Abstract
Palladium (Pd)-based nanogap hydrogen sensors are essential for the safety of Fuel Cell Electric Vehicles (FCEVs). but typically suffer from severe thermal instability at elevated temperatures due to the coefficient of thermal expansion (CTE) mismatch between the metal film and elastomeric substrates. Here, we report a percolation-engineered corrugated Pd nanostructure where the sensing modality is fundamentally governed by a structural percolation transition. A critical percolation threshold is identified at a Pd thickness of t = 20 nm, marking the transition from an electrically disconnected regime to a partially percolated conductive network. This unique architecture enables dual-mode sensing, combining abrupt on-off switching for rapid safety alarms at high concentrations (~ 4% H2) with continuous, linear responses for high-resolution monitoring at low-ppm levels. The optimized 20 nm sensor demonstrates a broad detection range from 5 ppm to 4% H2, with superior signal amplification (> 400%) and rapid response times (~ 1.5–2 s) under air even at elevated temperatures. Notably, the device exhibits self-enhancing reliability during repeated hydrogen cycling; structural refinement narrows the nanogaps from 126 nm to 45.4 nm, which maintains a stable hydrogen-exposed resistance (RH) while progressively increasing the signal contrast. These findings establish a robust structural design rule for developing self-enhancing and thermally robust, dual-mode hydrogen sensors capable of stable operation up to 150 °C in demanding automotive and industrial environments.

This publication has 20 references indexed in Scilit: