Flexural Strength Estimation for Hollow Cross-Section Simply Supported UHPC Beams
Open Access
- 1 December 2021
- journal article
- research article
- Published by Walter de Gruyter GmbH in Civil and Environmental Engineering
- Vol. 17 (2) , 476-484
Abstract
The hollow structural elements occupy a great deal of researchers’ interest due to the possibility of losing their weights and maintaining or developing their resistances especially when increasing both compressive and tensile strength of modern materials. The flexural strength based on the forces balance and stain compatibility was derived. Nine beams of Ultra High Performance concrete (UHPC) and conventional reinforced steel bars were casted. Several parameters were taken which are the thickness of the concrete top flange, thickness of the concrete bottom flange, depth of the longitudinal hollow and the ratio of the longitudinal reinforcing steel. By comp aring the practical and theoretical results, the proposed flexural strength provided a safety factor of one-fifth against the experimental collected data. The ultimate flexural force developed up 260 % when increasing the reinforced steel area 4.6 times and 230 % comparing with the solid beam. Many aspect ratios were also mentioned that keep the strength in developing.Keywords
This publication has 3 references indexed in Scilit:
- Residual Tensile Stress Estimation for Shear Strength of UHPC Nonprismatic BeamsCivil and Environmental Engineering, 2021
- Structural Behavior of HS-SC Reinforced Concrete Beams with Longitudinal and Transverse Openings Strengthened with CFRP LaminatesJournal of Engineering and Sustainable Development, 2018
- Flexural Behaviour of Reinforced Concrete Beam with Hollow Core at Various DepthInternational Journal of Science and Research (IJSR), 2015