Jing Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jing Wang has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Weiwei Geng
School of Automation, Nanjing University of Science and Technology, Nanjing, China
7 shared publications - Zhuoran Zhang
Nanjing University of Aeronautics and Astronautics
4 shared publications Jian Guo
Nanjing University of Science and Technology, Nanjing, China
3 shared publications- Jian Guo
Nanjing University of Science and Technology
3 shared publications Lei Li
Nanjing University of Science and Technology, Nanjing, China
3 shared publicationsQiang Li
School of Automation, Nanjing University of Science and Technology, Nanjing, China
3 shared publications
Latest Publications
- 24 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 11 (2) , 5569-5577
Design and Performance Analysis of a Novel Axial-Flux IPM Machine for Electric Vehicles
To solve the problems of poor flux-weakening ability and insufficient utilization of reluctance torque for the axial-flux surface-mounted permanent magnet (AFSPM) motor, a new type of axial-flux interior permanent magnet (AFIPM) rotor topology is proposed in this article. Firstly, the electromagnetic topology of the proposed axial flux motor with an IPM rotor is introduced. The working principle of the proposed IPM rotor is analyzed by the magnetic circuit. And preliminarily designed for the electric vehicle traction application. Then, considering the calculation time consumption of multi-objective optimization with three-dimensional (3-D) finite element analysis, a two-dimensional (2-D) equivalent model is developed to optimize the geometric parameters of the AFIPM rotor. Furthermore, electromagnetic performances are compared with the state-of-the-art AFSPM and single U-shaped designs to highlight the advantages of the presented novel AFIPM machine in power/torque density and flux-weakening capability. The torque capacity of the new AFIPM motor is improved by utilizing reluctance torque, while the high saliency ratio enhances the constant power speed range. Finally, the proposed AFIPM motor is manufactured and experimented. The experimental results further confirm the correctness of three-dimensional finite element analysis calculation and equivalent optimization results with a 2-D model. Meanwhile, the advantages of the new AFIPM rotor for high utilization of reluctance torque and high torque/power density are also demonstrated.
- 24 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 11 (2) , 5569-5577
Design and Performance Analysis of a Novel Axial-Flux IPM Machine for Electric Vehicles
To solve the problems of poor flux-weakening ability and insufficient utilization of reluctance torque for the axial-flux surface-mounted permanent magnet (AFSPM) motor, a new type of axial-flux interior permanent magnet (AFIPM) rotor topology is proposed in this article. Firstly, the electromagnetic topology of the proposed axial flux motor with an IPM rotor is introduced. The working principle of the proposed IPM rotor is analyzed by the magnetic circuit. And preliminarily designed for the electric vehicle traction application. Then, considering the calculation time consumption of multi-objective optimization with three-dimensional (3-D) finite element analysis, a two-dimensional (2-D) equivalent model is developed to optimize the geometric parameters of the AFIPM rotor. Furthermore, electromagnetic performances are compared with the state-of-the-art AFSPM and single U-shaped designs to highlight the advantages of the presented novel AFIPM machine in power/torque density and flux-weakening capability. The torque capacity of the new AFIPM motor is improved by utilizing reluctance torque, while the high saliency ratio enhances the constant power speed range. Finally, the proposed AFIPM motor is manufactured and experimented. The experimental results further confirm the correctness of three-dimensional finite element analysis calculation and equivalent optimization results with a 2-D model. Meanwhile, the advantages of the new AFIPM rotor for high utilization of reluctance torque and high torque/power density are also demonstrated.
