A magnetically tuneable piezoresistive sensor for direct, in situ strain measurements in Li-ion batteries
Authors:
- 15 April 2015
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Analytical Methods
- Vol. 7 (17) , 7256-7263
Abstract
This paper demonstrates the first example of using generic Li-ion battery components (nickel, carboxymethylcellulose and styrene–butadiene rubber) to prepare piezoresistive materials (PRMs) which detect the strain of lithiating Sn in operando. The PRM was prepared by mixing the three components and molding it into a desired shape. Three different types of Ni microparticle arrangement strategies were investigated to study their effects on the piezoresistive performance: an alignment parallel to or perpendicular to the direction of strain, and no alignment (control and random dispersion). The alignment was directed by an external magnetic field during sample preparation and confirmed using cross-sectional SEM images. Significant differences were found between the different alignments, with the parallel alignment resulting in the lowest percolation threshold of 4 vol% Ni and perpendicular alignment the highest of 11 vol% Ni. For a fixed fraction of Ni microparticles at 4 vol%, the difference in alignment resulted in a difference in the gauge factor by three orders of magnitude. The stress–strain curve of the prepared PRMs showed a typical response seen for porous structures, which was consistent with the SEM images. The PRM samples are compatible with the low operating potential and the organic Li-ion electrolyte, and its porous structure allows electrolyte infusion that ensures the ionic conductivity of the material. Lithiation of Sn was successfully detected as a change in resistance using a parallelly aligned PRM with no additional treatment. The method described here offers significant merits over conventional approaches: the ability to directly monitor the strain without complex modelling, the simple low cost setup that does not require specialized equipment, and the ability to easily control the PRM performance by magnetically directed assembly.Keywords
This publication has 48 references indexed in Scilit:
- In-situ characterization of strain in lithium battery working electrodesJournal of Power Sources, 2014
- Real-time displacement and strain mappings of lithium-ion batteries using three-dimensional digital image correlationJournal of Power Sources, 2014
- Deformation and stress in electrode materials for Li-ion batteriesProgress in Materials Science, 2014
- In Situ Measurements of Strains in Composite Battery Electrodes during Electrochemical CyclingExperimental Mechanics, 2014
- Challenges in the development of advanced Li-ion batteries: a reviewEnergy & Environmental Science, 2011
- A review of the electrochemical performance of alloy anodes for lithium-ion batteriesJournal of Power Sources, 2011
- In Situ Observation of Strains during Lithiation of a Graphite ElectrodeJournal of the Electrochemical Society, 2010
- Nanomaterials for Rechargeable Lithium BatteriesAngewandte Chemie International Edition, 2008
- Solid-State NMR and Electrochemical Dilatometry Study on Li[sup +] Uptake/Extraction Mechanism in SiO ElectrodeJournal of the Electrochemical Society, 2007
- Direct evidence on anomalous expansion of graphite-negative electrodes on first charge by dilatometryJournal of Power Sources, 2001