KYKerem Yılmaz

Kerem Yılmaz

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Kerem Yılmaz has a total of 38 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Fracture Strength of CAD/CAM Endocrown and Post-Core Restorations with Fiber Strip Reinforcement in Mandibular Premolars

    by Kerem Yılmaz, Hakan Aydın, Zeynep Soylu, Özge Çiloğlu, Esma Fatıma Delican, Mehmet Mustafa Özarslan, Fehmi Gönüldaş

    This study evaluated the effects of restorative material, restoration type, and fiber strip reinforcement on the fracture strength (FS) of endocrown (EC) and post-core (PC) restorations in endodontically treated premolars. Specimens were allocated according to restorative material [resin-nanoceramic (RNC) or feldspathic ceramic (FC)], restoration type (EC or PC), and reinforcement [fiber strip-reinforced (FR) or -non-reinforced (NF)]. FS was determined using a universal testing machine under axial loading. Statistical analysis was performed using three-way ANOVA and Bonferroni tests (α = 0.05). Material, restoration type, and reinforcement significantly affected FS (p < 0.05). RNC restorations exhibited higher FS than FC restorations (861 ± 181 N vs. 715 ± 212 N; p < 0.001). EC restorations exhibited higher FS than PC restorations (828 ± 173 N vs. 748 ± 236 N; p = 0.046). FR groups exhibited higher FS than NF groups (848 ± 180 N vs. 728 ± 222 N; p = 0.003). The highest FS was observed in the RNC–PC–FR group (965 ± 144 N), whereas the lowest occurred in the FC–PC–NF group (480 ± 177 N). Although EC restorations showed higher FS than PC restorations, the effect of restoration type depended on material and reinforcement.

  • Open Access

    Computational Evaluation of Stress Distribution in Endocrown-Restored Immature Mandibular Molars: A Finite Element Approach

    by Beyza Ballı Akgöl, Hakan Aydın, Kerem Yılmaz, Gökçe Özcan Altınsoy

    A three-dimensional finite element analysis (FEA) was performed to evaluate stress accumulation and distribution in endodontically treated immature and mature mandibular molars restored with endocrowns. Three tooth models representing different stages of root development (Cvek 2, Cvek 3, and mature) were generated from cone-beam computed tomography data. Endocrowns were fabricated using lithium disilicate (LDS) and resin nanoceramic (RNC). In immature teeth, two apexification strategies were simulated: a 3 mm mineral trioxide aggregate (MTA) apical plug followed by gutta-percha obturation, and complete canal obturation with MTA. All models were subjected to axial (600 N) and oblique (200 N) loading. A total of 20 finite element models were analysed. Endocrown material and loading direction were the main factors affecting von Mises stress distribution, whereas root development stage and apexification technique showed limited influence. LDS resulted in reduced stress transmission to the residual dentin, despite higher stress accumulation within the restoration itself. In the LDS groups, von Mises stress values in the root dentin ranged from 35.24 to 35.96 MPa under oblique and from 42.93 to 44.45 MPa under axial loading, while the RNC group exhibited higher values (39.36–40.40 MPa and 51.59–53.66 MPa, respectively). These findings indicate that endocrown restoration after apexification is a reliable treatment option for immature mandibular molars with extensive structural loss, with LDS demonstrating more favorable biomechanical behavior.


  • Open Access

    Effects of Apple Vinegar, Mouthwashes, and Bleaching on Color Stability and Surface Properties of Fiber-Reinforced and Non-Reinforced Restorative Materials

    by Kerem Yılmaz, Tuğçe Odabaş Hajiyev, Gökçe Özcan Altınsoy, Mehmet Mustafa Özarslan

    The aim of this study was to investigate the effects of apple cider vinegar (ACV), various mouthwashes and bleaching on the color and surface roughness of fiber strip-reinforced and unreinforced restorative materials. The materials were resin composite (RC), resin-nanoceramic (RNC), and polymer-infiltrated ceramic network (PICN); the mouthwashes were chlorhexidine with alcohol (CXA), chlorhexidine without alcohol (CX), herbal with alcohol (HRA), and herbal without alcohol (HR). Measurements were performed at T0 (baseline), T1 (1 day), T2 (2.5 days) and T3 (after bleaching). Analysis of variance (ANOVA) and Bonferroni analyses revealed that roughness from T0–T3 was highest for RNC and lowest for PICN. Regarding the solutions, the highest increase was in ACV and lowest in artificial saliva (p < 0.001). At T0–T2, color change (ΔE00) and whiteness index change (ΔWID) were highest in CXA and lowest in HR. At T2–T3, ΔE00 was highest in ACV, while ΔWID was highest in CXA (p < 0.001). Although the roughness exceeded the bacterial adhesion threshold, the effect of bleaching was not considerable. Color and whiteness changes generally did not exceed the acceptability threshold. Fiber strip position did not affect roughness. However, a strip in the middle layer had higher impact on color and whiteness than the one in the top layer.


