Hasan Borke Birgin
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Hasan Borke Birgin has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Filippo Ubertini
University of Perugia
10 shared publications - Antonella D'ALessandro
Department of Civil and Environmental Engineering, University of Perugia, Via G. Duranti, 93, 06125 Perugia, Italy
9 shared publications - Simon Laflamme
Iowa State University
6 shared publications - Andrea Meoni
University of Perugia
2 shared publications - Enrique García-Macías
University of Granada
2 shared publications A. D’aLessandro
University of Perugia Department of Civil and Environmental Engineering
1 shared publication
Latest Publications
- Open Access
Self-powered weigh-in-motion system combining vibration energy harvesting and self-sensing composite pavements
Overloaded vehicles are the primary cause of accelerated degradation of road infrastructures. In this context, although weigh-in-motion (WIM) systems are most efficient to enforce weight regulations, current technologies require costly investments limiting their extensive implementation. Recent advances in multifunctional composites enabled cost-efficient alternatives in the form of smart pavements. Nevertheless, the need for a stable power supply still represents a major practical limitation. This work presents a novel proof-of-concept self-sustainable WIM technology combining smart pavements and vibration-based energy harvesting (EH). The feasibility of piezoelectric bimorph cantilevered beams to harvest traffic-induced vibrations is firstly investigated, followed by the demonstration of the proposed technology under laboratory conditions. The main original contributions of this work comprise (i) the development of a new self-powered data acquisition system, (ii) a novel approach for the fabrication and electromechanical testing of the piezoresistive composite pavement, and (iii) laboratory feasibility analysis of the developed EH unit to conduct traffic load identification through electrical resistivity measurements of the smart pavement. While the presented results conclude the need for dense EH networks or combinations of different EH technologies to attain complete self-sustainability, this work represents an initial feasibility evidence paving the way towards the development of self-powered low-cost WIM systems.
Open AccessSelf-powered weigh-in-motion system combining vibration energy harvesting and self-sensing composite pavements
Overloaded vehicles are the primary cause of accelerated degradation of road infrastructures. In this context, although weigh-in-motion (WIM) systems are most efficient to enforce weight regulations, current technologies require costly investments limiting their extensive implementation. Recent advances in multifunctional composites enabled cost-efficient alternatives in the form of smart pavements. Nevertheless, the need for a stable power supply still represents a major practical limitation. This work presents a novel proof-of-concept self-sustainable WIM technology combining smart pavements and vibration-based energy harvesting (EH). The feasibility of piezoelectric bimorph cantilevered beams to harvest traffic-induced vibrations is firstly investigated, followed by the demonstration of the proposed technology under laboratory conditions. The main original contributions of this work comprise (i) the development of a new self-powered data acquisition system, (ii) a novel approach for the fabrication and electromechanical testing of the piezoresistive composite pavement, and (iii) laboratory feasibility analysis of the developed EH unit to conduct traffic load identification through electrical resistivity measurements of the smart pavement. While the presented results conclude the need for dense EH networks or combinations of different EH technologies to attain complete self-sustainability, this work represents an initial feasibility evidence paving the way towards the development of self-powered low-cost WIM systems.
- Open Access
- 6 February 2023
- Published by MDPI AG in Journal of Composites Science
- Vol. 7 (2) , 63
Self-Sensing Eco-Earth Composite with Carbon Microfibers for Sustainable Smart Buildings
This paper proposes a new sustainable earth–cement building composite with multifunctional sensing features and investigates its properties through an experimental campaign. Earth and cement are proportioned as 2/7 in volume, while carbon microfibers are added in various amounts to achieve piezoresistivity, ranging from 0 to 1% with respect to the weight of the binder (i.e., earth + cement). The proposed material couples the construction performance with self-sensing properties in order to monitor the structural performance during the servile life of the building. The use of earth in the partial replacement of cement reduces the environmental footprint of the material while keeping sufficient mechanical properties, at least for applications that do not require a large load-bearing capacity (e.g., for plasters or for low-rise constructions). This paper analyzes the electrical and sensing behavior of cubic and beam samples through electrical and electromechanical tests. The results show that the samples with a filler percentage near the percolation zone, ranged between 0.025 and 0.25%, exhibit the best performance. From the cyclical compressive tests and linear developed models, it could be deduced that the filler content of 0.05% of carbon fibers, with respect to the binder weight, represents the best-performing smart composite for further investigation at higher scales. As demonstrated, the selected mix generated clear strain-sensing electrical signals, reaching gauge factors over 100.
