Ultra-High-Bypass-Ratio Fan Flutter Prediction Using Non-linear Fluid–Structure Interaction Model
Authors:
- Huayin ChenHCHuayin Chen
- Kailong XiaKXKailong Xia
- Hefang DengHDHefang Deng
- Mingmin ZhuMZMingmin Zhu
- Jinfang TengJTJinfang Teng
Preprint
- 18 March 2026
- preprint
- Published by Elsevier in SSRN Electronic Journal
Abstract
Next-generation turbofan engine designs have shifted toward higher bypass ratios and lower fan pressure ratios to improve specific fuel consumption. This trend results in larger fan diameters, thinner blades, and the extensive use of composite materials, thereby making aeroelastic instabilities induced by fluid–structure interaction more pronounced. Although the traditional energy method is widely adopted, it lacks the capability to capture complex blade motions and entails prohibitive computational cost. To address these limitations, this study develops a high-efficiency nonlinear fluid–structure interaction (FSI) framework based on a standing-wave-to-traveling-wave transformation. By tracking modal displacements using standing-wave mode shapes, the proposed approach enables the simultaneous extraction of aerodynamic damping for multiple nodal diameters within a single computation. The method is validated on an ultra-high-bypass-ratio (UHBR) fan (ECL5, designed by Ecole Centrale de Lyon, where comprehensive experimental measurements were also carried out) using a Unsteady Reynolds-averaged Navier–Stokes (URANS) solver coupled with an implicit Newmark-β structural integration scheme. Compared with the conventional energy method, the proposed framework achieves a computational cost reduction of more than 90% while maintaining nearly identical damping predictions for the least stable modes. Flutter analysis performed along the high-loaded working line from 80% to 104% design speed indicates that ND1 is the least stable nodal diameter, but positive aerodynamic damping is maintained throughout. The results further reveal that fluctuations in aeroelastic stability are closely associated with acoustic resonance transitions (cut-on/cut-off) within the fan duct. In particular, for ND2 and ND3, a rapid decrease in aerodynamic damping is observed once their characteristic frequencies exceed the upstream cut-on frequency. Overall, the proposed efficient FSI framework provides a reliable and practical tool for rapid aeroelastic stability assessment of advanced fan stages.Keywords
This publication has 17 references indexed in Scilit:
- Impact of acoustic wave propagation characteristics on aerodynamic damping of rotor blades in a transonic axial compressorChinese Journal of Aeronautics, 2024
- Numerical Investigation of the Fan Flutter Mechanism Related to Acoustic Propagation CharacteristicsJournal of Turbomachinery, 2022
- Numerical simulations of flutter mechanism for high-speed wide-chord transonic fanAerospace Science and Technology, 2020
- Fourier methods for turbomachinery applicationsProgress in Aerospace Sciences, 2010
- Nonlinear Analysis of Unsteady Flows in Multistage Turbomachines Using Harmonic BalanceAIAA Journal, 2007
- Toward Intra-Row Gap Optimization for One and Half Stage Transonic CompressorJournal of Turbomachinery, 2005
- Single-Passage Analysis of Unsteady Flows Around Vibrating Blades of a Transonic Fan Under Inlet DistortionJournal of Turbomachinery, 2002
- Computation of Unsteady Flows Around Oscillating Blades Using Linear and Nonlinear Harmonic Euler MethodsJournal of Turbomachinery, 1998
- A Numerical Study of Flutter in a Transonic FanJournal of Turbomachinery, 1998
- A linearized unsteady aerodynamic analysis for transonic cascadesJournal of Fluid Mechanics, 1984