  • Open Access

    Effects of Apple Vinegar, Mouthwashes, and Bleaching on Color Stability and Surface Properties of Fiber-Reinforced and Non-Reinforced Restorative Materials

    by Kerem Yılmaz, Tuğçe Odabaş Hajiyev, Gökçe Özcan Altınsoy, Mehmet Mustafa Özarslan

    The aim of this study was to investigate the effects of apple cider vinegar (ACV), vari-ous mouthwashes and bleaching on the color and surface roughness of fiber rib-bon-reinforced and unreinforced restorative materials. The materials were resin com-posite (RC), resin-nanoceramic (RNC), and polymer-infiltrated ceramic network (PICN); the mouthwashes were chlorhexidine with alcohol (CXA), chlorhexidine without alcohol (CX), herbal with alcohol (HRA), and herbal without alcohol (HR). Measurements were taken at T0 (baseline), T1 (1 day), T2 (2.5 days) and T3 (after bleaching). ANOVA and Bonferroni analyses revealed that roughness from T0–T3 was highest for RNC and lowest for PICN. Regarding the solutions, the highest increase was in ACV and lowest in artificial saliva (p < 0.001). At T0–T2, ΔE00 and ΔWID were highest in CXA and lowest in HR. At T2–T3, ΔE00 was highest in ACV, while ΔWID was highest in CXA (p < 0.001). Although the roughness exceeded the bacterial adhesion threshold, the effect of bleaching was not considerable. Color and whiteness changes generally did not exceed the acceptability threshold. Fiber ribbon position did not af-fect roughness. However, a ribbon in middle layer had higher impact on color and whiteness than one in the top layer.


  • The Effect of Various Beverages, Acidulated Phosphate Fluoride and Home Bleaching on the Color of Restorative Materials

    by Kerem Yılmaz, Fehmi Gönüldaş

    Purpose: To investigate the effect of acidic beverage, home bleaching, acidulated phosphate fluoride (APF), and immune-boosting beverage with Sambucus Nigra on color of restorative materials. Materials and Methods: 84 nanohybrid composite resin (NCR) and CAD-CAM feldspathic ceramic (FC) specimens (1.5 mm-thick) were prepared. The specimens were first subdivided into FCA, FCB, NCRA, NCRB, then distilled water (DIS), lemon juice (LEJ), home bleaching (BA). Measurements were taken after 2 weeks of applications (App1). After App1, FCA and NCRA were kept in Sambucus Nigra beverage (SAM), while FCB and NCRB were kept in SAM after APF (APFSAM). Measurements were taken on 12th and 24th day (App2). The effects on color of App1 and App1+App2 were analyzed by ANOVA and Bonferroni tests. Results: For App1, the effect of material, App1 and material-App1 on color was statistically significant (p

  • Open Access

    Effect of Pulpal Base, Restorative Material, and Preparation Type on Marginal and Internal Fit and Fracture Strength of Endocrowns

    by Kerem Yılmaz, Hakan Aydın, Fehmi Gönüldaş, Sukan Kara, Özge Çiloğlu, Erdem Özdemir, Zeynep Bilen

    The aim of this innovative study was to investigate the feasibility of a modified butt joint preparation with two grooves instead of a ferrule when root dentin tissue is limited in mandibular molars. It was also investigated to what extent the effect of these treatment options on marginal and internal fit and fracture strength (FS) varied according to the type of material and whether or not a fiber ribbon was used at the base. Marginal and internal fit were evaluated using the triple-scan protocol. Statistical analysis was conducted via a three-way analysis of variance (ANOVA). The absolute marginal discrepancy (AMD), marginal discrepancy, and overall fit values for the ceramic group were 127 μm, 108 μm, and 120 μm, respectively, while corresponding values for the hybrid ceramic group were 139 μm, 116 μm, and 130 μm (p < 0.05). The mean FS recorded for ceramic restorations was 662 N, whereas hybrid ceramic restorations demonstrated a significantly higher FS of 903 N (p < 0.001). When material type was assessed independently of preparation design and base configuration, both ceramic and hybrid ceramic exceeded the predefined clinical acceptability threshold for AMD; however, they remained within acceptable limits for the remaining parameters. Among the evaluated configurations, hybrid ceramic restorations incorporating ferrules and fiber-reinforced bases exhibited the highest FS values, whereas ceramic restorations with modified biological widths and lacking fiber reinforcement yielded the lowest FS values.


