Assessment of aerial and underground vibration transmission in mechanically trunk shaken olive trees
Open Access
- 19 February 2018
- journal article
- research article
- Published by PAGEPress Publications in Journal of Agricultural Engineering
- Vol. 49 (3) , 191-197
Abstract
The present study analyses the transmission of vibrations generated from a multidirectional trunk shaker to olive tree structure considering both the aerial zone (trunk and branches) and the underground zone (the coarse root). The vibration characterization was conducted by measuring acceleration on several points of the tree during harvesting operations. The influence of two different heights of shaker head clamping was analysed. In addition, a dynamic probing was performed in order to evaluate soil compaction. The results showed that the vibration performed by the trunk shaker head, corresponding to an acceleration resultant of approximately 77 ms–2 with a dominant vibration frequency of 18 Hz, increased up to 106% in branches and decreased up to 90% in trunks. At root level, where the analysis was carried out at 1/3 and 2/3 of the coarse root length, the acceleration values diminished significantly to 17 ms–2 and 12 ms–2, respectively. Soil dynamic resistance was lower (36 kg cm–2) near the trees than between the trees (53 kg cm–2). The vibration transmission to the aerial and the underground parts diversely influences the dynamic behaviour of the olive tree, considering an operational frequency of a commercial trunk shaker. The assessment of vibration transmission to the aerial part could contribute to improve fruit detachment and reduce branch breaking and leaf detachment. While vibration transmission to the underground part rises new challenges considering soil compaction in olive groves.Keywords
This publication has 20 references indexed in Scilit:
- Harvesting system sustainability in Mediterranean olive cultivationScience of The Total Environment, 2018
- Frequency response of late-season ‘Valencia’ orange to selective harvesting by vibration for juice industryBiosystems Engineering, 2017
- Effect of catching surface and tilt angle on bruise damage of sweet cherry due to mechanical impactComputers and Electronics in Agriculture, 2016
- Suitability of Spanish ‘Manzanilla’ table olive orchards for trunk shaker harvestingBiosystems Engineering, 2015
- Traditional olive tree response to oil olive harvesting technologiesBiosystems Engineering, 2014
- Energy efficacy analysis of a mechanical shaker in sweet cherry harvestingBiosystems Engineering, 2013
- Finite elements modeling of olive tree mechanical harvesting using different shakersTrees, 2013
- Dynamic responses of sweet cherry trees under vibratory excitationsBiosystems Engineering, 2012
- Elastic constants measurement of anisotropic Olivier wood plates using air-coupled transducers generated Lamb wave and ultrasonic bulk waveUltrasonics, 2010
- Traditional olive orchards on sloping land: Sustainability or abandonment?Journal of Environmental Management, 2008