- 30 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 10 (3) , 4941-4950
Analysis and Optimization of Winding Losses of Axial Flux Permanent Magnet Machine With Concentrated Winding Flat Wires
Yokeless and Segmented Armature (YASA) axial flux permanent magnet (AFPM) motors have been found as the highest power density candidate for various axial flux topologies, especially with concentrated winding flat wires. However, this winding configuration produces AC losses that limit efficiency gains. This article primarily discusses the AC eddy current losses calculation of flat wire armature winding and efficiency optimization by matching a perfect tradeoff of AC and DC winding losses by selecting cross profile specifications of flat wire, as well as the axial size of coils distance from the air-gap side. A hybrid analytical– finite element analysis (FEA) method for rapidly calculating eddy current losses of the rectangular cross-section wires is induced and applied for the YASA AFPM motor based on the tangential and axial flux leakage distribution in slots. The specification of flat wire directly affects the AC and DC losses of the windings. Certainly, the axial position of the coil affecting the eddy current loss is also considered. According to the study, two winding structures that can effectively reduce eddy current losses are acquired and the results are also verified. The calculation of winding losses and optimization of flat wire specifications are implemented and validated on the studied 12-slot 10-pole YASA AFPM motor, rated at 35 kW, with open slots by measuring efficiency. Meanwhile, the accuracy of 3-D FEA is further verified.
- 30 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 10 (3) , 4941-4950
Analysis and Optimization of Winding Losses of Axial Flux Permanent Magnet Machine With Concentrated Winding Flat Wires
Yokeless and Segmented Armature (YASA) axial flux permanent magnet (AFPM) motors have been found as the highest power density candidate for various axial flux topologies, especially with concentrated winding flat wires. However, this winding configuration produces AC losses that limit efficiency gains. This article primarily discusses the AC eddy current losses calculation of flat wire armature winding and efficiency optimization by matching a perfect tradeoff of AC and DC winding losses by selecting cross profile specifications of flat wire, as well as the axial size of coils distance from the air-gap side. A hybrid analytical– finite element analysis (FEA) method for rapidly calculating eddy current losses of the rectangular cross-section wires is induced and applied for the YASA AFPM motor based on the tangential and axial flux leakage distribution in slots. The specification of flat wire directly affects the AC and DC losses of the windings. Certainly, the axial position of the coil affecting the eddy current loss is also considered. According to the study, two winding structures that can effectively reduce eddy current losses are acquired and the results are also verified. The calculation of winding losses and optimization of flat wire specifications are implemented and validated on the studied 12-slot 10-pole YASA AFPM motor, rated at 35 kW, with open slots by measuring efficiency. Meanwhile, the accuracy of 3-D FEA is further verified.
- 18 August 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ASME Transactions on Mechatronics
- Vol. 28 (1) , 257-266
Design and Multiobjective Optimization of a New Flux-Concentrating Rotor Combining Halbach PM Array and Spoke-Type IPM Machine
In this article, a new spoke-type interior permanent magnet (PM) with a flux-concentrating rotor is proposed. Based on the flux-concentrating principle, the fitting parameters between PMs and magnetic cores on the rotor make a significant impact on the flux concentration and saliency effect, thus resulting in the output torque and power capacity. Therefore, taking the average torque, cogging torque, peak power, and PM utilization as the optimization objectives, first, the sensitivity analysis is carried out that includes the different geometric variables of the rotor. Afterward, the response surface model based on the Box–Behnken method is established by selecting the reasonable optimization variables. Then, the optimal solution of the design parameters is verified by solving the response surface model. Meanwhile, a set of Pareto solutions is generated by adopting a multiobjective genetic algorithm. By two-dimensional finite-element analysis, the electromagnetic performance of a 72-slot/16-pole topology with the optimized flux-concentrating rotor is analyzed and compared with that of the initial design model. The results are demonstrated based on the response surface model. The effectiveness of the multiobjective optimization design method and multiobjective genetic algorithm is confirmed for the flux-concentrating rotor. Finally, a 30-kW prototype is developed and experimented with to verify the finite-element analysis results as well as the effectiveness of multiobjective optimization.