- 6 February 2023
- Published by MDPI AG in Journal of Composites Science
- Vol. 7 (2) , 63
Open AccessSelf-Sensing Eco-Earth Composite with Carbon Microfibers for Sustainable Smart Buildings
This paper proposes a new sustainable earth–cement building composite with multifunctional sensing features and investigates its properties through an experimental campaign. Earth and cement are proportioned as 2/7 in volume, while carbon microfibers are added in various amounts to achieve piezoresistivity, ranging from 0 to 1% with respect to the weight of the binder (i.e., earth + cement). The proposed material couples the construction performance with self-sensing properties in order to monitor the structural performance during the servile life of the building. The use of earth in the partial replacement of cement reduces the environmental footprint of the material while keeping sufficient mechanical properties, at least for applications that do not require a large load-bearing capacity (e.g., for plasters or for low-rise constructions). This paper analyzes the electrical and sensing behavior of cubic and beam samples through electrical and electromechanical tests. The results show that the samples with a filler percentage near the percolation zone, ranged between 0.025 and 0.25%, exhibit the best performance. From the cyclical compressive tests and linear developed models, it could be deduced that the filler content of 0.05% of carbon fibers, with respect to the binder weight, represents the best-performing smart composite for further investigation at higher scales. As demonstrated, the selected mix generated clear strain-sensing electrical signals, reaching gauge factors over 100.
- Open Access
Carbon Microfiber-Doped Smart Concrete Sensors for Strain Monitoring in Reinforced Concrete Structures: An Experimental Study at Various Scales
Concrete constructions need widespread monitoring for the control of their state of integrity during their service life. In particular, after critical events such as earthquakes, this type of structure may experience the formation and development of cracks and damage. A quick and affordable assessment of structural behavior is indicated to identify conditions of danger for users and the incipient collapse of structural elements. This work presents investigations on multifunctional concretes with self-sensing capabilities to carry out static and dynamic monitoring. The materials were produced by the addition of conductive carbon microfibers to the concrete matrix. Electrical and sensing tests were carried out on samples with small-, medium-, and full-scale dimensions. The tests demonstrated the good electrical and electromechanical properties of the proposed smart concrete sensors, which appear promising for their use in civil elements or structures. In particular, tests on real-scale beams demonstrated the capability of the material to monitor the dynamic behavior of full-scale structural elements.
Open AccessCarbon Microfiber-Doped Smart Concrete Sensors for Strain Monitoring in Reinforced Concrete Structures: An Experimental Study at Various Scales
Concrete constructions need widespread monitoring for the control of their state of integrity during their service life. In particular, after critical events such as earthquakes, this type of structure may experience the formation and development of cracks and damage. A quick and affordable assessment of structural behavior is indicated to identify conditions of danger for users and the incipient collapse of structural elements. This work presents investigations on multifunctional concretes with self-sensing capabilities to carry out static and dynamic monitoring. The materials were produced by the addition of conductive carbon microfibers to the concrete matrix. Electrical and sensing tests were carried out on samples with small-, medium-, and full-scale dimensions. The tests demonstrated the good electrical and electromechanical properties of the proposed smart concrete sensors, which appear promising for their use in civil elements or structures. In particular, tests on real-scale beams demonstrated the capability of the material to monitor the dynamic behavior of full-scale structural elements.
