EBEkaterina V. Bogdanova

Ekaterina V. Bogdanova

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Ekaterina V. Bogdanova has a total of 36 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Test Results of Variance Reduction Techniques Applied to the Deep Penetration Problem

    by E. V. Bogdanova, G. V. Tikhomirov

    Currently, there is a lack of computer power to perform high-precision reactor core analysis. In full-scale simulation of nuclear reactor cores using the stochastic Monte Carlo method, there are a number of factors that increase the excessive computational load and make calculations difficult. Among them is the large flux attenuation, which can be observed in deep penetration problems. In order to improve the efficiency of Monte Carlo calculations, various reduction techniques are used, which make it possible to reduce the statistical uncertainty of the functional evaluation without increasing the number of simulated histories. This article is devoted to the study and testing of techniques for reducing the variance in the deep penetration problem. A test problem is formulated the solution of which will make it possible to demonstrate the possibility of using various techniques of nonanalog simulation. In order to determine the quantitative efficiency of variance reduction techniques, the FOM characteristic is considered, which is a function of the relative error in a flux estimate and the computational time of the simulation. The article deals with the techniques of nonanalog simulation implemented in the MCU and OpenMC codes. As part of the study, a module of the OpenMC code has been developed which makes it possible to automatically generate weight windows. It is shown that variance reduction techniques increase the calculation efficiency by several times. In particular, the weight window technique in OpenMC increased the efficiency of neutron flux estimation by seven times, while the number of simulated histories remained unchanged. The formulated recommendations can be used in the future for the calculation of full-scale models of cores of innovative nuclear reactors.


  • Open Access

    Test Results of Variance Reduction Techniques Applied to Deep Penetration Problem

    by Екатерина Владимировна Богданова, G. V. Tikhomirov, Георгий Валентинович Тихомиров

    Nowadays, there is a problem of a lack of computer power to conduct high-precision reactor analysis. There are several factors that increase the excessive computational load and make it difficult to calculate nuclear reactor full-scale models using Monte Carlo method. Among them is the large neutron-flux attenuation, which is observed in deep penetration problems. Various reduction techniques are used to increase the efficiency of Monte Carlo calculations in such tasks. It allows to reduce the statistical uncertainty of the functional evaluation without increasing the number of neutron histories. This work is devoted to study and testing of variance reduction techniques in the deep penetration problem. To demonstrate the possibility of using non-analogue Monte Carlo modeling a test problem was formulated. To quantify the efficacy of applying the variance reduction methods, FOM characteristic is considered, which is a function of the relative error in a flux estimate and the computational time of the simulation. The article considers non-analogue techniques implemented in the MCU (Monte Carlo Univarsal) and OpenMC codes. As part of the study, a module of the OpenMC code was developed that allows to automatically generate weight windows. It is shown that variance reduction techniques increase the calculation efficiency by several times, particularly, the weight windows method in OpenMC make it possible to achieve a 7-fold increase in the efficiency of neutron flux estimation with the same number of simulated histories. The formulated recommendations can be used in the calculation of innovative nuclear reactors full-scale models.

  • Open Access

    Analysis of Methods and Technologies for Composition Assessing of Corium Formed as a Result of the Fukushima Daiichi NPP Accident

    by Сергей Николаевич Рыжов, Екатерина Владимировна Богданова, Александр Александрович Рыжков, Павел Александрович Пугачев, G. V. Tikhomirov, M. Yu. Ternovykh, Татьяна Борисовна Алеева, Георгий Валентинович Тихомиров, Михаил Юрьевич Терновых

