A Fragmentation Criterion for the Interface of a Hydrostatic Extruded Al-Mg-Compound
Open Access
Abstract
Due to the higher demand for energy efficient products, light-weight constructions have become more important in recent years. An innovative, hydrostatic extruded Al-Mg-compound used here combines the corrosion resistance of aluminium with the outstanding lightweight properties of magnesium. During the production process, a thin boundary layer is built between the two basic materials. Investigations on further hot forming processing revealed a good formability of these compounds despite the fact that the boundary layer splits into fragments during forging and a new secondary boundary layer is built when the basic materials between the fragments come into contact again during the continuous deformation. The aim of the research is now to investigate fragmentation depending on the deformation rate and boundary layer thickness, which increases during the heat-up process in preparation of forging. For this purpose, a channel compression test is used in conjunction with a special newly developed specimen shape. The metallographic evaluation of the boundary layer reveals a strong dependency of fragmentation on the deformation rate and the boundary layer thickness. With the aid of a numerical simulation, an individual critical stretch could be determined at which fragmentation starts, and provide guidance for an optimal forging process design.Keywords
This publication has 17 references indexed in Scilit:
- Forging of eccentric co-extruded Al-Mg compounds and analysis of the interface strengthIOP Conference Series: Materials Science and Engineering, 2016
- Residual Stress State and Fracture Mechanical Properties of Al/Mg CompoundsMaterials Today: Proceedings, 2016
- Recent Developments for the Production of Al-Mg CompoundsMaterials Today: Proceedings, 2015
- Coextrusion of Mg–Al macro compositesJournal of Materials Processing Technology, 2012
- Manufacturing of Steel-Reinforced Aluminum Products by Combining Hot Extrusion and Closed-Die ForgingKey Engineering Materials, 2012
- Numerische und experimentelle Untersuchungen zur Herstellung von stranggepressten Aluminium/Magnesium-Werkstoffverbunden und zur Festigkeit des InterfaceMaterialwissenschaft und Werkstofftechnik, 2009
- The new BMW inline six-cylinder spark-ignition engineMTZ Worldwide, 2004
- Herstellung verbundverstärkter Aluminiumprofile für ultraleichte Tragwerke durch StrangpressenMaterialwissenschaft und Werkstofftechnik, 2004
- An Analytical Approach to the Problem of Core Fracture During Extrusion of Bimetal RodsJournal of Engineering for Industry, 1985
- The Effect of Receiver Pressure on the Observed Flow Pattern in the Hydrostatic Extrusion of Bimetal RodsJournal of Engineering for Industry, 1976