Influence of Na on grain boundary and properties of Cu(In,Ga)Se2 solar cells
- 20 February 2017
- journal article
- research article
- Published by Wiley in Progress in Photovoltaics: Research and Applications
- Vol. 25 (5) , 367-375
Abstract
Whether added from external sources or supplied via substrate, incorporation of Na has always improved the conversion efficiency of polycrystalline thin‐film Cu(In,Ga)Se2 (CIGS) solar cells. Segregation of Na along grain boundary (GB) is thought to be one of the main reasons for better efficiency, and changing its concentration levels may tune the device properties accordingly. Our previous works have shown that changes in GB chemistry over various Ga/In concentrations are the main reason for poor performance of Ga‐rich (18%) CIGS, besides its optimum band gap (1.4 eV) for energy conversion. It was suspected that changes in GB chemistry or device performance or both could be driven by variation in Na concentration at GB. In this research, atomic level fluctuations of Na atoms at GB for various CuIn1−xGaxSe2 thin films were measured accurately with atom probe tomography technique. Fluctuations observed in Na concentration at GB are restricted to the range 0.5–6.5 atoms per nm2 and is irrespective of x value (GGI) and GB surface density. Results also show that changes in GB chemistry for similar CIGS compositions are not necessary due to changes in Na concentration levels at GB. However, an increased density of GBs per unit volume with GGI may indicate an overall rise in Na in thin films and could explain the drop in CIGS performance. Copyright © 2017 John Wiley & Sons, Ltd.Keywords
This publication has 32 references indexed in Scilit:
- New world record efficiency for Cu(In,Ga)Se2 thin‐film solar cells beyond 20%Progress in Photovoltaics: Research and Applications, 2011
- Impact of the Ga concentration on the microstructure of CuIn1–xGaxSe2Physica Status Solidi (RRL) – Rapid Research Letters, 2008
- 19·9%‐efficient ZnO/CdS/CuInGaSe2 solar cell with 81·2% fill factorProgress in Photovoltaics: Research and Applications, 2008
- On the capability of revealing the pseudosymmetry of the chalcopyrite‐type crystal structureCrystal Research and Technology, 2008
- Efficiency limits for single-junction and tandem solar cellsSolar Energy Materials and Solar Cells, 2006
- The effect of Na in polycrystalline and epitaxial single-crystal CuIn1−xGaxSe2Thin Solid Films, 2005
- Anomalous Grain Boundary Physics in Polycrystalline: The Existence of a Hole BarrierPhysical Review Letters, 2003
- Properties of 19.2% efficiency ZnO/CdS/CuInGaSe2thin‐film solar cellsProgress in Photovoltaics: Research and Applications, 2003
- Measurement of the Gibbsian interfacial excess of solute at an interface of arbitrary geometry using three-dimensional atom probe microscopyMaterials Science and Engineering: A, 2002
- Phase Diagram and Optical Energy Gaps for CuInyGa1−ySe2 AlloysPhysica Status Solidi (a), 1991