Olivier Ninet
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Olivier Ninet has a total of 27 co-authors. Here are the top co-authors by number of shared publications:
- Guillaume Parent
Univ. Artois, UR 4025
4 shared publications - Jean Vianei Leite
Department of Electrical and Electronic Engineering, Federal University of Santa Catarina, Florianpolis, Brazil
3 shared publications - Jean-Philippe Lecointe
Univ Lille Nord de France, F-59000 Lille, France
3 shared publications - Fabrice Morganti
Univ. Artois, UR 4025, LSEE
2 shared publications - Farid Zidat
France
2 shared publications - Gabriel Velu
UR 4025, Laboratoire Systèmes Electrotechniques et Environnement (LSEE), Univ. Artois, 62400 Béthune, France
2 shared publications
Latest Publications
- Open Access
- 1 January 2026
- Published by FapUNIFESP (SciELO) in Journal of Microwaves, Optoelectronics and Electromagnetic Applications
- Vol. 25 (3)
Logistic Based Modeling of Magnetic Saturation and Anisotropy in Ferromagnetic Materials
This study introduces a new methodology for modeling the nonlinear behavior and the magnetic anisotropy of ferromagnetic materials. The proposed approach was adapted from models used to represent population growth based on Logistic-type functions. For the purposes of this paper, the model was adapted to describe magnetic induction under an imposed magnetic field, taking into account the magnetic anisotropy present in grain-oriented electrical steels. The following results demonstrate that magnetic anisotropy can be accurately modeled using a set of parameters obtained from polynomial functions as a function of the excitation angle. The model was validated by comparing calculated and experimental data.
- 1 January 2026
- Published by FapUNIFESP (SciELO) in Journal of Microwaves, Optoelectronics and Electromagnetic Applications
- Vol. 25 (3)
Open AccessLogistic Based Modeling of Magnetic Saturation and Anisotropy in Ferromagnetic Materials
This study introduces a new methodology for modeling the nonlinear behavior and the magnetic anisotropy of ferromagnetic materials. The proposed approach was adapted from models used to represent population growth based on Logistic-type functions. For the purposes of this paper, the model was adapted to describe magnetic induction under an imposed magnetic field, taking into account the magnetic anisotropy present in grain-oriented electrical steels. The following results demonstrate that magnetic anisotropy can be accurately modeled using a set of parameters obtained from polynomial functions as a function of the excitation angle. The model was validated by comparing calculated and experimental data.
- 8 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. PP (00189464) , 1
A Coenergy-Based Methodology for Modeling Anisotropy in Grain-Oriented Electrical Steel
This work focuses on the vectorization of the magnetic anisotropy model for grain-oriented steel sheets by exploiting coenergy computation and interpolation methods. The proposed approach is based on a modified representation of coenergy isocontours in elliptical form. A novel method for measuring the 2D anhysteretic properties with a rotational single sheet tester is proposed. The model precision is analyzed together with a reduced number of directions.
- 8 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. PP (00189464) , 1
A Coenergy-Based Methodology for Modeling Anisotropy in Grain-Oriented Electrical Steel
This work focuses on the vectorization of the magnetic anisotropy model for grain-oriented steel sheets by exploiting coenergy computation and interpolation methods. The proposed approach is based on a modified representation of coenergy isocontours in elliptical form. A novel method for measuring the 2D anhysteretic properties with a rotational single sheet tester is proposed. The model precision is analyzed together with a reduced number of directions.
- 6 June 2023
- Published by Emerald Publishing in COMPEL - The international journal for computation and mathematics in electrical and electronic engineering
- Vol. ahead-of-p (ahead-of-p) , 914-928
Influence of the geometric parameters of a vertical rotational single-sheet tester on sample field homogeneity
The horizontal rotational single-sheet tester (RSST) suffers from weaknesses such as the reduced size of test samples, measurement disturbances due to magnetic flux leakage and nonhomogeneity of field in the measurement area. Although the vertical RSST allows to overcome the first two aforementioned drawbacks, the heterogeneity of the field in the test sample remains an issue. In addition, there is still a lack of device standardization to ensure test repeatability, as already is well established with the Epstein frame. This paper aims to investigate the influence of several parameters on the field homogeneity in the test sample. A fully 3D finite element model of a vertical RSST is developed and used to perform a sensibility study on several geometrical parameters. The influence of several parameters on the field homogeneity in the test sample, such as the geometrical dimensions of the yokes, the presence or not of holes drilled inside the test sample for B-coil placement as well as the size of the H-coils and B-coils, is addressed. It is expected that this study will contribute to the optimization and standardization vertical RSSTs.
