ELECTRIC FIELD OF SEMICONDUCTING SCREEN IN POWER CABLE WITH POLYMER INSULATION TAKING INTO ACCOUNT STRUCTURAL INHOMOGENEITIES
Authors:
- A.A. ShcherbaASA.A. Shcherba
- O.D. PodoltsevOPO.D. Podoltsev
- I.M. KucheriavaIKI.M. Kucheriava
Open Access
- 15 August 2024
- journal article
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Tekhnichna Elektrodynamika
- Vol. 2024 (5) , 3-11
Abstract
The non-homogeneous electric field distributions in the cross-linked polyethylene insulation of 330 kV power cable with multi-conductor core depending on the electrical conductivity and thickness of the semiconducting screen as well as at different frequency of applied voltage (from 50 to 104 Hz) are studied by finite-element analysis. As shown, taking into account the periodic structure of core surface, the electrical conductivity of the material of internal semiconducting screen should exceed 10–6 S/m and its thickness should be at least 1.5 mm in order to obtain the uniform electric field in the basic insulation of the cable at the boundary with the screen. The paper also considers the effect of various types of the surface and volumetric defects in the semiconducting screen on the electric field inhomogeneity in cable insulation. It is shown that the defects in the screen can lead to a significant increase of the electric field in the local zones of their location (up to 5 times as compared to the field without defects) and therefore contribute to the formation and development of treeing structures in the insulation. The revealed results explain the reasons for the micro- and macro-level degradation of power cable insulation and confirm the need to ensure the uniform structure, smooth surface of both semiconducting screen and core during the technological process of manufacturing the power cables with cross-linked polyethylene insulation. References 23, figures 8, table 1.Keywords
This publication has 12 references indexed in Scilit:
- Effect of temperature on electric‐thermal properties of semi‐conductive shielding layer and insulation layer for high‐voltage cableHigh Voltage, 2021
- Fillers for Polymer Applications2017
- THE TECHNOLOGICAL AND EXPLOITATIVE FACTORS OF LOCAL INCREASE OF ELECTRIC FIELD STRENGTH IN THE POWER CABLE OF COAXIAL DESIGNElectrical Engineering & Electromechanics, 2016
- Advances in high-field insulating polymeric materials over the past 50 yearsIEEE Electrical Insulation Magazine, 2013
- Influence of semicon shields on the dielectric loss of XLPE cables2009
- Severe degradation of the conductor screen of service and laboratory aged medium voltage XLPE insulated cablesIEEE Transactions on Dielectrics and Electrical Insulation, 2009
- Medium voltage cable defects revealed by off-line partial discharge testing at power frequencyIEEE Electrical Insulation Magazine, 2006
- High frequency properties of shielded power cable. Part 2: sources of error in measuring shield dielectric propertiesIEEE Electrical Insulation Magazine, 2006
- Electrical and thermal properties of semiconductive shield for 154 kV power cable2005
- Ageing mechanisms and diagnostics for power cables - an overviewIEEE Electrical Insulation Magazine, 2001