic binder material called EVIzero, doped with carbon microfiber inclusions. The composite material is piezoresistive and, therefore, has strain-sensing capabilities. Compared to other existing strain-sensing structural materials, it is not affected by polarization and exhibits a more rapid response time. The study evaluates the monitoring capabilities of the novel composite according to the needs of a WIM system. A tailored data acquisition setup with distributed line electrodes is developed for the detection of moving loads. The aim of the paper is to demonstrate the sensing capabilities of the newly proposed composite pavement material and the suitability of the proposed monitoring system for traffic detection and WIM. Results demonstrate that the material is promising in terms of sensing and ready to be implemented in the field for further validation in the real world.Keywords
Funding Information
- Horizon 2020 (765057)
This publication has 41 references indexed in Scilit:
- Toward the microstructure–properties relationship in MWCNT/epoxy composites: Percolation behavior and dielectric spectroscopyComposites Science and Technology, 2014
- Risk-Based Approach for Optimum Maintenance of Bridges under Traffic and Earthquake LoadsJournal of Structural Engineering, 2013
- Integration and road tests of a self-sensing CNT concrete pavement system for traffic detectionSmart Materials and Structures, 2012
- Fatigue reliability assessment of steel bridge details integrating weigh-in-motion data and probabilistic finite element analysisComputers & Structures, 2012
- Carbon nanofibers for strain and impact damage sensing in glass fiber reinforced composites based on an unsaturated polyester resinPolymer Composites, 2011
- Study on the graphite and carbon fiber modified asphalt concreteConstruction and Building Materials, 2011
- Piezo-based weigh-in-motion system for the railway transportStructural Control and Health Monitoring, 2010
- Improving truck safety: Potential of weigh-in-motion technologyIATSS Research, 2010
- Bridge Reliability Assessment Based on MonitoringJournal of Bridge Engineering, 2008
- Self-monitoring application of asphalt concrete containing graphite and carbon fibersJournal of Wuhan University of Technology-Mater. Sci. Ed., 2008