The influence of geometric parameters of the cutting tool on the accuracy indicators when sawing with band saws
Open Access
- 26 December 2025
- journal article
- Published by Voronezh State University of Forestry and Technologies named after G.F. Morozov in Forestry Engineering Journal
- Vol. 15 (4) , 405-420
Abstract
Mproving sawing accuracy on band saw machines is an important task for the sawmill industry, especially for small and medium-sized enterprises. Kerf waviness leads to significant wood losses during subsequent mechanical processing, which can be several times higher than the losses from the kerf width itself. Current standards do not account for this parameter, which necessitates the development of new technical solutions. To improve the accuracy of the sawing process and reduce kerf waviness when cutting round timber by optimizing the geometric parameters of the band saw teeth. An experimental study was conducted on the influence of band saw tooth geometry on the sawing accuracy of pine logs using the "Spectr 70" horizontal band saw machine. A design of an experimental saw with an optimized tooth profile was developed. It was found that the degree of waviness increases as the cut progresses through the log and as the tool becomes dull. The use of the experimental saw reduces kerf waviness by 7-10% and decreases wood losses during subsequent processing. The results of the work can be used to improve the efficiency of sawlog processing on small-sized sawmill equipment.Keywords
This publication has 11 references indexed in Scilit:
- Improving the Performance of Band Saws by Local Thermophysical Effects on the BladeLesnoy Zhurnal (Forestry Journal), 2024
- Fatigue Strength of Band SawsLesnoy Zhurnal (Forestry Journal), 2023
- Capacity of surface production of band sawing in manufacture of oak floor upper layersBioResources, 2023
- Stress Concentration Factors of Concrete-Filled T-Joints under In-Plane Bending: Experiments, FE Analysis and FormulaeMaterials, 2022
- Minor cutting edge angles of sawing teeth: effect on cutting forces in woodEuropean Journal of Wood and Wood Products, 2022
- Minor cutting edge force contribution in wood bandsawingJournal of Wood Science, 2022
- Lateral forces determine dimensional accuracy of the narrow-kerf sawing of woodScientific Reports, 2022
- Recovering Evaluation of Narrow-Kerf Teeth of Mini Sash Gang SawsMaterials, 2021
- Slope aspect and altitude effect on selected soil organic matter characteristics in Beskid Mountains forest soilsFolia Forestalia Polonica, 2021
- Effects of gluing conditions for formaldehyde-free tannin adhesive on the oriented bamboo scrimber board propertiesEuropean Journal of Wood and Wood Products, 2021