Preliminary Results of Heat Transfer and Pressure Drop Measurements on Al2O3/H2O Nanofluids through a Lattice Channel
Open Access
Abstract
A nanofluid is composed of a base fluid with a suspension of nanoparticles that improve the base fluid’s thermophysical properties. In this work, the authors have conducted experimental tests on an alumina-based nanofluid (Al2O3/H2O) moving inside a 3D-printed lattice channel. The unit cell’s lattice shape can be considered a double X or a double pyramidal truss with a common vertex. The test channel is 80 mm long and has a cross-sectional area, without an internal lattice with that has the dimensions H × W, with H = 5 mm and W = 15 mm. A nanofluid and a lattice duct can represent a good compound technique for enhancing heat transfer. The channel is heated by an electrical resistance wound onto its outer surface. The heat transfer rate absorbed by the nanofluid, the convective heat transfer coefficients, and the pressure drops are evaluated. The experimental tests are carried out at various volumetric contents of nanoparticles (φ = 1.00%, φ = 1.50% and φ = 2.05%) and at various volumetric flow rates (from 0.2 L/min to 2 L/min). The preliminary results show that in the range between 0.5 L/min ÷ 2.0 L/min, the values of convective heat transfer coefficients are greater than those of pure water (φ = 0) for all concentrations of Al2O3; thus, the nanofluid absorbed a higher thermal power than the water, with an average increase of 6%, 9%, and 14% for 1.00%, 1.50% and 2.05% volume concentrations, respectively. The pressure drops are not very different from those of water; therefore, the use of nanofluids also increased the cooling efficiency of the system.Keywords
This publication has 30 references indexed in Scilit:
- Heat transfer and fluid flow characteristics in microchannels heat exchanger using nanofluids: A reviewRenewable and Sustainable Energy Reviews, 2011
- Empirical correlating equations for predicting the effective thermal conductivity and dynamic viscosity of nanofluidsEnergy Conversion and Management, 2011
- Ultralight X-type lattice sandwich structure (I): Concept, fabrication and experimental characterizationScience China Technological Sciences, 2009
- Critical review of heat transfer characteristics of nanofluidsRenewable and Sustainable Energy Reviews, 2007
- Transitional Heat Transfer in Plain Horizontal TubesHeat Transfer Engineering, 2006
- Multifunctional periodic cellular metalsPhilosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 2005
- Convective heat dissipation with lattice-frame materialsMechanics of Materials, 2004
- Fluid-flow and endwall heat-transfer characteristics of an ultralight lattice-frame materialInternational Journal of Heat and Mass Transfer, 2004
- Measuring Thermal Conductivity of Fluids Containing Oxide NanoparticlesJournal of Heat Transfer, 1999
- Describing the uncertainties in experimental resultsExperimental Thermal and Fluid Science, 1988