- 18 August 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ASME Transactions on Mechatronics
- Vol. 28 (1) , 257-266
Design and Multiobjective Optimization of a New Flux-Concentrating Rotor Combining Halbach PM Array and Spoke-Type IPM Machine
In this article, a new spoke-type interior permanent magnet (PM) with a flux-concentrating rotor is proposed. Based on the flux-concentrating principle, the fitting parameters between PMs and magnetic cores on the rotor make a significant impact on the flux concentration and saliency effect, thus resulting in the output torque and power capacity. Therefore, taking the average torque, cogging torque, peak power, and PM utilization as the optimization objectives, first, the sensitivity analysis is carried out that includes the different geometric variables of the rotor. Afterward, the response surface model based on the Box–Behnken method is established by selecting the reasonable optimization variables. Then, the optimal solution of the design parameters is verified by solving the response surface model. Meanwhile, a set of Pareto solutions is generated by adopting a multiobjective genetic algorithm. By two-dimensional finite-element analysis, the electromagnetic performance of a 72-slot/16-pole topology with the optimized flux-concentrating rotor is analyzed and compared with that of the initial design model. The results are demonstrated based on the response surface model. The effectiveness of the multiobjective optimization design method and multiobjective genetic algorithm is confirmed for the flux-concentrating rotor. Finally, a 30-kW prototype is developed and experimented with to verify the finite-element analysis results as well as the effectiveness of multiobjective optimization.
- 21 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 70 (5) , 4450-4460
Design and Performance Comparison of Novel Flux-Concentrating IPM Machines for Power Generation System Application of Extended-Range Electric Vehicle
A new spoke-type interior permanent magnet (IPM) machine with enhanced flux-concentrating capability and high saliency ratio rotor is proposed for the extended-range electric vehicles traction applications. The evolution of the proposed flux-concentrating rotor structure from the spoke-type IPM rotor is illustrated to achieve a higher saliency ratio and higher air-gap flux density. Two IPM motors with the same magnets volume are developed and compared with the proposed IPM machine. The rotor configurations are optimized by the multiobjective genetic algorithm to maximize the torque/power and minimize the cogging torque, as well as increasing the saliency ratio. Furthermore, the major electromagnetic performance of the three machines are analyzed and compared by the finite-element analysis (FEA), including the air-gap flux density, cogging torque, saliency ratio, torque-current curves, and field-weakening capability. The results show that the IPM machine with high saliency ratio rotor can achieve higher torque/power, maximum torque per ampere capability, and flux-weakening ability. Finally, a-rated 60-kW PM motor with the proposed rotor is manufactured and experimented to verify the results of the FEA.
- 21 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 70 (5) , 4450-4460
Design and Performance Comparison of Novel Flux-Concentrating IPM Machines for Power Generation System Application of Extended-Range Electric Vehicle
A new spoke-type interior permanent magnet (IPM) machine with enhanced flux-concentrating capability and high saliency ratio rotor is proposed for the extended-range electric vehicles traction applications. The evolution of the proposed flux-concentrating rotor structure from the spoke-type IPM rotor is illustrated to achieve a higher saliency ratio and higher air-gap flux density. Two IPM motors with the same magnets volume are developed and compared with the proposed IPM machine. The rotor configurations are optimized by the multiobjective genetic algorithm to maximize the torque/power and minimize the cogging torque, as well as increasing the saliency ratio. Furthermore, the major electromagnetic performance of the three machines are analyzed and compared by the finite-element analysis (FEA), including the air-gap flux density, cogging torque, saliency ratio, torque-current curves, and field-weakening capability. The results show that the IPM machine with high saliency ratio rotor can achieve higher torque/power, maximum torque per ampere capability, and flux-weakening ability. Finally, a-rated 60-kW PM motor with the proposed rotor is manufactured and experimented to verify the results of the FEA.
