Neutronic modeling of a subcritical system with corium particles and water (from international benchmark)
Authors:
- Anton D. SmirnovASAnton D. Smirnov
- Ekaterina V. BogdanovaEBEkaterina V. Bogdanova
- Pavel A. PugachevPPPavel A. Pugachev
- Ivan S. SaldikovISIvan S. Saldikov
- Mikhail Yu. TernovykhMTMikhail Yu. Ternovykh
- Georgy V. TikhomirovGTGeorgy V. Tikhomirov
- Hiroki TakezawaHTHiroki Takezawa
- Takeshi MuramotoTMTakeshi Muramoto
- Jun NishiyamaJNJun Nishiyama
- Toru ObaraTOToru Obara
Open Access
- 16 September 2020
- journal article
- research article
- Published by Pensoft Publishers in Nuclear Energy and Technology
- Vol. 6 (3) , 155-160
Abstract
After the accident at the Fukushima Daiichi NPP, the attention of the scientific community is riveted on how the consequences are being eliminated. Removing corium – a lava-like resolidified mixture of nuclear fuel with other structural elements of the reactor – remains the most difficult task, the solution of which can take several decades. It is extremely important to exclude the occurrence of any emergency processes during the removal of corium. The purpose of this work was to solve a coordinated hydrodynamic and neutronic problem characterized by a large number of randomly oriented and irregularly located corium particles in water as part of the development of a benchmark for this class of problems. Monte Carlo-based precision codes were used to perform a neutronic analysis. The positions of corium particles were determined from the numerical simulation results. The analysis results obtained using the codes involved showed good agreement for all the states considered. It was shown that the modern neutronic codes based on the Monte Carlo method successfully cope with the geometric formation and solution of the problem with a nontrivial distribution of corium particles in water. The results of the study can be used to justify the safety of corium handling procedures, including its extraction from a damaged power unit.Keywords
This publication has 15 references indexed in Scilit:
- Radiation Dose Analysis in Criticality Accident of Fuel Debris in WaterNuclear Science and Engineering, 2019
- Neutronic modeling of debris beds for a criticality evaluationAnnals of Nuclear Energy, 2019
- Influence of accounting the distribution parameters of the fuel assembly (FA) and dynamic operating characteristics on the fuel nuclide composition of a VVER-1000 spent fuel assembly (SFA)Journal of Physics: Conference Series, 2018
- A Criticality Evaluation of Fukushima Daiichi Unit 1 Fuel Debris2018
- Effect of water entrainment on the coolability of a debris bed surrounded by a by-pass: Integral reflood experiments and modellingAnnals of Nuclear Energy, 2017
- Study of experimental core configuration of the modified STACY for measurement of criticality characteristics of fuel debrisProgress in Nuclear Energy, 2017
- Investigation of the recriticality potential during reflooding phase of Fukushima Daiichi Unit-3 accidentAnnals of Nuclear Energy, 2017
- Development of One-way-coupling Methodology between Severe Accident Integral Code MELCOR and Monte Carlo Neutron Transport Code SERPENTProcedia Engineering, 2016
- Analysis of the accident in the Fukushima Daiichi nuclear power station Unit 3 with MELCOR_2.1Annals of Nuclear Energy, 2015
- Simulation of nuclear-physical processes in the surface layer of a fuel kernel with a consumable absorberAtomic Energy, 2008