MZMingmin Zhu

Mingmin Zhu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Mingmin Zhu has a total of 65 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Comparative SPIV Investigation of Leakage Flow in an Open Clearance at Different Spanwise Locations Under a Moving Endwall

    by Caiyan Chen, Hongyu Wang, An Sheng, Guangwei Zeng, Mingmin Zhu, Jinfang Teng

    Future commercial engines require higher bypass ratios and smaller cores, leading to open tip clearances exceeding 4% (s/H ≥ 4%) in rear stages. The resulting leakage flows show strong three-dimensional unsteady features that challenge numerical prediction, while experimental data inside open clearances with moving endwalls remain limited. In this study, a Stereo Particle Image Velocimetry (SPIV) system was applied to a high-speed moving-endwall cascade test rig. Measurements were conducted for a Controlled Diffusion Airfoil (CDA) cascade at Mach 0.3, an endwall speed of 900 r/min, and a relative clearance of 7.14%. Velocity fields were obtained on two spanwise planes, 2 mm (MP1) and 3.5 mm (MP2) from the endwall. Results show that the tip leakage vortex develops continuously along the span but differs between planes. In MP2, dominated by blade pressure difference, the leakage jet forms a broader high-velocity region and a more compact vortex, with higher blockage, shear gradient, and turbulent kinetic energy than in MP1. In MP1, endwall shear stretches the leakage flow pitchwise, reducing blockage and weakening mixing. This work demonstrates the feasibility of dual-camera SPIV measurements inside moving-endwall clearances and provides benchmark data for numerical validation.

  • A vertical four-stage low-speed research compressor: Design and experiments

    by Kailong Xia, Hefang Deng, Lin Fan, Hui Liu, Zhenzhou Ju, Mingmin Zhu, Xiaoqing Qiang, Jinfang Teng

    This paper describes a four-stage, vertical, low-speed research compressor (LSRC) at Shanghai Jiao Tong University (SJTU). The compressor has a casing diameter of 1.5 m and was designed following the Wisler similarity methodology to reproduce the aerodynamics of a rear stage of a modern civil high-pressure compressor. The vertical installation provides an axisymmetric baseline for controlled studies of non-axisymmetric tip clearance. The instrumentation combines interstage five-hole probe traverses, L-shaped probes for intra-passage flow surveys, and an 80-port flush-mounted Kulite array above all four rotor stages. Three experimental campaigns with nine test articles are reported, and repeat runs quantify the uncertainty of efficiency differences. In the first campaign, a single-variable test design isolates rotor and stator contributions to stage loss. In the second campaign, reshaping the stationary end wall of the stator hub cavity raises the design-point efficiency by 1.17 points at the same seal clearance, whereas reducing the seal clearance of the baseline cavity nearly threefold produces no resolved change. In the third campaign, a non-axisymmetric inlet guide vane stagger distribution and a second-harmonic tip clearance distribution on the first rotor reduce the design-point efficiency by 0.55 and 0.63 points, with no resolved change in stall margin. Casing pressure measurements show that the clearance pattern modulates the pressure trough beneath the tip leakage vortex at two cycles per revolution, with an amplitude eight times that of the baseline. These measurements establish the SJTU-LSRC as a multistage platform capable of resolving aerodynamic features that are difficult to isolate in high-speed rigs.

  • Effects of fan-root clearance on leakage-flow dynamics and transition-duct aerodynamics in an open fan

    by Zhaoyu He, Mingmin Zhu, Zizhen Chen, Hui Liu, Yongjian Zhong, Songan Zhang, Jinfang Teng

  • Open Access

    Effects of Fan-Root Clearance on Leakage-Flow Dynamics and Transition-Duct Aerodynamics in an Open Fan

    by Zhaoyu He, Mingmin Zhu, Zizhen Chen, Hui Liu, Yongjian Zhong, Songan Zhang, Jinfang Teng

    The open fan is regarded as a promising alternative to high-bypass-ratio turbofan engines due to its high propulsive efficiency. However, the variable-pitch configuration at the rotor root increases the complexity of the root flow and introduces pronounced inlet distortion and unsteadiness to the downstream transition duct. To clarify the coupled inner–outer flow mechanisms at the fan root, numerical simulations of an integrated open-fan and transition duct are conducted in this study. The mechanisms of variable-pitch-induced complex flow phenomena near the open-fan root are investigated for different root clearance heights. The impact of root flow on the downstream transition duct is investigated in terms of inflow distortion and loss characteristics. RANS and URANS simulations are performed in a coupled inner–outer computational domain. The RANS parametric study identifies root clearance height as the primary factor governing transition-duct inlet distortion, motivating URANS simulations of three representative clearance heights—no clearance, 0.2% span, and 1.27% span—to resolve the unsteady rotor-root flow and its interaction with the transition-duct IGV.,The results further indicate that the root spindle configuration exerts a negligible influence on the overall aerodynamic performance of the open fan, with thrust variations within 0.2%, whereas the clearance height governs the evolution of root flow structures. Building on this understanding, the mechanisms underlying inlet distortion in the transition duct are elucidated, with leakage flow identified as the primary driver of the distortion pattern. URANS simulations are subsequently performed for three representative clearance heights to characterize the unsteady flow behavior. The vortex structures at the rotor root are first analyzed, revealing coupled interactions between leakage flow and inherent secondary flow structures. The resulting distortion and unsteadiness at the transition-duct inlet are then quantified. Finally, the influence of clearance height on the aerodynamic performance of the transition-duct IGV is assessed.,The present study clarifies the underlying mechanisms by which rotor-root secondary-flow structures modulate the transition-duct inflow, providing physical insights for the coupled aerodynamic design of open-fan rotor root and downstream core-engine components.