    This paper analyzes the methods and technologies for assessing the method of formation, composition, characteristics and features of corium, which is a mixture of nuclear and structural materials of the nuclear reactor core, formed as a result of an accident accompanied by partial or complete core melting. The study is based on data from the study of corium formed as a result of the accident at the Fukushima Daiichi nuclear power plant, which are in the public domain and are the result of the work of many scientific organizations around the world. Corium research is one of the main issues in the framework of improving nuclear safety in the future and is one of the objectives of the successful procedure for eliminating the consequences of the accident at the Fukushima Daiichi nuclear power plant. Without a detailed analysis of the neutronic, materials science, gravimetric and other characteristics of the corium, as well as the creation of a complex model of the corium that combines these data, it is impossible to organize an efficient and safe process for removing nuclear materials from the damaged units of the Fukushima Daiichi nuclear power plant. The objective of this work is to combine the existing research results into a data set that allows modeling of the corium using neutronic calculation codes and includes such data as the size, density and morphology of corium samples and their approximate nuclide composition. Such modeling allows not only to perform tasks related to increasing the level of safety in the implementation of the procedure for eliminating the consequences of the accident at the Fukushima Daiichi nuclear power plant, but also to serve as an international benchmark for modeling a mixture containing nuclear materials.


  • Monte Carlo codes benchmarking on sub-critical fuel debris particles system for neutronic analysis

    by Anton Smirnov, Ekaterina Bogdanova, Pavel Pugachev, Mikhail Ternovykh, Ivan Saldikov, Georgy Tikhomirov, Hiroki Takezawa, Jun Nishiyama, Toru Obara

    Fuel debris removal is the most challenging part of damaged nuclear power station decommissioning. It is important to carry out nuclear safety calculations accurately and quickly enough. Here, it was clarified that modern codes based on the Monte Carlo method were capable of performing neutronic analysis with the same accuracy and without significant differences in the results. The benchmark calculations were performed using three codes: MVP, Serpent, and MCU. In this study, the comparison focused on multiplication factor, neutron fluxes and reaction rates relative difference, and calculation time of many fuel debris particles system. Then the calculation results were used when codes comparing. It was shown that the calculation results showed good agreement between all codes. It was assumed that minor differences in the thermal range of neutron fluxes can be caused by different thermal neutrons scattering treatment for all codes. The study also showed that solving such problems requires significant computing power and time. It has been proven that the statistical geometry model in the MVP and the explicit stochastic geometry model in the Serpent have the possibility to provide solutions with the same accuracy, but much faster.


  • Open Access

    Neutronic modeling of a subcritical system with corium particles and water (from international benchmark)

    by Anton D. Smirnov, Ekaterina V. Bogdanova, Pavel A. Pugachev, Ivan S. Saldikov, Mikhail Yu. Ternovykh, Georgy V. Tikhomirov, Hiroki Takezawa, Takeshi Muramoto, Jun Nishiyama, Toru Obara

    After the accident at the Fukushima Daiichi NPP, the attention of the scientific community is riveted on how the consequences are being eliminated. Removing corium – a lava-like resolidified mixture of nuclear fuel with other structural elements of the reactor – remains the most difficult task, the solution of which can take several decades. It is extremely important to exclude the occurrence of any emergency processes during the removal of corium. The purpose of this work was to solve a coordinated hydrodynamic and neutronic problem characterized by a large number of randomly oriented and irregularly located corium particles in water as part of the development of a benchmark for this class of problems. Monte Carlo-based precision codes were used to perform a neutronic analysis. The positions of corium particles were determined from the numerical simulation results. The analysis results obtained using the codes involved showed good agreement for all the states considered. It was shown that the modern neutronic codes based on the Monte Carlo method successfully cope with the geometric formation and solution of the problem with a nontrivial distribution of corium particles in water. The results of the study can be used to justify the safety of corium handling procedures, including its extraction from a damaged power unit.