- 6 June 2023
- Published by Emerald Publishing in COMPEL - The international journal for computation and mathematics in electrical and electronic engineering
- Vol. ahead-of-p (ahead-of-p) , 914-928
Influence of the geometric parameters of a vertical rotational single-sheet tester on sample field homogeneity
The horizontal rotational single-sheet tester (RSST) suffers from weaknesses such as the reduced size of test samples, measurement disturbances due to magnetic flux leakage and nonhomogeneity of field in the measurement area. Although the vertical RSST allows to overcome the first two aforementioned drawbacks, the heterogeneity of the field in the test sample remains an issue. In addition, there is still a lack of device standardization to ensure test repeatability, as already is well established with the Epstein frame. This paper aims to investigate the influence of several parameters on the field homogeneity in the test sample. A fully 3D finite element model of a vertical RSST is developed and used to perform a sensibility study on several geometrical parameters. The influence of several parameters on the field homogeneity in the test sample, such as the geometrical dimensions of the yokes, the presence or not of holes drilled inside the test sample for B-coil placement as well as the size of the H-coils and B-coils, is addressed. It is expected that this study will contribute to the optimization and standardization vertical RSSTs.
- 8 April 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 58 (8) , 1-5
Modeling of Magnetic Anisotropy in Electrical Steel Sheet by Means of Cumulative Distribution Functions of Gaussians
This article proposes a methodology for modeling magnetic anisotropy in ferromagnetic materials. This approach was initially used to represent the isothermal remanent magnetization (IRM) acquired by natural mineral assemblages and based on the use of the cumulative distribution function (CDF) of a probability density function (PDF). For the purpose of this work, the anisotropy of electrical steel sheets is modeled by means of CDFs of Gaussians. The methodology is validated by comparisons between numerical and experimental data obtained from an Epstein frame and a Rotational Single Sheet Tester. The outcomes of the study are twofold: first, the parameters defining the CDF follow a polynomial trendline, and second, they can easily be calculated from a limited amount of experimental data which is a key point from an engineering point of view.
- 8 April 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 58 (8) , 1-5
Modeling of Magnetic Anisotropy in Electrical Steel Sheet by Means of Cumulative Distribution Functions of Gaussians
This article proposes a methodology for modeling magnetic anisotropy in ferromagnetic materials. This approach was initially used to represent the isothermal remanent magnetization (IRM) acquired by natural mineral assemblages and based on the use of the cumulative distribution function (CDF) of a probability density function (PDF). For the purpose of this work, the anisotropy of electrical steel sheets is modeled by means of CDFs of Gaussians. The methodology is validated by comparisons between numerical and experimental data obtained from an Epstein frame and a Rotational Single Sheet Tester. The outcomes of the study are twofold: first, the parameters defining the CDF follow a polynomial trendline, and second, they can easily be calculated from a limited amount of experimental data which is a key point from an engineering point of view.
- 13 January 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 56 (3) , 1-9
Modeling and Experimental Characterization of Nickel-Coated Copper Wires for the Design of Extremely High-Temperature Electrical Machines
The requirement for electrical machines operating at extremely high temperatures has prompted researchers to focus on new materials. The use of nickel-coated copper (Cu/Ni) wires can be a promising alternative to copper wires because of their resistance to oxidation at high temperatures. In this paper, the characterization of Cu/Ni wires’ electrical resistance in the frequency domain as well as the measurement of pure nickel’s B(H) curve have been specified. The effect of nickel-coated on a copper wire is remarkable in terms of electrical resistance at high frequencies because of the skin effect and eddy currents. An original model has been proposed for the prediction of the electrical resistance. The originality is to consider the bimetallic conductor as a transformer in order to generate its model. Since the analytical calculation is not possible because of the non-linearity of nickel’s magnetic properties, a new numerical computational method for the determination of the impedances was proposed. The modeling results are correlated with the experimental tests made on 3 Cu/Ni wires: 0.3mm diameter with 27% of nickel in volume and 0.5mm diameter with 8 μm and 18 μm nickel thickness. The study thus provides essential information about the important parameters for the performance of electrical machines.
- 13 January 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 56 (3) , 1-9
Modeling and Experimental Characterization of Nickel-Coated Copper Wires for the Design of Extremely High-Temperature Electrical Machines
The requirement for electrical machines operating at extremely high temperatures has prompted researchers to focus on new materials. The use of nickel-coated copper (Cu/Ni) wires can be a promising alternative to copper wires because of their resistance to oxidation at high temperatures. In this paper, the characterization of Cu/Ni wires’ electrical resistance in the frequency domain as well as the measurement of pure nickel’s B(H) curve have been specified. The effect of nickel-coated on a copper wire is remarkable in terms of electrical resistance at high frequencies because of the skin effect and eddy currents. An original model has been proposed for the prediction of the electrical resistance. The originality is to consider the bimetallic conductor as a transformer in order to generate its model. Since the analytical calculation is not possible because of the non-linearity of nickel’s magnetic properties, a new numerical computational method for the determination of the impedances was proposed. The modeling results are correlated with the experimental tests made on 3 Cu/Ni wires: 0.3mm diameter with 27% of nickel in volume and 0.5mm diameter with 8 μm and 18 μm nickel thickness. The study thus provides essential information about the important parameters for the performance of electrical machines.
- 1 July 2019
- Published by Emerald Publishing in COMPEL - The international journal for computation and mathematics in electrical and electronic engineering
- Vol. 38 (4) , 1253-1262
Design of an induction machine with damper windings for noise and vibrations reduction
Purpose: The purpose of this paper is to present a design method for induction machines including a three-phase damper winding for noise and vibrations reduction. Design/methodology/approach: In the first part, the principle of the damper winding is recalled. The second part presents the iterative design method which is applied on a 4-kW pulse width modulation (PWM)-fed induction machine to study the impact of the additional winding on the geometry. In the third part, the finite-element method is used to validate the designed geometry and highlight the harmonic flux density reduction. Finally, some experimental results are given. Findings: The study shows that the impact of the additional three-phase winding on the geometry and weight of the machine is low. Moreover, the proposed noise reduction method allows one to reduce the total noise level of a PWM-fed induction machine up to 8.5 dBA. Originality/value: The originality of the paper concerns the design and characterization of a three-phase damper winding for a noiseless induction machine. The principle of this proposed noise reduction method is new and has been patented.
- 1 July 2019
- Published by Emerald Publishing in COMPEL - The international journal for computation and mathematics in electrical and electronic engineering
- Vol. 38 (4) , 1253-1262
Design of an induction machine with damper windings for noise and vibrations reduction
Purpose: The purpose of this paper is to present a design method for induction machines including a three-phase damper winding for noise and vibrations reduction. Design/methodology/approach: In the first part, the principle of the damper winding is recalled. The second part presents the iterative design method which is applied on a 4-kW pulse width modulation (PWM)-fed induction machine to study the impact of the additional winding on the geometry. In the third part, the finite-element method is used to validate the designed geometry and highlight the harmonic flux density reduction. Finally, some experimental results are given. Findings: The study shows that the impact of the additional three-phase winding on the geometry and weight of the machine is low. Moreover, the proposed noise reduction method allows one to reduce the total noise level of a PWM-fed induction machine up to 8.5 dBA. Originality/value: The originality of the paper concerns the design and characterization of a three-phase damper winding for a noiseless induction machine. The principle of this proposed noise reduction method is new and has been patented.
- 13 August 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Energy Conversion
- Vol. 34 (2) , 782-788
A Noninvasive External Flux Based Method for In-Service Induction Motors Torque Estimation
This paper presents a novel method to determine the electromagnetic torque of grid-powered induction machines (IM). The torque determination constitutes a key point for the energy diagnosis and for choosing the well adapted motor in industrial processes. The proposed method is non-invasive as it is based on the measurement of the current and the magnetic external flux around induction machines. The torque estimation protocol is explained and experimental validations are made with an 11 kW IM. The impact of supply voltage variations on the accuracy of the proposed method is also analyzed.
- 13 August 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Energy Conversion
- Vol. 34 (2) , 782-788
A Noninvasive External Flux Based Method for In-Service Induction Motors Torque Estimation
This paper presents a novel method to determine the electromagnetic torque of grid-powered induction machines (IM). The torque determination constitutes a key point for the energy diagnosis and for choosing the well adapted motor in industrial processes. The proposed method is non-invasive as it is based on the measurement of the current and the magnetic external flux around induction machines. The torque estimation protocol is explained and experimental validations are made with an 11 kW IM. The impact of supply voltage variations on the accuracy of the proposed method is also analyzed.
- 30 April 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 54 (5) , 4147-4155
Equivalent Circuit of PWM-Fed Induction Machine With Damper Winding for Noise and Vibration Reduction
This paper presents a system that enables the passive reduction of noise and vibrations in a three-phase induction machine with a stator damper winding connected to capacitors. This is a simple and effective system for reducing the flux density harmonics in an electrical machine. The theoretical study is based on the modeling of a machine equipped with the damper winding obtained from Kron's theory about equivalent circuits of electrical machinery. The analysis of the equivalent circuit allows one to identify possibilities to reduce the flux density harmonics responsible of unwanted noise and vibration components. Finally, an experimental validation is performed.
