Enhancement-Mode Ambipolar Thin-Film Transistors and CMOS Logic Circuits using Bilayer Ga2O3/NiO Semiconductors
Open Access
- 26 January 2024
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (5) , 6088-6097
Abstract
Recent advancements in power electronics have been driven by Ga2O3-based ultrawide bandgap (UWBG) semiconductor devices, enabling efficient high-current switching. However, integrating Ga2O3 power devices with essential silicon CMOS logic circuits for advanced control poses fabrication challenges. Researchers have introduced Ga2O3-based NMOS and pseudo-CMOS circuits for integration, but these circuits may either consume more power or increase the design complexity. Hence, this article proposes Ga2O3-based CMOS realized using heterogeneous 3D-stacked bilayer ambipolar transistors. These ambipolar transistors consist of HfO2/NiO/Ga2O3/NiO/HfO2 heterostructures that are wrapped around by the Ti/Au gate electrode, resulting in record high electron and hole current on/off ratios of 109 and 107. The threshold voltage, subthreshold swing, and current density measured from 100 ambipolar devices (across 5 batches) are around -7.99 ± 0.92 V (p-channel) and 7.81 ± 0.81 V (n-channel), 0.59 ± 0.07 V/dec (p-channel) and 0.61 ± 0.06 V/dec (n-channel), and 0.99 ± 0.26 mA/mm (p-channel) and 58.23 ± 12.99 mA/mm (n-channel), respectively. All the 100 ambipolar devices showed decent long-term stability over a period of 200 days, exhibiting reliable electrical performance. The threshold voltage shift (ΔVTH) after negative bias stressing for a period of 3500 s is around 11.52 V (p-channel) and 10.21 V (n-channel), respectively. Notably, the n-channels exhibit ∼2 orders higher on/off ratio than the best Ga2O3 unipolar transistors at 300 °C. Moreover, the polarities of ambipolar transistors are reconfigurable into p- or n-MOS, which are integrated to demonstrate CMOS inverter, NOR, and NAND logic gates. The switching periods from "0" to "1" and from "1" to "0" of NOR are 0.12 and 0.17 μs, and those of NAND are 0.16 and 0.13 μs. This work lays the foundation of oxide-semiconductor-based CMOS for future integrated electronics.Keywords
Funding Information
- King Abdullah University of Science and Technology (BAS/1/1664-01-01, REI/1/5124-01-01, REI/1/4999-01-01)
This publication has 50 references indexed in Scilit:
- Inkjet printed ambipolar transistors and inverters based on carbon nanotube/zinc tin oxide heterostructuresApplied Physics Letters, 2014
- Depletion-mode Ga2O3 metal-oxide-semiconductor field-effect transistors on β-Ga2O3 (010) substrates and temperature dependence of their device characteristicsApplied Physics Letters, 2013
- Ambipolar SnO Thin-Film Transistors and InvertersECS Transactions, 2013
- Recyclable, Flexible, Low‐Power Oxide ElectronicsAdvanced Functional Materials, 2012
- Ambipolar inverters using SnO thin-film transistors with balanced electron and hole mobilitiesApplied Physics Letters, 2012
- Ambipolar Oxide Thin‐Film TransistorAdvanced Materials, 2011
- Bilayer Ambipolar Organic Thin-Film Transistors and Inverters Prepared by the Contact-Film-Transfer MethodACS Applied Materials & Interfaces, 2009
- Solution‐Deposited Zinc Oxide and Zinc Oxide/Pentacene Bilayer Transistors: High Mobility n‐Channel, Ambipolar, and Nonvolatile DevicesAdvanced Functional Materials, 2008
- Electron and Ambipolar Transport in Organic Field-Effect TransistorsChemical Reviews, 2007
- Ambipolar organic field-effect transistors with air stability, high mobility, and balanced transportApplied Physics Letters, 2006