Influence of the geometric parameters of a vertical rotational single-sheet tester on sample field homogeneity
- 6 June 2023
- journal article
- research article
- Published by Emerald Publishing in COMPEL - The international journal for computation and mathematics in electrical and electronic engineering
- Vol. ahead-of-p (ahead-of-p) , 914-928
Abstract
The horizontal rotational single-sheet tester (RSST) suffers from weaknesses such as the reduced size of test samples, measurement disturbances due to magnetic flux leakage and nonhomogeneity of field in the measurement area. Although the vertical RSST allows to overcome the first two aforementioned drawbacks, the heterogeneity of the field in the test sample remains an issue. In addition, there is still a lack of device standardization to ensure test repeatability, as already is well established with the Epstein frame. This paper aims to investigate the influence of several parameters on the field homogeneity in the test sample. A fully 3D finite element model of a vertical RSST is developed and used to perform a sensibility study on several geometrical parameters. The influence of several parameters on the field homogeneity in the test sample, such as the geometrical dimensions of the yokes, the presence or not of holes drilled inside the test sample for B-coil placement as well as the size of the H-coils and B-coils, is addressed. It is expected that this study will contribute to the optimization and standardization vertical RSSTs.Keywords
This publication has 32 references indexed in Scilit:
- Gmsh: A 3‐D finite element mesh generator with built‐in pre‐ and post‐processing facilitiesInternational Journal for Numerical Methods in Engineering, 2009
- Study of the Counterclockwise/Clockwise (CCW/CW) Rotational Losses Measured with a Two‐dimensional Vector Magnetic Property Measurement SystemIEEJ Transactions on Electrical and Electronic Engineering, 2008
- A general environment for the treatment of discrete problems and its application to the finite element methodIEEE Transactions on Magnetics, 1998
- A two-dimensional single sheet tester incorporating controlled magnetization directionJournal of Applied Physics, 1996
- 2D analysis of rotational loss testerIEEE Transactions on Magnetics, 1995
- A two-dimensional measuring equipment for electrical steelIEEE Transactions on Magnetics, 1994
- Two dimensional measurement of magnetic field and core loss using a square specimen testerIEEE Transactions on Magnetics, 1993
- Rotational power loss of silicon steel sheetIEEE Transactions on Magnetics, 1990
- Evaluation of the elastic moduli of a transversely isotropic aggregate of cubic crystalsJournal of the Mechanics and Physics of Solids, 1985
- Method for the measurement of rotational power loss and related properties in electrical steel sheets;IEEE Transactions on Magnetics, 1982