Sensitivity improvement of infrared imaging video bolometer for divertor plasma measurement
- 1 June 2021
- journal article
- conference paper
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 92 (6) , 063521
Abstract
The sensitivity of an infrared imaging video bolometer (IRVB) was improved for the measurement of relatively low energy plasma radiation from the viewpoint of the metal foil absorber material. The photon energy of the radiation was considered up to 1 keV for the divertor plasma measurement. The thickness of the foil absorber was evaluated not only for conventional heavy elements, e.g., platinum, but also for light elements by the relation between the photon energy and attenuation length and by mechanical strength. A heat-transfer calculation using ANSYS suggested that light elements with practical foil thickness provide a higher temperature rise of the foil absorber compared with heavier elements with practical foil thickness. The maximum of the temperature rise was evaluated using He–Ne laser irradiation onto absorber samples. The material dependence of the temperature rise has a similar tendency between calculations and experiments. Experimentally, the sensitivity of the IRVB improved from 280 to 110 µW/cm2 using titanium with 1 µm thickness compared with conventional platinum with 2.5 µm thickness. Consequently, the signal-to-noise ratio of the IRVB could be improved from 2.8 to 9.1.Keywords
Funding Information
- Japan Society for the Promotion of Science (JP19K14689, JP17K14900)
- National Institute for Fusion Science (NIFS14KUGM086, IFS19KUHL089, NIFS18ULHH038)
This publication has 15 references indexed in Scilit:
- Plasma exhaust and divertor studies in Japan and Europe broader approach, DEMO design activityFusion Engineering and Design, 2018
- Improvement of infrared imaging video bolometer for application to deuterium experiment on the large helical deviceReview of Scientific Instruments, 2018
- Recent progress of divertor simulation research using the GAMMA 10/PDX tandem mirrorNuclear Fusion, 2017
- In situ calibration of the foil detector for an infrared imaging video bolometer using a carbon evaporation techniqueReview of Scientific Instruments, 2016
- Development of impurity seeding and radiation enhancement in the helical divertor of LHDNuclear Fusion, 2015
- Plasma Characterization in Divertor Simulation Experiments with a V-Shaped Target on GAMMA 10/PDXFusion Science and Technology, 2013
- Thermal Characteristics of Foils for an Imaging BolometerPlasma and Fusion Research, 2011
- Development of imaging bolometers for magnetic fusion reactors (invited)Review of Scientific Instruments, 2008
- Infrared imaging video bolometerReview of Scientific Instruments, 2000
- A low noise highly integrated bolometer array for absolute measurement of VUV and soft x radiationReview of Scientific Instruments, 1991