  • Visualization of neutron characteristics distribution of debris particles

    by P.A. Pugachev, E.V. Bogdanova, I.S. Saldikov, A.D. Smirnov, M.Y. Ternovykh, G.V. Tikhomirov, H. Takezawa, T. Muramoto, J. Nishiyama, T. Obara


  • Open Access

    VVER-1000 pin cell benchmark for coupled neutronics/thermal-hydraulics calculations: preliminary results

    by R B Bahdanovich, V I Romanenko, A L Farkhulina, E V Bogdanova, S P Nikonov, G V Tikhomirov

    There is a need for verification of coupled neutronics / thermal-hydraulics calculation schemes. For this, we propose to use the benchmark based on the pin cell of VVER-1000 reactor. This paper gives a detailed description of the benchmark as well as the results of calculations obtained by MCU/ATHLET and MCU/FLOWVISION coupled codes. We also proposed a new convergence criterion, and showed that some power levels lead to the iterative instability of coupled solution. To enhance the stability one could use stochastic method.


  • Open Access

    Investigation of the effect of spatial discretization and burnup steps on the neutron characteristics of VVER-1000 fuel assembly using MCU code

    by M M Okour, G V Tikhomirov, E V Bogdanova, I S Saldikov

    A fundamental knowledge of the fuel assembly behaviour in different situations of burning is required for safe and economic nuclear power generation. Due to the importance of a fuel rod behaviour modelling in high burnup, in this paper, the spatial discretization used for the fuel assembly and burnup calculations influences significantly the results. The effective multiplication factor, total radial atomic distribution during the burnup of uranium dioxide (UO2) fuel, fission products and actinides total atomic density and their variations besides the speed of calculations by increasing burnup and the burnup steps were studied for different spatially discretized models of fuel assemblies for VVER-1000 reactor in an operational cycle using the MCU Monte Carlo code. The effects of spatial discretization and the number of burnup steps appear slightly with the increasing of the discretization layers and the steps numbers.


  • Study of neutron-physical characteristics of VVER-1200 considering feedbacks using MCU Monte Carlo code

    by A. S. Bikeev, E. V. Bogdanova, E. K. Kosourov, D. A. Shkarovsky, M. A. Kalugin

    The purpose of the work is to calculate VVER-1200 neutron-physical characteristics that are important for safety using MCU Monte Carlo code for an independent verification of the accuracy of design calculations of the first fuel cycle. The calculations were carried out before the startup of the first VVER-1200 power unit. A full-scale computer model of VVER-1200 was developed using the design documentation of the fuel assemblies and the reactor facility. Special attention was given to the accurate specification of the geometry and material description of the core and its immediate environment. The full-scale VVER-1200 model allows performing Monte Carlo calculation of some safety-relevant characteristics for which it is impossible or extremely difficult to carry out full-scale reactor experiments. In total, more than 110 different states were calculated; five states were calculated taking feedbacks into account. For all calculations, the neutron-physical characteristics obtained by means of the MCU code were used to verify the BIPR-7A and the PERMAK-A codes.


  • Open Access

    The concerted calculation of the BN-600 reactor for the deterministic and stochastic codes

    by E V Bogdanova, A N Kuznetsov

    The solution of the problem of increasing the safety of nuclear power plants implies the existence of complete and reliable information about the processes occurring in the core of a working reactor. Nowadays the Monte-Carlo method is the most general-purpose method used to calculate the neutron-physical characteristic of the reactor. But it is characterized by large time of calculation. Therefore, it may be useful to carry out coupled calculations with stochastic and deterministic codes. This article presents the results of research for possibility of combining stochastic and deterministic algorithms in calculation the reactor BN-600. This is only one part of the work, which was carried out in the framework of the graduation project at the NRC "Kurchatov Institute" in cooperation with S. S. Gorodkov and M. A. Kalugin. It is considering the 2-D layer of the BN-600 reactor core from the international benchmark test, published in the report IAEA-TECDOC-1623. Calculations of the reactor were performed with MCU code and then with a standard operative diffusion algorithm with constants taken from the Monte - Carlo computation. Macro cross-section, diffusion coefficients, the effective multiplication factor and the distribution of neutron flux and power were obtained in 15 energy groups. The reasonable agreement between stochastic and deterministic calculations of the BN-600 is observed.