- 30 April 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 54 (5) , 4147-4155
Equivalent Circuit of PWM-Fed Induction Machine With Damper Winding for Noise and Vibration Reduction
This paper presents a system that enables the passive reduction of noise and vibrations in a three-phase induction machine with a stator damper winding connected to capacitors. This is a simple and effective system for reducing the flux density harmonics in an electrical machine. The theoretical study is based on the modeling of a machine equipped with the damper winding obtained from Kron's theory about equivalent circuits of electrical machinery. The analysis of the equivalent circuit allows one to identify possibilities to reduce the flux density harmonics responsible of unwanted noise and vibration components. Finally, an experimental validation is performed.
- 21 March 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 54 (6) , 1-6
High-Temperature Magnetic Characterization Using an Adapted Epstein Frame
The most common method for the electrical steel sheet characterization uses the Epstein frame. However, in the case of high-temperature characterization, the standard Epstein frame is not adapted. This paper deals with the design of a frame adapted to high temperature, up to 600 °C. In a first step, the results at ambient temperature obtained between the normalized Epstein frame and the high-temperature device for different frequencies are compared in order to validate the new frame. The second step is dedicated to the characterization of soft ferromagnetic materials in high temperature, up to 600 °C and for different frequencies. Moreover, the effect of sheet thickness on their behavior has been studied at high temperatures. The obtained measurement results confirm the strong influence of both temperature and thickness on power losses.
- 21 March 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 54 (6) , 1-6
High-Temperature Magnetic Characterization Using an Adapted Epstein Frame
The most common method for the electrical steel sheet characterization uses the Epstein frame. However, in the case of high-temperature characterization, the standard Epstein frame is not adapted. This paper deals with the design of a frame adapted to high temperature, up to 600 °C. In a first step, the results at ambient temperature obtained between the normalized Epstein frame and the high-temperature device for different frequencies are compared in order to validate the new frame. The second step is dedicated to the characterization of soft ferromagnetic materials in high temperature, up to 600 °C and for different frequencies. Moreover, the effect of sheet thickness on their behavior has been studied at high temperatures. The obtained measurement results confirm the strong influence of both temperature and thickness on power losses.
- 2 May 2017
- Published by Emerald Publishing in COMPEL - The international journal for computation and mathematics in electrical and electronic engineering
- Vol. 36 (3) , 692-701
Impact of supply voltage variations on external magnetic field emitted by induction machines
Purpose: This paper aims to study the influence of supply voltage variations on the external magnetic field emitted by grid-powered induction machines (IMs). Design/methodology/approach: Two models are developed in the paper to analyse, for different supply voltage values, the influence of the variations of the magnetizing voltage for which there is a link with the tangential component of the external flux. The first is an analytical model based on the IM single-phase-equivalent circuit with variable magnetizing reactance to take into account the saturation of the magnetic circuit. The second is a numerical finite element simulation to model the same phenomenon. Results of both models are analysed with experimental measures of the external flux. Findings: The study shows that the amplitude of the external field strongly depends on supply voltage values. Research limitations/implications: The investigation is mainly focused on the tangential component of the external magnetic field which is of high importance concerning the applicability of non-invasive methods of diagnosis, as electromagnetic torque estimation developed by the authors or internal fault determination. Originality/value: The originality of the paper concerns the characterization of the external flux with the supply voltage for IMs. It is shown that the magnetic circuit radiates external flux differently with the load and with the supply voltage.
- 2 May 2017
- Published by Emerald Publishing in COMPEL - The international journal for computation and mathematics in electrical and electronic engineering
- Vol. 36 (3) , 692-701
Impact of supply voltage variations on external magnetic field emitted by induction machines
Purpose: This paper aims to study the influence of supply voltage variations on the external magnetic field emitted by grid-powered induction machines (IMs). Design/methodology/approach: Two models are developed in the paper to analyse, for different supply voltage values, the influence of the variations of the magnetizing voltage for which there is a link with the tangential component of the external flux. The first is an analytical model based on the IM single-phase-equivalent circuit with variable magnetizing reactance to take into account the saturation of the magnetic circuit. The second is a numerical finite element simulation to model the same phenomenon. Results of both models are analysed with experimental measures of the external flux. Findings: The study shows that the amplitude of the external field strongly depends on supply voltage values. Research limitations/implications: The investigation is mainly focused on the tangential component of the external magnetic field which is of high importance concerning the applicability of non-invasive methods of diagnosis, as electromagnetic torque estimation developed by the authors or internal fault determination. Originality/value: The originality of the paper concerns the characterization of the external flux with the supply voltage for IMs. It is shown that the magnetic circuit radiates external flux differently with the load and with the supply voltage.