PREDICTION OF AERODYNAMIC FORCES ON A LIQUID JET IN CROSSFLOW
- 1 January 2026
- journal article
- Published by Begell House Inc. Publishers in Atomization and Sprays
- Vol. 36 (3) , 23-37
Abstract
Liquid jet in crossflow (JICF) injectors are a popular method of producing a spray of liquid droplets. Lagrangian based models are an attractive option for simulation of JICF due to their convenience in a wider simulation methodology. To further develop these models, it is desirable to know the aerodynamic forces exerted on the liquid jet. In this paper, we present simulations of a liquid jet injected into a subsonic crossflow at two different momentum flux ratios. A coupled level set and volume of fluid solver with adaptive meshing is used for the simulations. Methods for calculating the instantaneous pressure and viscous forces on the surface of the liquid column are presented, which are used to calculate forces. It is shown that the force on the liquid column is dominated by the pressure drag. The choice of reference area between actual frontal area and a nominal value found from injection diameter and penetration length is found to give significant differences. When using the nominal value, a drag coefficient for the whole column of approximately 4 is found for both cases, in agreement with previous studies based on overall trajectory. The variation of force coefficients along the column show that in the streamwise direction the force initially increases due to the flattening of the jet before decreasing as the jet area reduces. A force in the direction opposite to the jet injection is produced which increases along the jet and becomes particularly significant for the low momentum case considered.Keywords
This publication has 19 references indexed in Scilit:
- