Fast transition high voltage modulator using SiC MOSFETs connected in parallel
Authors:
- 1 December 2014
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Abstract
This study investigates the applicability of parallelly connected SiC MOSFETs to high voltage, high input current, and fast transient modulator. The behavior of the proposed approach was tested experimentally on a 650W prototype. The SiC MOSFET transistors were operated at nominal voltage of 840V and current of 800A. The modulator was loaded by a 30kV magnetron. Rise and fall times obtained at the magnetron were below 200nsec. The results of the present study show that the proposed approach can be a good engineering choice for high voltage and high current applications where very fast transition times are required.Keywords
This publication has 12 references indexed in Scilit:
- The Prototype Inductive Adder With Droop Compensation for the CLIC Kicker SystemsIEEE Transactions on Plasma Science, 2014
- Analysis and experimental evaluation of two low loss auxiliary circuits for the series connection of IGBT devices2013
- Initial measurements on a prototype inductive adder for the CLIC kicker systems2013
- An Experimentally Verified Active Gate Control Method for the Series Connection of IGBT/DiodesIEEE Transactions on Power Electronics, 2012
- Series connection of IGBT2010
- Compact solid state modulator & RF system2009
- Active Gate Control for Current Balancing of Parallel-Connected IGBT Modules in Solid-State ModulatorsIEEE Transactions on Plasma Science, 2008
- High voltage, high performance switch using series connected IGBTs2008 IEEE Power Electronics Specialists Conference, 2008
- Analog amplitude modulation of a high voltage, solid state inductive adder, pulse generator using MOSFETs2003
- Voltage balancing method for IGBTs connected in series2003