  • Open Access

    Aerodynamic Intake Profile Optimization Design for Civil Aircraft Propulsion Systems

    by Hao Liu, Baoe Hong, Jintao Jiang, Bihai He, Caiyan Chen, Mingmin Zhu

    To improve the aerodynamic design efficiency of nacelle intake systems for wing-mounted civil aero-engines under multiple operating conditions, an integrated multi-objective optimization method was developed to address the limited optimization efficiency and robustness encountered in conventional approaches. The proposed method employed parametric techniques to construct three-dimensional non-axisymmetric nacelle geometries and integrated flow-field simulations with performance evaluation modules, forming a hybrid optimization framework based on a Kriging surrogate model coupled with the NSGA-II genetic algorithm. Two-dimensional numerical analyses were employed to rapidly evaluate inlet profiles and constrain the three-dimensional design space. Following the reduction in the design space, the three-dimensional optimization simultaneously accounted for multiple performance objectives, including nacelle drag and block fuel consumption during cruise conditions, as well as inlet distortion and flow separation under off-design conditions. A set of Pareto-optimal solutions was obtained through surrogate-based prediction and validated using high-fidelity CFD simulations. The results indicate that the optimized nacelle configuration achieves a 0.933% reduction in drag coefficient and a 0.628% decrease in block fuel consumption under cruise conditions. Under crosswind conditions, the inlet total pressure recovery coefficient is increased by 2.76%, accompanied by a pronounced reduction in flow separation, while under maximum-lift coefficient conditions, the total pressure recovery remains above 99%. These results demonstrate that the proposed optimization approach enables coordinated aerodynamic performance improvements across multiple operating conditions while simultaneously enhancing overall aircraft fuel efficiency, providing an effective strategy for advanced nacelle aerodynamic shape design.

  • Open Access

    Ultra-High-Bypass-Ratio Fan Flutter Prediction Using Non-linear Fluid–Structure Interaction Model

    by Huayin Chen, Kailong Xia, Hefang Deng, Mingmin Zhu, Jinfang Teng

    Next-generation turbofan engine designs have shifted toward higher bypass ratios and lower fan pressure ratios to improve specific fuel consumption. This trend results in larger fan diameters, thinner blades, and the extensive use of composite materials, thereby making aeroelastic instabilities induced by fluid–structure interaction more pronounced. Although the traditional energy method is widely adopted, it lacks the capability to capture complex blade motions and entails prohibitive computational cost. To address these limitations, this study develops a high-efficiency nonlinear fluid–structure interaction (FSI) framework based on a standing-wave-to-traveling-wave transformation. By tracking modal displacements using standing-wave mode shapes, the proposed approach enables the simultaneous extraction of aerodynamic damping for multiple nodal diameters within a single computation. The method is validated on an ultra-high-bypass-ratio (UHBR) fan (ECL5, designed by Ecole Centrale de Lyon, where comprehensive experimental measurements were also carried out) using a Unsteady Reynolds-averaged Navier–Stokes (URANS) solver coupled with an implicit Newmark-β structural integration scheme. Compared with the conventional energy method, the proposed framework achieves a computational cost reduction of more than 90% while maintaining nearly identical damping predictions for the least stable modes. Flutter analysis performed along the high-loaded working line from 80% to 104% design speed indicates that ND1 is the least stable nodal diameter, but positive aerodynamic damping is maintained throughout. The results further reveal that fluctuations in aeroelastic stability are closely associated with acoustic resonance transitions (cut-on/cut-off) within the fan duct. In particular, for ND2 and ND3, a rapid decrease in aerodynamic damping is observed once their characteristic frequencies exceed the upstream cut-on frequency. Overall, the proposed efficient FSI framework provides a reliable and practical tool for rapid aeroelastic stability assessment of advanced fan stages.

  • Open Access

    Effects of blade loading distribution on hub leakage flow of cantilevered stator

    by Yaqi Liu, Hefang Deng, Jinfang Teng, Mingmin Zhu, Songan Zhang, Shaopeng Lu

    The hub leakage flow of cantilevered stators has a significant impact and aerodynamic stability of the axial compressor. The formation and development of the hub leakage flow are affected by the blade loading level and distribution, but the internal mechanism of this effect is not fully understood in previous studies. This paper uses a novel experiment facility with a high-speed moving endwall and numerical simulation methods to focus on the influence of a fore-loading and highly-loaded cantilevered cascade on the hub leakage flow and its mechanism, and compared with a typical middle-loading controlled diffusion airfoil cascade. The results demonstrate that although the two cascades have different blade loading levels, the radial distribution of the entropy loss coefficient at the condition of moving endwall is almost identical, which is related to the development location and radial extent of the leakage flow in the two cascades. The position of maximum hub leakage flow rate is delayed relative to the position of maximum blade loading, due to the increase of circumferential momentum by the leakage vortex in the passage. The main cause for the entropy loss is the coupling effect between the product of the leakage flow velocity and injected angle and the mainstream velocity. Based on the findings of this paper, for the hub airfoil of the cantilevered stator, the fore-loading airfoil design can achieve higher loading capacity when the outlet entropy loss distribution is similar. This provides a useful idea for the design of cantilevered stators.

  • Design optimization methods for a compressor rotor under inlet distortion

    by Hefang Deng, Songan Zhang, Honglin He, Mingmin Zhu, Xiaoqing Qiang, Jinfang Teng