Reactive Compatibilization of Polyamide 6/Olefin Block Copolymer Blends: Phase Morphology, Rheological Behavior, Thermal Behavior, and Mechanical Properties
Open Access
Abstract
In this study, the morphology, rheological behavior, thermal behavior, and mechanical properties of a polyamide 6 (PA6) and olefin block copolymer (OBC) blend compatibilized with maleic anhydride-grafted polyethylene-octene copolymer (POE-g-MAH) were investigated. The morphological observations showed that the addition of POE-g-MAH enhanced the OBC particle dispersion in the PA6 matrix, suggesting a better interfacial compatibility between the pure PA6 and OBC. The results of the Fourier transform infrared (FTIR) spectroscopy analysis and the Molau test confirmed the compatibilization reactions between POE-g-MAH and PA6. The rheological test revealed that the melt viscosity, storage modulus (G’), and loss modulus (G”) of the compatibilized PA6/OBC blends at low frequency were increased with the increasing POE-g-MAH content. The thermal analysis indicated that the addition of OBC had little effect on the crystallization behavior of PA6, while the incorporation of POE-g-MAH at high content (7 wt%) in the PA6/OBC blend restricted the crystallization of PA6. In addition, the compatibilized blends exhibited a significant enhancement in impact strength compared to the uncompatibilized PA6/OBC blend, in which the highest value of impact strength obtained at a POE-g-MAH content of 7 wt% was about 194% higher than that of pure PA6 under our experimental conditions.Keywords
Funding Information
- National Natural Science Foundation of China (No. 11872179)
- Natural Science Foundation of Hainan Province (No. 2018JJ4072)
- High-level talents support plan of Xiamen University of Technology (No. YKJ19008R)
- Natural Science Foundation of Hainan Province (No. 2019JJ50132)
- the Science and Technology Plan Projects of Fujian Province (No. 2018H6024)
- the open fund for innovation platform in Hunan province (No. 18k079)
This publication has 49 references indexed in Scilit:
- Nonisothermal crystallization kinetic studies on melt processed poly(ethylene terephthalate)/polylactic acid blends containing graphene oxide and exfoliated graphite nanoplateletsJournal of Applied Polymer Science, 2019
- The Influence of the Blend Ratio in PA6/PA66/MWCNT Blend Composites on the Electrical and Thermal PropertiesPolymers, 2019
- Investigation of mechanical, dynamic mechanical, rheological and morphological properties of blends based on polypropylene (PP) and cyclic olefin copolymer (COC)European Polymer Journal, 2018
- Highly toughened polylactide (PLA) by reactive blending with novel polycaprolactone-based polyurethane (PCLU) blendsPolymer Testing, 2018
- Preparation of polystyrene-b-poly(ethylene/propylene)-b-polystyrene grafted glycidyl methacrylate and its compatibility with recycled polypropylene/recycled high impact polystyrene blendsPolymer, 2018
- Relationship between the interfacial tension and compatibility of polycarbonate and poly(acrylonitrile–butadiene–styrene) blends with reactive compatibilizersJournal of Applied Polymer Science, 2018
- Toughening of Poly(lactic acid) and Thermoplastic Cassava Starch Reactive Blends Using Graphene NanoplateletsPolymers, 2018
- Processable conductive graphene/polyethylene nanocomposites: Effects of graphene dispersion and polyethylene blending with oxidized polyethylene on rheology and microstructurePolymer, 2016
- Influence of reactive compatibilizers on the rheometrical and mechanical properties of PA6/LDPE and PA6/HDPE blendsJournal of Materials Science, 2010
- Polyamide‐6/high‐density polyethylene blend using recycled high‐density polyethylene as compatibilizer: Morphology, mechanical properties, and thermal stabilityPolymer Engineering & Science, 2009