Proposition of a modified formulation to predict the lateral-torsional buckling resistance of steel beams: meta-analysis of test data
Open Access
- 1 January 2024
- journal article
- review article
- Published by FapUNIFESP (SciELO) in REM - International Engineering Journal
- Vol. 77 (4) , e230134
Abstract
Lateral-Torsional Buckling (LTB) is an important limit state that must be considered in the design of steel members subjected to bending. During the process of revising of the Brazilian Standard ABNT NBR 8800:2008, it was questioned whether the present formulation would really lead to good results vis-à-vis the experimental tests. To this end, a comprehensive review of the technical literature was carried out, looking for test results that could be compared with the ones using the equations provided in the Brazilian Standard. Then, a meta-analysis was performed by comparing the test results with the ones of the ABNT NBR 8800:2008 methodology. It was observed that, for beams subjected to uniform bending moments and simple supports, the formulation proved to be adequate. However, for the case of beams with variable bending moments, for which the factor Cb (modification factor for non-uniform bending moment diagram) is used, it was realized that the formulation could lead to unsafe results, especially for high values of Cb. A modified formulation was then proposed, with the introduction of Cb only in the elastic range of the equations (only in the buckling moment equation) and in the equation for the slenderness parameter corresponding to the beginning of yielding, λΓ. The proposed modified formulation, as well as the EN 1993-1-1:2022 methodology, were subsequently included in the meta-analysis. Structural reliability analyses were also carried out for both the ABNT NBR 8800:2008 and the modified methodologies. The analyses showed that the reliability indexes of the modified formulation were higher than those of the ABNT NBR 8800:2008 one and closer to the recommended "target value".Keywords
This publication has 11 references indexed in Scilit:
- Probabilistic models for live loads in buildings: critical review, comparison to Brazilian design standards and calibration of partial safety factorsRevista IBRACON de Estruturas e Materiais, 2023
- Reliability-based calibration of Brazilian structural design codes used in the design of concrete structuresRevista IBRACON de Estruturas e Materiais, 2019
- Experimental and numerical studies on lateral torsional buckling of welded Q460GJ structural steel beamsEngineering Structures, 2016
- Partially braced inelastic beam buckling experimentsJournal of Constructional Steel Research, 1987
- EFFECTS OF MOMENT DISTRIBUTION ON LATERAL-TORSIONAL BUCKLING STRENGTH OF ROLLED STEEL I-BEAMSDoboku Gakkai Ronbunshu, 1986
- Inelastic beam buckling experimentsJournal of Constructional Steel Research, 1983
- Statistical Study of Experiments on Welded BeamsJournal of the Structural Division, 1981
- Strength Variation of Laterally Unsupported BeamsJournal of the Structural Division, 1980
- Inelastic Buckling of Simply Supported Steel I-BeamsJournal of the Structural Division, 1975
- LATERAL TORSIONAL BUCKLING OF I-SECTIONS IN GRADE 55 STEEL.Proceedings of the Institution of Civil Engineers, 1969