LCLingna Cui

Lingna Cui

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Lingna Cui has a total of 10 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    The Effect of Stretching on the Crystal Structure and Crystal Orientation of PA510/SiO2 Films

    by Lingna Cui, Yu Dong, Yuejun Liu, Shuhong Fan

    In order to explore the relationship between the microstructure and macroscopic properties of PA510/SiO2 films, the effect of the stretching on the crystal structure and crystal orientation of stretched PA510/SiO2 films was studied. It could be seen from the transmission electron microscopy (TEM) graphs that the layered SiO2 molecules were mainly oriented toward the machine direction (MD) and the dispersion could be improved by stretching. Through wide-angle X-ray scattering (WAXS) analysis, PA510/SiO2 stretched films only contained a γ crystal form. During uniaxial stretching, especially for 1 × 3 film, the γ1(100) crystal form was obviously oriented in the equatorial direction, and the orientation of γ2(004) and γ3(006) crystal forms could be observed in the meridian direction. According to the Herman orientation function, the orientation of the b-axis in the MD increased with the increase of the stretching ratio. It was worth noting that the orientation of the crystal region was more obvious. The addition of SiO2 and the orientation of the crystalline and amorphous regions could improve the barrier properties of the films. The changes in the optical properties of stretched films were affected by the dispersion state of SiO2 and the surface roughness.


  • Open Access

    Reactive Compatibilization of Polyamide 6/Olefin Block Copolymer Blends: Phase Morphology, Rheological Behavior, Thermal Behavior, and Mechanical Properties

    by Xintu Lin, Yuejun Liu, Xi Chen, Yincai Wu, Lingna Cui, Long Mao, Wei Zheng, Minghao Lin

    In this study, the morphology, rheological behavior, thermal behavior, and mechanical properties of a polyamide 6 (PA6) and olefin block copolymer (OBC) blend compatibilized with maleic anhydride-grafted polyethylene-octene copolymer (POE-g-MAH) were investigated. The morphological observations showed that the addition of POE-g-MAH enhanced the OBC particle dispersion in the PA6 matrix, suggesting a better interfacial compatibility between the pure PA6 and OBC. The results of the Fourier transform infrared (FTIR) spectroscopy analysis and the Molau test confirmed the compatibilization reactions between POE-g-MAH and PA6. The rheological test revealed that the melt viscosity, storage modulus (G’), and loss modulus (G”) of the compatibilized PA6/OBC blends at low frequency were increased with the increasing POE-g-MAH content. The thermal analysis indicated that the addition of OBC had little effect on the crystallization behavior of PA6, while the incorporation of POE-g-MAH at high content (7 wt%) in the PA6/OBC blend restricted the crystallization of PA6. In addition, the compatibilized blends exhibited a significant enhancement in impact strength compared to the uncompatibilized PA6/OBC blend, in which the highest value of impact strength obtained at a POE-g-MAH content of 7 wt% was about 194% higher than that of pure PA6 under our experimental conditions.