Thickness determination of surface oxides on metal powder by AES depth profiling
- 1 June 1992
- journal article
- research article
- Published by Wiley in Surface and Interface Analysis
- Vol. 19 (1-12) , 71-76
Abstract
A method for thickness determination of overlayers on irregularly shaped samples is established using AES depth profiling and stereophotogrammetry. The analysis is performed on a small selected area assumed to be flat. The angle of ion incidence on the area, given by the scalar product of the ion beam vector and the normal to the surface, is obtained by determining the normal using a sterological method based on rotation of a titled sample. The variation in etch rate with the angle of ion incidence is determined for various oxides on flat samples. Application studies show that the angle of ion incidence on gas‐atomized metal particles can be determined from their spherical shape; the variation in etch rate is found to agree well with that calibrated on flat surfaces. It is also demonstrated how the presented method can be used when determining the oxide thickness in different areas on highly irregular water‐atomized metal particles.Keywords
This publication has 12 references indexed in Scilit:
- Surface studies of powder metallurgical stainless steelSurface and Interface Analysis, 1992
- Surface product formation during water atomization and sintering of austenitic stainless steel powderMetal Powder Report, 1990
- Thickness determination of oxide layers on spherically‐shaped metal powders by ESCASurface and Interface Analysis, 1988
- Influence of ion energy, incidence angle and surface roughness on depth resolution in AES sputter profiling of multilayer Cr/Ni thin filmsNuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 1986
- Characterization of a high depth‐resolution tantalum pentoxide sputter profiling reference materialSurface and Interface Analysis, 1983
- Depth resolution in composition profiles by ion sputtering and surface analysis for single-layer and multilayer structures on real substratesThin Solid Films, 1981
- Quantitative depth profiling in surface analysis: A reviewSurface and Interface Analysis, 1980
- Thickness measurements on layered materials in powder form by means of XPS and ion sputteringSurface and Interface Analysis, 1979
- Untersuchungen zur Festkörperzerstäubung bei schiefwinkligem Ionenbeschuß polykristalliner Metalloberflächen im Energiebereich um 1 keVThe European Physical Journal A, 1973
- Theory of Sputtering. I. Sputtering Yield of Amorphous and Polycrystalline TargetsPhysical Review B, 1969