- 23 February 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 70 (1) , 155-166
Comparative Study of Yokeless Stator Axial-Flux PM Machines Having Fractional Slot Concentrated and Integral Slot Distributed Windings for Electric Vehicle Traction Applications
Due to the high-power density and compact structure, axial-flux permanent magnet (AFPM) machines have gradually received much attention with a view to researching breakthroughs in the next generation electric drive technology for electric vehicles in the recent decades. The AFPM machines with factional slot concentrated winding (FSCW) and yokeless stator, namely yokeless, and segmented armature (YASA) motors, have drawn much attention for its high-power density and potential manufacturability due to the concentrated winding and modular stator core configuration. However, the significant rotor loss resulting from the abundant armature reaction harmonics in FSCW machines imposes a great challenge to the rotor heat dissipation, especially when the pursuit of higher speed has become the trend for electric vehicle applications. On the other hand, distributed winding is widely used in high speed radial flux permanent magnet (PM) machines due to its low armature reaction harmonics. In order to figure out the advantages and disadvantages of various winding arrangement and rotor configuration of AFPM for electric vehicle applications, the comparative study of four AFPM machines with various winding configurations and rotor PM arrangements are comprehensively conducted in this article. First, the design and primary optimization of the four AFPM machines are conducted for the electric vehicle requirement specifications. Then, a comprehensive three-dimensional finite-element analysis (FEA) is employed to compare the electromagnetic performance including torque/power density, efficiency, and flux-weakening capacity. Furthermore, the guideline of winding selection of AFPM machines for electrical vehicle is given. Finally, a yokeless stator AFPM prototype with ISDW configuration is manufactured and tested to verify the validity of the FEA results, as well as confirm the comparison conclusion.
- 23 February 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 70 (1) , 155-166
Comparative Study of Yokeless Stator Axial-Flux PM Machines Having Fractional Slot Concentrated and Integral Slot Distributed Windings for Electric Vehicle Traction Applications
Due to the high-power density and compact structure, axial-flux permanent magnet (AFPM) machines have gradually received much attention with a view to researching breakthroughs in the next generation electric drive technology for electric vehicles in the recent decades. The AFPM machines with factional slot concentrated winding (FSCW) and yokeless stator, namely yokeless, and segmented armature (YASA) motors, have drawn much attention for its high-power density and potential manufacturability due to the concentrated winding and modular stator core configuration. However, the significant rotor loss resulting from the abundant armature reaction harmonics in FSCW machines imposes a great challenge to the rotor heat dissipation, especially when the pursuit of higher speed has become the trend for electric vehicle applications. On the other hand, distributed winding is widely used in high speed radial flux permanent magnet (PM) machines due to its low armature reaction harmonics. In order to figure out the advantages and disadvantages of various winding arrangement and rotor configuration of AFPM for electric vehicle applications, the comparative study of four AFPM machines with various winding configurations and rotor PM arrangements are comprehensively conducted in this article. First, the design and primary optimization of the four AFPM machines are conducted for the electric vehicle requirement specifications. Then, a comprehensive three-dimensional finite-element analysis (FEA) is employed to compare the electromagnetic performance including torque/power density, efficiency, and flux-weakening capacity. Furthermore, the guideline of winding selection of AFPM machines for electrical vehicle is given. Finally, a yokeless stator AFPM prototype with ISDW configuration is manufactured and tested to verify the validity of the FEA results, as well as confirm the comparison conclusion.
- 31 January 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 58 (8) , 1-6
A Novel Spoke-Type IPM Rotor With Hybrid Radial and Axial Flux Concentration for Reduction of Interpolar Leakage Flux
Axial leakage magnetic flux is generated in the spoke-type interior permanent magnet synchronous motor (IPMSM) because of the flux-concentrating rotor structure, which degrades the performance of the motor. In this article, a traditional spoke-type interior permanent magnet (IPM) motor is fabricated and tested first. Then a novel spoke-type IPM rotor with hybrid radial and axial flux-concentrating capability is proposed to reduce the interpolar leakage flux and improve the torque performance. Furthermore, the radially magnetized PMs are installed in the inner circumference of the rotor, which can reduce the rotor-interior flux leakage. Finally, the superiority of the two proposed structures is verified through three-dimensional finite-element analysis (3-D FEA).
