Capacitance-to-Digital Converter for Harvested Systems Down to 0.3 V With No Trimming, Reference, and Voltage Regulation
- 25 January 2023
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. 70 (4) , 1439-1449
Abstract
In this work, a capacitance-to-digital converter (CDC) suitable for direct energy harvesting is introduced. The nW peak power and the ability to operate at any supply voltage in the 0.3-1.8 V range allow complete suppression of any intermediate DC-DC conversion, and hence direct supply provision from the harvester, as demonstrated with a mm-scale solar cell. The proposed CDC architecture eliminates the need for any additional support circuitry, preserving true nW-power operation, and reducing design and integration effort. In detail, the architecture is based on a pair of double-swappable oscillators, and avoids the need for any voltage/current/frequency reference circuit in the oscillator mismatch compensation. The digital and differential nature of the architecture counteracts the effect of process/voltage/temperature variations. A load-agnostic one-time self-calibration scheme compensates mismatch, and can be run from boot to run stage of the chip lifecycle. The proposed self-calibration scheme suppresses any trimming or testing time for low-cost systems, and avoids any input capacitance disconnection requirement. A 180-nm testchip shows 7-bit ENOB down to 0.3 V and 1.37-nW total power, when powered by a 1-mm $^{2}$ indoor solar cell down to 10 lux (i.e., late twilight).Keywords
Funding Information
- Singapore Ministry of Education (MOE2019-T2-2-189)
This publication has 34 references indexed in Scilit:
- A Dual-Slope Capacitance-to-Digital Converter Integrated in an Implantable Pressure-Sensing SystemIEEE Journal of Solid-State Circuits, 2015
- 27.6 A 0.7pF-to-10nF fully digital capacitance-to-digital converter using iterative delay-chain discharge2015
- 27.7 A 0.05mm2 1V capacitance-to-digital converter based on period modulation2015
- 15.4b incremental sigma-delta capacitance-to-digital converter with zoom-in 9b asynchronous SAR2014
- 12.6 A 160nW 63.9fJ/conversion-step capacitance-to-digital converter for ultra-low-power wireless sensor nodes2014
- A 1.2-V 8.3-nJ CMOS Humidity Sensor for RFID ApplicationsIEEE Journal of Solid-State Circuits, 2013
- A fully-digital, 0.3V, 270 nW capacitive sensor interface without external references2011
- A Micropower $\Delta\Sigma$-Based Interface ASIC for a Capacitive 3-Axis Micro-AccelerometerIEEE Journal of Solid-State Circuits, 2009
- A 0.026mm2 capacitance-to-digital converter for biotelemetry applications using a charge redistribution technique2007
- Advances in Computation of the Maximum of a Set of Random Variables2006