  • Open Access

    The Effect of a Microencapsulated Iron Supplement, Hydrogen Peroxide Superior and Professional Dental Prophylaxis on the Color and Whiteness of Teeth

    by Kerem Yılmaz, Fehmi Gönüldaş, Zeynep Bilen

    Purpose: To investigate the effect of a microencapsulated liposomal nano-iron supplement, an Fe+2 supplement, black tea, a bleaching agent with a new composition and professional dental prophylaxis (PDP) on tooth color and whiteness change. Materials and Methods: 84 extracted teeth were immersed in liposomal iron, Fe+2 and black tea solutions by special apparatus. Then different applications were applied: (1) no treatment, (2) water polishing, (3) PDP, (4) bleaching with 25% hydrogen peroxide superior (HPS). Measurements were taken at baseline, 2nd, 4th, 8th week and after applications. Statistical analysis of color and whiteness changes was performed by ANOVA and Bonferroni tests (α=0.05). Results: The effects of time, application, beverage and their interactions on color and whiteness were statistically significant (p


  • Open Access

    Effect of Pulpal Base, Restorative Material and Preparation Type on Marginal and Internal Fit and Fracture Strength of Endocrowns

    by Kerem Yılmaz, Hakan Aydin, Fehmi Gonuldas, Sukan Kara, Özge Çiloğlu, Erdem Özdemir, Zeynep Bilen

    The aim of this study was to investigate the effect of base material, restorative material and finish line on marginal and internal fit and fracture strength (FS) of endocrowns (N = 64). The restorative materials were ceramic and hybrid ceramic, the preparations were ferrule and modified butt joint (BJ) with two grooves, and the bases were with and without fiber ribbon. Marginal and internal fit were assessed using the triple scan. Statistical analyses were performed using three-way ANOVA. The absolute marginal discrepancy (AMD), marginal discrepancy and overall fit values obtained for ceramic were 127 µm, 108 µm and 120 µm, whereas those obtained for hybrid ceramic were 139 µm, 116 µm and 130 µm, respectively (p < 0.05). The overall FS obtained for ceramic was 662 N, whereas that for hybrid ceramic was 903 N (p < 0.001). When the material was evaluated regardless of preparation and base, ceramic and hybrid ceramic exceeded the selected clinical acceptability threshold for AMD, but did not exceed it for other parameters. Hybrid ceramic restorations with ferrules and fiber bases tended to provide the highest FS, whereas ceramic restorations with modified BJs and without fiber bases tended to provide the lowest FS.


  • Open Access

    Effects of a modified margin design, material, and loading type on the stress distribution of endocrowns: A 3D finite element analysis

    by Kerem Yilmaz, Hakan Aydin, Erdem Özdemi̇r

    In this innovative study, the ferrule design for endocrowns was compared with a new preparation design with tetra-corner retention grooves at each corner of the access cavity, and the 3D finite element method was used for analysis. Resin nanoceramic (RNC), lithium disilicate glass-ceramic (LDS), polyetheretherketone (PEEK), and polymer-infiltrated ceramic network (PICN) materials were investigated. The new design significantly reduced the stress for LDS and PICN in axial and oblique loadings. On remaining tooth tissues, the tetra-corner retention groove design increased the stress peak for RNC and PEEK compared to the ferrule, while it decreased the stress for LDS and PICN under both forces. It was concluded that the new, modified preparation design could be used as an alternative design to the ferrule.


  • Open Access

    Effect of Beverages with Increased Consumption Since COVID-19 Pandemic on the Color of CAD/CAM Acrylic Resin and Bis-Acryl-Based Material: An in vitro Study

    by Kerem Yilmaz, Erdem Özdemi̇r, Burak Yilmaz

    Objective: To evaluate the effect of energizing, body resistance-increasing, immune-boosting beverages, multivitamin effervescent, black tea on the color of three bis-acrylic resin composite (BRC) and one computer aided design-computer aided manufacturing (CAD/CAM) polymethyl methacrylate (PMMA) material. Material and Methods: 168 rectangular specimens (2 mm thick) were prepared in (i) BRC1 (Oratemp), (ii) BRC2 (PrimmaArt), (iii) BRC3 (Hexa-Temp), (iv) PMMA (Eray PMMA Disc) (n=42). After baseline color measurements, the specimens were immersed in various beverages. On the 1st, 14th, 28th days, color measurements were repeated. Discolorations were calculated by CIEDE2000 and CIELAB formulas and analyzed by variance and Bonferroni tests (α=0.05). Results: The ΔEab and ΔE00 results of material, beverage and material-beverage pair at days 1, 14 and 28 were statistically significant (pBRC1 (ΔE00=1.5, ΔEab=2.6) (p<0.0001). Conclusion: Black tea and multivitamin may discolor the interim restorations more than energizing, body resistance-increasing, immune-boosting beverages. Regardless of the time point, CAD/CAM PMMA was more resistant to discoloration than tested bis-acrylic resin composites (p<0.005). Regardless of the time point, distilled water was more resistant to discoloration than tested other beverages (p<0.0001).