EXPERIMENTAL INVESTIGATION OF WEAR PERFORMANCE OF Al7075/ZrO2/Gr HYBRID METAL MATRIX COMPOSITES USING TOPSIS AND ANN
- 1 January 2025
- journal article
- Published by University Library in Kragujevac in Advanced Engineering Letters
- Vol. 4 (4) , 210
Abstract
This study presents the effects of zirconium dioxide (ZrO2) with 50 nm and graphite (Gr) of 40 µm on the mechanical and tribological behaviour of an aluminium-based metal matrix composite (Al7075) made by stir casting. The tribological behaviour of wear and the frictional qualities of metal matrix composites (MMCs) are further investigated by performing dry sliding wear tests utilising the pin-on-disc method. The TOPSIS Approach was employed to optimise wear parameters such as wear rate (WR) and coefficient of friction (COF). The findings of the analysis of variance demonstrated that the load and incorporation of nanoparticles had a greater influence on WR and COF, respectively. The addition of ZrO2 results in a significant improvement in wear resistance rate, and COF is significantly reduced with reinforcement of higher wt% ZrO2. Artificial neural network (ANN) optimisation is performed to check the TOPSIS outcomes and found that the optimal level and its outputs are P1V1D1M1, with WR is 0.00142 mm3/m and COF is 0.182.Keywords
This publication has 20 references indexed in Scilit:
- Machining performance optimization of graphene carbon fiber hybrid composite using TOPSIS-Taguchi approachInternational Journal on Interactive Design and Manufacturing (IJIDeM), 2024
- Multi-objective optimization of performance characteristics in drilling of Mg AZ61 using twist end mill drill toolMaterials Today: Proceedings, 2021
- Production of Al6061 matrix composites with ZrO2 ceramic reinforcement using a low-cost stir casting technique: Microstructure, mechanical properties, and electrochemical behaviorJournal of Materials Research and Technology, 2020
- Synthesis and characterization of nano graphene and ZrO2 reinforced Al 6061 metal matrix compositesJournal of Materials Research and Technology, 2020
- Effect of mesh structure of tetrahedral amorphous carbon (ta-C) coating on friction and wear properties under base-oil lubrication conditionTribology International, 2020
- Enhancing thermal and mechanical response of aluminum using nanolength scale TiC ceramic reinforcementCeramics International, 2018
- Ballistic behavior of boron carbide reinforced AA7075 aluminium alloy using friction stir processing – An experimental study and analytical approachDefence Technology, 2016
- Application of ball milling in the synthesis of AA 7075–ZrO2 metal matrix nanocompositePowder Technology, 2015
- New Emerging Self-lubricating Metal Matrix Composites for Tribological Applications2015
- Dry Sliding Wear Characteristics of SiC and Al2O3 Nanoparticulate Aluminium Matrix Composite Using Taguchi TechniqueArabian Journal for Science and Engineering, 2014