Design and Multiobjective Optimization of a New Flux-Concentrating Rotor Combining Halbach PM Array and Spoke-Type IPM Machine
- 18 August 2022
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ASME Transactions on Mechatronics
- Vol. 28 (1) , 257-266
Abstract
In this article, a new spoke-type interior permanent magnet (PM) with a flux-concentrating rotor is proposed. Based on the flux-concentrating principle, the fitting parameters between PMs and magnetic cores on the rotor make a significant impact on the flux concentration and saliency effect, thus resulting in the output torque and power capacity. Therefore, taking the average torque, cogging torque, peak power, and PM utilization as the optimization objectives, first, the sensitivity analysis is carried out that includes the different geometric variables of the rotor. Afterward, the response surface model based on the Box–Behnken method is established by selecting the reasonable optimization variables. Then, the optimal solution of the design parameters is verified by solving the response surface model. Meanwhile, a set of Pareto solutions is generated by adopting a multiobjective genetic algorithm. By two-dimensional finite-element analysis, the electromagnetic performance of a 72-slot/16-pole topology with the optimized flux-concentrating rotor is analyzed and compared with that of the initial design model. The results are demonstrated based on the response surface model. The effectiveness of the multiobjective optimization design method and multiobjective genetic algorithm is confirmed for the flux-concentrating rotor. Finally, a 30-kW prototype is developed and experimented with to verify the finite-element analysis results as well as the effectiveness of multiobjective optimization.Keywords
Funding Information
- Jiangsu Provincial Key Research and Development Project (BE2021016-1)
- Natural Science Foundation of Jiangsu Province (BK20220957)
This publication has 32 references indexed in Scilit:
- 3-D Performance Analysis and Multiobjective Optimization of Coreless-Type PM Linear Synchronous MotorsIEEE Transactions on Industrial Electronics, 2017
- Sensitivity Analysis and Optimal Design of a Dual Mechanical Port Bidirectional Flux-Modulated MachineIEEE Transactions on Industrial Electronics, 2017
- Multi-Objective Optimal Design of a Toroidally Wound Radial-Flux Halbach Permanent Magnet Array Limited Angle Torque MotorIEEE Transactions on Industrial Electronics, 2016
- No-Load Analysis of PMLSM With Halbach Array and PM Overhang Based on Three-Dimensional Analytical MethodIEEE Transactions on Applied Superconductivity, 2016
- Multiobjective Optimization Design of Small-Scale Wind Power Generator With Outer Rotor Based on Box–Behnken DesignIEEE Transactions on Applied Superconductivity, 2016
- Development of a 20-Pole–24-Slot SPMSM With Consequent Pole Rotor for In-Wheel Direct DriveIEEE Transactions on Industrial Electronics, 2015
- Comparative Study of Interior Permanent Magnet, Induction, and Switched Reluctance Motor Drives for EV and HEV ApplicationsIEEE Transactions on Transportation Electrification, 2015
- Techniques for Multilevel Design Optimization of Permanent Magnet MotorsIEEE Transactions on Energy Conversion, 2015
- Multiobjective Optimization of Switched Reluctance Motors Based on Design of Experiments and Particle Swarm OptimizationIEEE Transactions on Energy Conversion, 2015
- Internal Permanent Magnet Motor Design for Electric Vehicle DriveIEEE Transactions on Industrial Electronics, 2009