- Open Access
- 19 May 2022
- Published by Springer Nature in Materials and Structures
- Vol. 55 (5) , 1-16
Self-sensing asphalt composite with carbon microfibers for smart weigh-in-motion
The need for ageing infrastructure monitoring has recently emerged as an urgent priority in many countries. Smart road infrastructure is a technology that could be used to address this issue by enabling on-time decisions such as condition-based maintenance. For example, automatic traffic monitoring could be beneficial by improving fatigue analysis, and maintenance priority planning and management of overloaded vehicles. This can be done through image-based traffic monitoring, weight measurements by static scales, and weigh-in-motion (WIM) stations. WIM can be used to identify and classify the type, the number, and the weight of vehicles passing over a given road segment without interrupting the traffic flow. The general drawbacks of existing WIM technologies are their high costs, low durability, and complex deployment. This paper proposes a new asphalt-like composite enabling self-sensing road pavements that can serve as a low-cost and durable WIM sensor. The proposed novel material consists of a commercial binder called EVIzero, doped with natural aggregates and carbon microfibers. These microfibers provide electrical conductivity and piezoresistive properties through electrical percolation. Here, both the material preparation for road applications and its electromechanical characterization are examined. Various cylindrical samples fabricated using different percentages of carbon microfibers were produced and investigated in order to evaluate their signal quality and strain sensing capabilities. It is found that the material mix fabricated with 1% carbon microfibers with respect to the binder weight has the best sensing performance due to electrical percolation. A mid-size slab sample is produced using this optimal mix in order to achieve a preliminary demonstration of material’s feasibility for WIM sensing. The results show that a linear relationship between the electrical response of the slab sample and the induced strain is established with an $$R^2$$ of 93%.- 19 May 2022
- Published by Springer Nature in Materials and Structures
- Vol. 55 (5) , 1-16
Open AccessSelf-sensing asphalt composite with carbon microfibers for smart weigh-in-motion
The need for ageing infrastructure monitoring has recently emerged as an urgent priority in many countries. Smart road infrastructure is a technology that could be used to address this issue by enabling on-time decisions such as condition-based maintenance. For example, automatic traffic monitoring could be beneficial by improving fatigue analysis, and maintenance priority planning and management of overloaded vehicles. This can be done through image-based traffic monitoring, weight measurements by static scales, and weigh-in-motion (WIM) stations. WIM can be used to identify and classify the type, the number, and the weight of vehicles passing over a given road segment without interrupting the traffic flow. The general drawbacks of existing WIM technologies are their high costs, low durability, and complex deployment. This paper proposes a new asphalt-like composite enabling self-sensing road pavements that can serve as a low-cost and durable WIM sensor. The proposed novel material consists of a commercial binder called EVIzero, doped with natural aggregates and carbon microfibers. These microfibers provide electrical conductivity and piezoresistive properties through electrical percolation. Here, both the material preparation for road applications and its electromechanical characterization are examined. Various cylindrical samples fabricated using different percentages of carbon microfibers were produced and investigated in order to evaluate their signal quality and strain sensing capabilities. It is found that the material mix fabricated with 1% carbon microfibers with respect to the binder weight has the best sensing performance due to electrical percolation. A mid-size slab sample is produced using this optimal mix in order to achieve a preliminary demonstration of material’s feasibility for WIM sensing. The results show that a linear relationship between the electrical response of the slab sample and the induced strain is established with an $$R^2$$ of 93%. - Open Access
- 25 March 2022
- Published by MDPI AG in Infrastructures
- Vol. 7 (4) , 48
Smart Infrastructure Monitoring through Self-Sensing Composite Sensors and Systems: A Study on Smart Concrete Sensors with Varying Carbon-Based Filler
Structural Health Monitoring allows an automated performance assessment of buildings and infrastructures, both during their service lives and after critical events, such as earthquakes or landslides. The strength of this technology is in the diffuse nature of the sensing outputs that can be achieved for a full-scale structure. Traditional sensors adopted for monitoring purposes possess peculiar drawbacks related to placement and maintenance issues. Smart construction materials, which are able to monitor their states of strain and stress, represent a possible solution to these issues, increasing the durability and reliability of the monitoring system through embedding or the bulk fabrication of smart structures. The potentialities of such novel sensors and systems are based on their reliability and flexibility. Indeed, due to their peculiar characteristics, they can combine mechanical and sensing properties. We present a study on the optimization and the characterization of construction materials doped with different types of fillers for developing a novel class of sensors able to correlate variations of external strains to variations of electrical signals. This paper presents the results of an experimental investigation of composite samples at small and medium scales, made of cementitious materials with carbon-based inclusions. Different from a previous work by the authors, different carbon-based filler composite sensors are first compared at a small cubic sample scale and then tailored for larger plate specimens. Possible applications are in the strain/stress monitoring, damage detection, and load monitoring of concrete buildings and infrastructures.
