Fracture Strength of CAD/CAM Endocrown and Post-Core Restorations with Fiber Strip Reinforcement in Mandibular Premolars
Open Access
- 17 May 2026
- journal article
- research article
- Published by MDPI AG in Journal of Functional Biomaterials
- Vol. 17 (5) , 248
Abstract
This study evaluated the effects of restorative material, restoration type, and fiber strip reinforcement on the fracture strength (FS) of endocrown (EC) and post-core (PC) restorations in endodontically treated premolars. Specimens were allocated according to restorative material [resin-nanoceramic (RNC) or feldspathic ceramic (FC)], restoration type (EC or PC), and reinforcement [fiber strip-reinforced (FR) or -non-reinforced (NF)]. FS was determined using a universal testing machine under axial loading. Statistical analysis was performed using three-way ANOVA and Bonferroni tests (α = 0.05). Material, restoration type, and reinforcement significantly affected FS (p < 0.05). RNC restorations exhibited higher FS than FC restorations (861 ± 181 N vs. 715 ± 212 N; p < 0.001). EC restorations exhibited higher FS than PC restorations (828 ± 173 N vs. 748 ± 236 N; p = 0.046). FR groups exhibited higher FS than NF groups (848 ± 180 N vs. 728 ± 222 N; p = 0.003). The highest FS was observed in the RNC–PC–FR group (965 ± 144 N), whereas the lowest occurred in the FC–PC–NF group (480 ± 177 N). Although EC restorations showed higher FS than PC restorations, the effect of restoration type depended on material and reinforcement.Keywords
This publication has 79 references indexed in Scilit:
- Biomechanical influence of residual lateral wall thickness and resin reinforcement on the performance of endocrowns in premolarsDental Materials, 2025
- Effect of elastic gradients on the fracture resistance of tri-layer restorative systemsDental Materials, 2024
- Exploring the influence of placing bi-directional E-glass fibers as protective layer under a CAD-CAM resin composite on the fracture patternDental Materials, 2023
- Post-fatigue fracture load, stress concentration and mechanical properties of feldspathic, leucite- and lithium disilicate-reinforced glass ceramicsHeliyon, 2023
- Fiber-reinforced composites in dentistry – An insight into adhesion aspects of the material and the restored tooth constructDental Materials, 2023
- A numerical, theoretical and experimental study of the effect of thermocycling on the matrix-filler interface of dental restorative materialsDental Materials, 2021
- Degree of conversion and cross‐link density within a resin‐matrix compositeJournal of Biomedical Materials Research Part B: Applied Biomaterials, 2017
- High-aspect ratio fillers: Fiber-reinforced composites and their anisotropic propertiesDental Materials, 2015
- The fracture resistance of a CAD/CAM Resin Nano Ceramic (RNC) and a CAD ceramic at different thicknessesDental Materials, 2014
- Correlation of clinical performance with ‘in vitro tests’ of restorative dental materials that use polymer-based matricesDental Materials, 2012