Structure and properties of V90Cо10 membrane alloy
- 1 January 2017
- conference paper
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 1885, 020020
Abstract
Alloys based on vanadium having bcc structure are considered as an alternative to palladium membrane alloys for hydrogen filtering. The membrane alloy (V90Co10) was studied by X-ray photoelectron spectroscopy, scanning electron and confocal microscopy. Gaseous impurities (oxygen, nitrogen, carbon, and hydrogen) in the membrane alloy was measured. The surface preparation method for the membrane alloy was developed, this makes possible to reduce roughness (Ra) down to 0.05 µm. It was established that in subsurface layer (∼10 nm) vanadium is in metallic form as well as 4+ and 2+ oxidation levels; while cobalt has only metallic form. Homogeneous distribution of elements in the bulk alloy was proved by chemical microanalysis. The value of hydrogen permeability of the V90Co10 membrane alloy was measured by non-stationary technique within the temperature and pressure ranges (623–723 К and 9–30 kPa, respectively). It was found that the hydrogen permeability of the V90Co10 membrane alloy is comparable with membranes made of metallic palladium.This publication has 19 references indexed in Scilit:
- Effect of alloying elements (Al, Co, Fe, Ni) on the solubility of hydrogen in vanadium: A thermodynamic calculationInternational Journal of Hydrogen Energy, 2012
- Non-Pd BCC alloy membranes for industrial hydrogen separationJournal of Membrane Science, 2010
- Application of Extended Permeability to a Thick Palladium MembraneAdvanced Materials Research, 2010
- Development of membranes for hydrogen separation: Pd coated V–10PdEnergy Materials, 2008
- Potential importance of hydrogen as a future solution to environmental and transportation problemsInternational Journal of Hydrogen Energy, 2008
- Developments and Design of Novel (Non-Palladium-Based) Metal Membranes for Hydrogen SeparationIndustrial & Engineering Chemistry Research, 2006
- Hydrogen Membrane Separation TechniquesIndustrial & Engineering Chemistry Research, 2006
- Hydrogen permeation characteristics of vanadium–aluminium alloysScripta Materialia, 2002
- Alloying effects on the hydriding properties of vanadium at low hydrogen pressuresJournal of Alloys and Compounds, 2002
- Electromembrane Processes2001