- 31 January 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 58 (8) , 1-6
A Novel Spoke-Type IPM Rotor With Hybrid Radial and Axial Flux Concentration for Reduction of Interpolar Leakage Flux
Axial leakage magnetic flux is generated in the spoke-type interior permanent magnet synchronous motor (IPMSM) because of the flux-concentrating rotor structure, which degrades the performance of the motor. In this article, a traditional spoke-type interior permanent magnet (IPM) motor is fabricated and tested first. Then a novel spoke-type IPM rotor with hybrid radial and axial flux-concentrating capability is proposed to reduce the interpolar leakage flux and improve the torque performance. Furthermore, the radially magnetized PMs are installed in the inner circumference of the rotor, which can reduce the rotor-interior flux leakage. Finally, the superiority of the two proposed structures is verified through three-dimensional finite-element analysis (3-D FEA).
- 6 October 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 69 (11) , 10882-10892
A New Flux-Concentrating Rotor of Permanent Magnet Motor for Electric Vehicle Application
This article presents a new interior permanent magnet (IPM) rotor structure/ assembly, which inherits from the Halbach magnet configuration and spoke-type IPM rotor to achieve a high saliency ratio and high torque/ power density. With this rotor structure, the torque density and power density are improved obviously, while the rotor inner diameter can be maximized to reduce core material and increases internal space in the rotor. Accordingly, the electromagnetic performance of three motors consists of a unified stator but different rotors, namely flux-concentrating rotor, Halbach array permanent magnet (PM) rotor and spoke-type IPM rotor is compared by finite element analysis. Nevertheless, due to the segmented structure of flux-concentrating PM rotor without magnetic bridges, the mechanical challenges are analyzed in detail for electric vehicle application to hold the pole pieces validate the structural feasibility at 7200 r/min. Finally, a 72-slot/ 16-pole fractional-slot PM motor with new flux-concentrating rotor is manufactured and tested to verify its performance and feasibility. It can be concluded that the new rotor is superior to the spoke-type IPM and Halbach array PM rotor in terms of torque density and PM utilization.
- 6 October 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 69 (11) , 10882-10892
A New Flux-Concentrating Rotor of Permanent Magnet Motor for Electric Vehicle Application
This article presents a new interior permanent magnet (IPM) rotor structure/ assembly, which inherits from the Halbach magnet configuration and spoke-type IPM rotor to achieve a high saliency ratio and high torque/ power density. With this rotor structure, the torque density and power density are improved obviously, while the rotor inner diameter can be maximized to reduce core material and increases internal space in the rotor. Accordingly, the electromagnetic performance of three motors consists of a unified stator but different rotors, namely flux-concentrating rotor, Halbach array permanent magnet (PM) rotor and spoke-type IPM rotor is compared by finite element analysis. Nevertheless, due to the segmented structure of flux-concentrating PM rotor without magnetic bridges, the mechanical challenges are analyzed in detail for electric vehicle application to hold the pole pieces validate the structural feasibility at 7200 r/min. Finally, a 72-slot/ 16-pole fractional-slot PM motor with new flux-concentrating rotor is manufactured and tested to verify its performance and feasibility. It can be concluded that the new rotor is superior to the spoke-type IPM and Halbach array PM rotor in terms of torque density and PM utilization.
- 26 May 2015
- Published by Wiley in International Journal of Satellite Communications and Networking
- Vol. 34 (2) , 251-261
A cyclic redundancy check-based non-coherent receiver for automatic identification system signals
- 26 May 2015
- Published by Wiley in International Journal of Satellite Communications and Networking
- Vol. 34 (2) , 251-261
A cyclic redundancy check-based non-coherent receiver for automatic identification system signals