Study the effect of cooling medium on the torsion resistance and hardness of medium carbon steel
Open Access
- 26 September 2018
- conference paper
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 405 (1) , 012005
Abstract
In this paper, the effect of the cooling medium on the strength of torsion and hardness is discussed. The specimen used in this study is of medium carbon steel grade. The carbon percentage was determined as 0.55% C through the Arl spectroscopy instrument. The specimen dimension is 6 mm in diameter, gauge length is 76 mm and the total length is 144 mm. Different cooling mediums such as water, air, furnace atmosphere and oil were used to determine the effect of cooling speed on mechanical properties, specifically the torsion strength and hardness. In all treatments, the holding period was 30 minutes. From the results, cooling in the furnace atmosphere had the greatest impact on the resistance of the torsion of the carbon steel from other cooling methods. The non-heat-treated sample was the least resistant between the samples whereas the water-cooled sample had the highest in terms of their scratch resistance according to the results of the hardness device.Keywords
This publication has 10 references indexed in Scilit:
- Effect of surface hardness and roughness produced by turning on the torsion mechanical properties of annealed AISI 1020 steelRevista Facultad de Ingeniería Universidad de Antioquia, 2017
- Effect of Cooling Rate and Vanadium Content on the Microstructure and Hardness of Medium Carbon Forging SteelJournal of Materials Science & Technology, 2016
- The effect of heat treatment on the hardness and impact properties of medium carbon steelIOP Conference Series: Materials Science and Engineering, 2016
- Effect of Quenching Medium on Hardness of Carburized Low Carbon Steel for Manufacturing of Spindle Used in Spinning MillProcedia Engineering, 2015
- Influence of Heat Treatment on Mechanical Properties of Aisi1040 SteelIOSR Journal of Mechanical and Civil Engineering, 2013
- The effect of heat treatment on the mechanical properties of a low carbon steel (0.1%) for offshore structural applicationProceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2012
- Microstructure–hardness relationship in quenched and partitioned medium-carbon and high-carbon steels containing siliconMaterials Science and Engineering: A, 2008
- The effect of heat treatment on high temperature mechanical properties of microalloyed medium carbon steelMaterials & Design (1980-2015), 2006
- Effect of heat treatment on mechanical properties and fracture behaviour of a 12CrMoV steelMaterials Science and Engineering: A, 1990
- Influence of heat treatment on mechanical properties of 300M Steel1975