Nasser Hakeem Tu’MA
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Nasser Hakeem Tu’MA has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- AbdulMuttailb Issa Said
Department of Civil Engineering, College of Engineering, University of Baghdad, Baghdad 17001, Iraq
2 shared publications Rasool Dakhil Mohsin
College of Engineering , University of Misan , Misan , Iraq
2 shared publicationsHaider Abdul-Kareem Raheem
College of Engineering , University of Misan , Misan , Iraq
1 shared publicationKhatam Salim Hussein
Department of Civil Engineering, Misan University, Misan, Iraq
1 shared publicationMohammed Naji Hammood
College of Engineering , University of Missan , Misan , Iraq
1 shared publicationTu’ma
1 shared publication
Latest Publications
- Open Access
- 18 January 2026
- Published by Walter de Gruyter GmbH in Civil and Environmental Engineering
Experimental Investigation of Eccentric Composite Hollow Steel-Concrete Tensioned Column
The current research offers scientific originality due to the lack of studies related to composite columns in enhancing tensile resistance as a result of the presence of non-axial tensile forces in many civil engineering applications. The research gap lies in using a composite section of hollow steel and concrete to produce a column that resists eccentric tensile forces. Five short composite columns as well as two reference columns were casted to study the effect of the existing of hollow steel section and different types of the eccentricities on the tensile strength of the composite short column. The designs were prepared to accommodate all the variables mentioned for calculating net forces and internal resisting moments of the section. The main conclusion of the current study confirmed the possibility of using the composite column in places that are exposed to eccentric tensile forces with a high efficiency of up to 17%. Also, laboratory tests showed that the optimal eccentric loading distance is the distance that is 15% greater or less than the balanced eccentric distance in order to maintain the tensile strengths at the highest level.
- 18 January 2026
- Published by Walter de Gruyter GmbH in Civil and Environmental Engineering
Open AccessExperimental Investigation of Eccentric Composite Hollow Steel-Concrete Tensioned Column
The current research offers scientific originality due to the lack of studies related to composite columns in enhancing tensile resistance as a result of the presence of non-axial tensile forces in many civil engineering applications. The research gap lies in using a composite section of hollow steel and concrete to produce a column that resists eccentric tensile forces. Five short composite columns as well as two reference columns were casted to study the effect of the existing of hollow steel section and different types of the eccentricities on the tensile strength of the composite short column. The designs were prepared to accommodate all the variables mentioned for calculating net forces and internal resisting moments of the section. The main conclusion of the current study confirmed the possibility of using the composite column in places that are exposed to eccentric tensile forces with a high efficiency of up to 17%. Also, laboratory tests showed that the optimal eccentric loading distance is the distance that is 15% greater or less than the balanced eccentric distance in order to maintain the tensile strengths at the highest level.
- Open Access
- 1 January 2024
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 3059 (1) , 050002
Effect of using NSM CFRP and steel casing on the structural behavior of simply supported RC beams with transverse openings
In modern buildings, the structural members may have openings for utilizing passes and the necessary efforts should be taken to keep them structurally safe. The
- 1 January 2024
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 3059 (1) , 050002
Open AccessEffect of using NSM CFRP and steel casing on the structural behavior of simply supported RC beams with transverse openings
In modern buildings, the structural members may have openings for utilizing passes and the necessary efforts should be taken to keep them structurally safe. The
- 20 March 2022
- Published by Springer Nature
- p. 523-530
Yield Line Model for Estimation Shear Strength UHPC Non-prismatic Beams
- 20 March 2022
- Published by Springer Nature
- p. 523-530
Yield Line Model for Estimation Shear Strength UHPC Non-prismatic Beams
- Open Access
- 1 December 2021
- Published by Walter de Gruyter GmbH in Civil and Environmental Engineering
- Vol. 17 (2) , 476-484
Flexural Strength Estimation for Hollow Cross-Section Simply Supported UHPC Beams
The hollow structural elements occupy a great deal of researchers’ interest due to the possibility of losing their weights and maintaining or developing their resistances especially when increasing both compressive and tensile strength of modern materials. The flexural strength based on the forces balance and stain compatibility was derived. Nine beams of Ultra High Performance concrete (UHPC) and conventional reinforced steel bars were casted. Several parameters were taken which are the thickness of the concrete top flange, thickness of the concrete bottom flange, depth of the longitudinal hollow and the ratio of the longitudinal reinforcing steel. By comp aring the practical and theoretical results, the proposed flexural strength provided a safety factor of one-fifth against the experimental collected data. The ultimate flexural force developed up 260 % when increasing the reinforced steel area 4.6 times and 230 % comparing with the solid beam. Many aspect ratios were also mentioned that keep the strength in developing.
