Unraveling the Morphology in Solution-Processed Pseudo-Bilayer Planar Heterojunction Organic Solar Cells
- 1 July 2019
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 11 (29) , 26213-26221
Abstract
The conventional bulk heterojunction (BHJ) structure is widely used for fabricating high performance organic solar cells (OSCs) due to the nanometer-scale phase separation of donor/acceptor component. However, the elaborate control of the BHJ morphology is difficult to be carried out because the morphology evolution is such a complicated process. The compatibility requirement of materials in same solvent restricts the structural diversity of molecules to some extent. Meanwhile, the nanoscopic interpenetrating donor/acceptor domains reduce the crystallinity of themselves. The bilayer planar heterojunction, by contrast, possesses of complementary advantages that can be an alternative candidate to achieve the device fabrication and produce different vertical stratification in heterojunction films. But the flat contact area limits the charge separation and transmission efficiency. The sequential solution processed approach was used to facilitate material diffusion in layers. Also, solvent additives were employed to further enhance the diffusion and thus the device performance. Nevertheless, the morphology of the formed pseudo-bilayer planar heterojunction (PPHJ) was not fully revealed yet. Here, we carefully study the morphology of the non-fullerene based PPHJ device in three dimensions. High hole mobility of 2.09 × 10-4 cm2 V-1 s-1 and electron mobility of 7.91 × 10-5 cm2 V-1 s-1 were obtained in the solution-processed PPHJ device. Meanwhile, a distinct phase separation size with vertical rearrangement of donor and acceptor were observed, which enable the pseudo-bilayer devices to equip with a comparable spectral response to BHJ devices. We demonstrate that a freak device architecture (ITO/ZnO/PBDB-T/ITIC/MoO3/Ag) with a PCE of 7% can be obtained from a larger molecular weight of PBDB-T without using extra additives. The solution-processed PPHJ films have much in common with the BHJ films. The results proposed that with appropriate molecular design and vertical phase separation optimization, the performance of solution processed PPHJ based OSCs can be further improved.Keywords
Funding Information
- National Natural Science Foundation of China (51833004)
- National Science Fund for Distinguished Young Scholars (51425304)
This publication has 41 references indexed in Scilit:
- Design and application of volatilizable solid additives in non-fullerene organic solar cellsNature Communications, 2018
- All‐Polymer Solar Cells: Recent Progress, Challenges, and ProspectsAngewandte Chemie International Edition, 2018
- Organic and solution-processed tandem solar cells with 17.3% efficiencyScience, 2018
- Design rules for minimizing voltage losses in high-efficiency organic solar cellsNature Materials, 2018
- Hole‐Transfer Dependence on Blend Morphology and Energy Level Alignment in Polymer: ITIC Photovoltaic MaterialsAdvanced Materials, 2017
- Morphology Development in Solution-Processed Functional Organic Blend Films: An In Situ ViewpointChemical Reviews, 2017
- Conjugated‐Polymer Blends for Organic Photovoltaics: Rational Control of Vertical Stratification for High PerformanceAdvanced Materials, 2017
- Single-junction polymer solar cells with high efficiency and photovoltageNature Photonics, 2015
- Universal Formation of Compositionally Graded Bulk Heterojunction for Efficiency Enhancement in Organic PhotovoltaicsAdvanced Materials, 2014
- Solvent‐Induced Morphology in Polymer‐Based Systems for Organic PhotovoltaicsAdvanced Functional Materials, 2011