Feasibility study of palm oil boiler ash (POBA) as a partial replacement of sand in foamed concrete
Authors:
- Mohamed Khatif Tawaf Mohamed YusofMYMohamed Khatif Tawaf Mohamed Yusof
- Siti Shahidah SharipudinSSSiti Shahidah Sharipudin
- Shahrul Nizam MohammadSMShahrul Nizam Mohammad
- Azmi RoslanARAzmi Roslan
- Zeno MichaelZMZeno Michael
- Ilya Izyan Shahrul AzharIAIlya Izyan Shahrul Azhar
- Nurrul Amilin Zainal AbidinNANurrul Amilin Zainal Abidin
Open Access
- 24 February 2022
- journal article
- research article
- Published by Warsaw University of Life Sciences - SGGW Press in Scientific Review Engineering and Environmental Sciences (SREES)
- Vol. 31 (1) , 3-13
Abstract
A study was conducted to explore the effect of palm oil boiler ash (POBA) on foamed concrete by varying the percentage of POBA over sand quantities (0, 4, 8 and 12%). This paper primarily discusses the water absorption test, uniaxial compressive strength, and dry density findings. It indicates that substituting sand with POBA greatly enhances the strength of foamed concrete. When the quantity of POBA was raised up to 12% throughout all curing times, the compressive strength steadily increased in the range of 4.34–13.50 N·mm–2. Furthermore, the dry density of foamed concrete was shown to be directly related to the fraction of POBA in the mixture. The dry density of foamed concrete increases as the amount of POBA increases. Despite this, water absorption shown that increasing POBA increases water absorption percentage in foamed concrete from 7.4 to 10.4%. This is due to the fact that a composition with a high POBA percentage will generate more pores than a mixture with a low POBA percentage.Keywords
This publication has 15 references indexed in Scilit:
- New inorganic binders containing ashes from agricultural wastes2017
- Cementitious materials and agricultural wastes as natural fine aggregate replacement in conventional mortar and concreteJournal of Building Engineering, 2016
- Effect of Mixing Ingredient on Compressive Strength of Oil Palm Shell Lightweight Aggregate Concrete Containing Palm Oil Fuel AshProcedia Engineering, 2015
- Utilization of Palm Oil Fuel Ash (POFA) in Producing Lightweight Foamed Concrete for Non-structural Building MaterialProcedia Engineering, 2015
- Utilisation of Oil Palm Ash in Foamed ConcreteMATEC Web of Conferences, 2014
- Fresh and hardened properties of lightweight foamed concrete with palm oil fuel ash as fillerConstruction and Building Materials, 2013
- Heat of hydration in foamed concrete: Effect of mix constituents and plastic densityCement and Concrete Research, 2006
- Utilising unprocessed low-lime coal fly ash in foamed concreteFuel, 2005
- Preliminary views on the potential of foamed concrete as a structural materialMagazine of Concrete Research, 2005
- Concrete from an agricultural waste-oil palm shell (OPS)Building and Environment, 2004