- 25 March 2022
- Published by MDPI AG in Infrastructures
- Vol. 7 (4) , 48
Open AccessSmart Infrastructure Monitoring through Self-Sensing Composite Sensors and Systems: A Study on Smart Concrete Sensors with Varying Carbon-Based Filler
Structural Health Monitoring allows an automated performance assessment of buildings and infrastructures, both during their service lives and after critical events, such as earthquakes or landslides. The strength of this technology is in the diffuse nature of the sensing outputs that can be achieved for a full-scale structure. Traditional sensors adopted for monitoring purposes possess peculiar drawbacks related to placement and maintenance issues. Smart construction materials, which are able to monitor their states of strain and stress, represent a possible solution to these issues, increasing the durability and reliability of the monitoring system through embedding or the bulk fabrication of smart structures. The potentialities of such novel sensors and systems are based on their reliability and flexibility. Indeed, due to their peculiar characteristics, they can combine mechanical and sensing properties. We present a study on the optimization and the characterization of construction materials doped with different types of fillers for developing a novel class of sensors able to correlate variations of external strains to variations of electrical signals. This paper presents the results of an experimental investigation of composite samples at small and medium scales, made of cementitious materials with carbon-based inclusions. Different from a previous work by the authors, different carbon-based filler composite sensors are first compared at a small cubic sample scale and then tailored for larger plate specimens. Possible applications are in the strain/stress monitoring, damage detection, and load monitoring of concrete buildings and infrastructures.
- Open Access
- 20 July 2021
- Published by MDPI AG in Journal of Composites Science
- Vol. 5 (7) , 192
Innovative Carbon-Doped Composite Pavements with Sensing Capability and Low Environmental Impact for Multifunctional Infrastructures
Recently, smart composites that serve as multi-functional materials have gained popularity for structural and infrastructural applications yielding condition assessment capabilities. An emerging application is the monitoring and prediction of the fatigue of road infrastructure, where these systems may benefit from the ability to detect and estimate vehicle loads via weigh-in-motion (WIM) sensing without interrupting the traffic flow. However, off-the-shelf applications of WIM can be improved in terms of cost and durability, both on the hardware and software sides. This study proposes a novel multi-functional pavement material that can be utilized as a pavement embedded weigh-in-motion system. The material consists of a composite fabricated using an eco-friendly synthetic binder material called EVIzero, doped with carbon microfiber inclusions. The composite material is piezoresistive and, therefore, has strain-sensing capabilities. Compared to other existing strain-sensing structural materials, it is not affected by polarization and exhibits a more rapid response time. The study evaluates the monitoring capabilities of the novel composite according to the needs of a WIM system. A tailored data acquisition setup with distributed line electrodes is developed for the detection of moving loads. The aim of the paper is to demonstrate the sensing capabilities of the newly proposed composite pavement material and the suitability of the proposed monitoring system for traffic detection and WIM. Results demonstrate that the material is promising in terms of sensing and ready to be implemented in the field for further validation in the real world.
- 20 July 2021
- Published by MDPI AG in Journal of Composites Science
- Vol. 5 (7) , 192
Open AccessInnovative Carbon-Doped Composite Pavements with Sensing Capability and Low Environmental Impact for Multifunctional Infrastructures
Recently, smart composites that serve as multi-functional materials have gained popularity for structural and infrastructural applications yielding condition assessment capabilities. An emerging application is the monitoring and prediction of the fatigue of road infrastructure, where these systems may benefit from the ability to detect and estimate vehicle loads via weigh-in-motion (WIM) sensing without interrupting the traffic flow. However, off-the-shelf applications of WIM can be improved in terms of cost and durability, both on the hardware and software sides. This study proposes a novel multi-functional pavement material that can be utilized as a pavement embedded weigh-in-motion system. The material consists of a composite fabricated using an eco-friendly synthetic binder material called EVIzero, doped with carbon microfiber inclusions. The composite material is piezoresistive and, therefore, has strain-sensing capabilities. Compared to other existing strain-sensing structural materials, it is not affected by polarization and exhibits a more rapid response time. The study evaluates the monitoring capabilities of the novel composite according to the needs of a WIM system. A tailored data acquisition setup with distributed line electrodes is developed for the detection of moving loads. The aim of the paper is to demonstrate the sensing capabilities of the newly proposed composite pavement material and the suitability of the proposed monitoring system for traffic detection and WIM. Results demonstrate that the material is promising in terms of sensing and ready to be implemented in the field for further validation in the real world.
- Open Access
Hybrid Carbon Microfibers-Graphite Fillers for Piezoresistive Cementitious Composites
Multifunctional structural materials are very promising in the field of engineering. Particularly, their strain sensing ability draws much attention for structural health monitoring applications. Generally, strain sensing materials are produced by adding a certain amount of conductive fillers, around the so-called “percolation threshold”, to the cement or composite matrix. Recently, graphite has been found to be a suitable filler for strain sensing. However, graphite requires high amounts of doping to reach percolation threshold. In order to decrease the amount of inclusions, this paper proposes cementitious materials doped with new hybrid carbon inclusions, i.e., graphite and carbon microfibers. Carbon microfibers having higher aspect ratio than graphite accelerate the percolation threshold of the graphite particles without incurring into dispersion issues. The resistivity and strain sensitivity of different fibers’ compositions are investigated. The electromechanical tests reveal that, when combined, carbon microfibers and graphite hybrid fillers reach to percolation faster and exhibit higher gauge factors and enhanced linearity.