- 1 December 2021
- Published by Walter de Gruyter GmbH in Civil and Environmental Engineering
- Vol. 17 (2) , 476-484
Open AccessFlexural Strength Estimation for Hollow Cross-Section Simply Supported UHPC Beams
The hollow structural elements occupy a great deal of researchers’ interest due to the possibility of losing their weights and maintaining or developing their resistances especially when increasing both compressive and tensile strength of modern materials. The flexural strength based on the forces balance and stain compatibility was derived. Nine beams of Ultra High Performance concrete (UHPC) and conventional reinforced steel bars were casted. Several parameters were taken which are the thickness of the concrete top flange, thickness of the concrete bottom flange, depth of the longitudinal hollow and the ratio of the longitudinal reinforcing steel. By comp aring the practical and theoretical results, the proposed flexural strength provided a safety factor of one-fifth against the experimental collected data. The ultimate flexural force developed up 260 % when increasing the reinforced steel area 4.6 times and 230 % comparing with the solid beam. Many aspect ratios were also mentioned that keep the strength in developing.
- Open Access
- 1 September 2021
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 856 (1) , 012003
Numerical Modeling for Flexural Behavior of UHPC Beams Reinforced with Steel and Sand-Coated CFRP Bars
Many properties of advanced materials need to be studied, including ultra high performance concrete (UHPC) as well as the Carbon Polymer Reinforcing Fiber (CFRP) rods of sand coated surfaces. The combined action of (UHPC) with (CFRP) is of constructive importance for researchers to know the behavior of the structural members in different loading stages. Eight samples were prepared with dimensions of 2.4 meters in length, 0.25 meters in depth, and 150 mm in width. The compressive strength of 110 MPa was selected after preparing many trail mixes. A computer model by ANSYS 11 program was made for the representation of all inputs, including steel fibers. All Parts of beams, testing accessories, and loads were simulated with adequate elements. The study examined the effect of the orientation of steel fibers on the flexural capacity in terms of load-deflection response. It was concluded that the distribution of the steel fibers plays a fundamental role in the behavior of the models, and thus the optimal distribution was found to be orthogonal distribution to the longitudinal direction of UHPC beam in equal ratios.
- 1 September 2021
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 856 (1) , 012003
Open AccessNumerical Modeling for Flexural Behavior of UHPC Beams Reinforced with Steel and Sand-Coated CFRP Bars
Many properties of advanced materials need to be studied, including ultra high performance concrete (UHPC) as well as the Carbon Polymer Reinforcing Fiber (CFRP) rods of sand coated surfaces. The combined action of (UHPC) with (CFRP) is of constructive importance for researchers to know the behavior of the structural members in different loading stages. Eight samples were prepared with dimensions of 2.4 meters in length, 0.25 meters in depth, and 150 mm in width. The compressive strength of 110 MPa was selected after preparing many trail mixes. A computer model by ANSYS 11 program was made for the representation of all inputs, including steel fibers. All Parts of beams, testing accessories, and loads were simulated with adequate elements. The study examined the effect of the orientation of steel fibers on the flexural capacity in terms of load-deflection response. It was concluded that the distribution of the steel fibers plays a fundamental role in the behavior of the models, and thus the optimal distribution was found to be orthogonal distribution to the longitudinal direction of UHPC beam in equal ratios.