Hydroforming Limits in Metal Bellows Forming Process
Authors:
- 3 December 2010
- journal article
- research article
- Published by Taylor & Francis in Materials and Manufacturing Processes
- Vol. 25 (12) , 1413-1417
Abstract
Metal bellows have wide applications in aerospace, micro-electromechanical, and industrial systems. Some defects such as wrinkling and bursting may occur during the metal bellows forming process. In contrast to wrinkling, bursting is generally classified as an irrecoverable failure mode. In order to obtain sound products, it is necessary to predict the bursting behavior. Bursting in the tube-bulging process is a consequence of necking. Thus, prediction of necking initiation is a vital issue before designing the details of the process. In this article, the forming limit diagram (FLD) and the forming limit stress diagram (FLSD) have been used to predict the initiation of necking in metal bellows forming processes. Afterwards, the implementation of the forming strain and stress limit diagrams into finite element (FE) numerical simulations for the forming of the metal bellows is established by using an explicit FE code (LS-Dyna). Finally, the results of finite element method (FEM) and experiments show good agreement.Keywords
This publication has 16 references indexed in Scilit:
- Implementation of the forming limit stress diagram to obtain suitable load path in tube hydroforming considering M–K modelMaterials & Design (1980-2015), 2009
- Evaluation of effective parameters in metal bellows forming processJournal of Materials Processing Technology, 2009
- A methodology for prediction of forming limit stress diagrams considering the strain path effectComputational Materials Science, 2009
- Effect of Thermomechanical Processing on Forming Limit Diagrams Predicted by Neural NetworksMaterials and Manufacturing Processes, 2008
- A Study to Predict Failure in Biaxially Stretched Sheets of Aluminum Alloy 2024-T3Materials and Manufacturing Processes, 2008
- Forming various shapes of tubular bellows using a single-step hydroforming processJournal of Materials Processing Technology, 2007
- Experimental and finite element analysis of parameters in manufacturing of metal bellowsThe International Journal of Advanced Manufacturing Technology, 2007
- An experimental and theoretical analysis on the application of stress-based forming limit criterionInternational Journal of Mechanical Sciences, 2006
- Review of theoretical models of the strain-based FLD and their relevance to the stress-based FLDInternational Journal of Plasticity, 2004
- Limit strains in the processes of stretch-forming sheet metalInternational Journal of Mechanical Sciences, 1967