Open AccessHybrid Carbon Microfibers-Graphite Fillers for Piezoresistive Cementitious Composites
Multifunctional structural materials are very promising in the field of engineering. Particularly, their strain sensing ability draws much attention for structural health monitoring applications. Generally, strain sensing materials are produced by adding a certain amount of conductive fillers, around the so-called “percolation threshold”, to the cement or composite matrix. Recently, graphite has been found to be a suitable filler for strain sensing. However, graphite requires high amounts of doping to reach percolation threshold. In order to decrease the amount of inclusions, this paper proposes cementitious materials doped with new hybrid carbon inclusions, i.e., graphite and carbon microfibers. Carbon microfibers having higher aspect ratio than graphite accelerate the percolation threshold of the graphite particles without incurring into dispersion issues. The resistivity and strain sensitivity of different fibers’ compositions are investigated. The electromechanical tests reveal that, when combined, carbon microfibers and graphite hybrid fillers reach to percolation faster and exhibit higher gauge factors and enhanced linearity.
- 11 January 2021
- Published by Springer Nature
- p. 861-869
Graphite-Cement Composites as Low-Cost Strain Sensing Multifunctional Materials
- 11 January 2021
- Published by Springer Nature
- p. 861-869
Graphite-Cement Composites as Low-Cost Strain Sensing Multifunctional Materials
- Open Access
Smart Graphite–Cement Composite for Roadway-Integrated Weigh-In-Motion Sensing
Smart multifunctional composites exhibit enhanced physical and mechanical properties and can provide structures with new capabilities. The authors have recently initiated a research program aimed at developing new strain-sensing pavement materials enabling roadway-integrated weigh-in motion (WIM) sensing. The goal is to achieve an accurate WIM for infrastructure monitoring at lower costs and with enhanced durability compared to off-the-shelf solutions. Previous work was devoted to formulating a signal processing algorithm for estimating the axle number and weights, along with the vehicle speed based on the outputs of a piezoresistive pavement material deployed within a bridge deck. This work proposes and characterizes a suitable low-cost and highly scalable cement-based composite with strain-sensing capabilities and sufficient sensitivity to meet WIM signal requirements. Graphite cement-based smart composites are presented, and their electromechanical properties are investigated in view of their application to WIM. These composites are engineered for scalability owing to the ease of dispersion of the graphite powder in the cement matrix, and can thus be used to build smart sections of road pavements. The research presented in this paper consists of electromechanical tests performed on samples of different amounts of graphite for the identification of the optimal mix in terms of signal sensitivity. An optimum inclusion level of 20% by weight of cement is obtained and selected for the fabrication of a plate of 30 × 15 × 5 cm3. Results from load identification tests conducted on the plate show that the proposed technology is capable of WIM.
Open AccessSmart Graphite–Cement Composite for Roadway-Integrated Weigh-In-Motion Sensing
Smart multifunctional composites exhibit enhanced physical and mechanical properties and can provide structures with new capabilities. The authors have recently initiated a research program aimed at developing new strain-sensing pavement materials enabling roadway-integrated weigh-in motion (WIM) sensing. The goal is to achieve an accurate WIM for infrastructure monitoring at lower costs and with enhanced durability compared to off-the-shelf solutions. Previous work was devoted to formulating a signal processing algorithm for estimating the axle number and weights, along with the vehicle speed based on the outputs of a piezoresistive pavement material deployed within a bridge deck. This work proposes and characterizes a suitable low-cost and highly scalable cement-based composite with strain-sensing capabilities and sufficient sensitivity to meet WIM signal requirements. Graphite cement-based smart composites are presented, and their electromechanical properties are investigated in view of their application to WIM. These composites are engineered for scalability owing to the ease of dispersion of the graphite powder in the cement matrix, and can thus be used to build smart sections of road pavements. The research presented in this paper consists of electromechanical tests performed on samples of different amounts of graphite for the identification of the optimal mix in terms of signal sensitivity. An optimum inclusion level of 20% by weight of cement is obtained and selected for the fabrication of a plate of 30 × 15 × 5 cm3. Results from load identification tests conducted on the plate show that the proposed technology is capable of WIM.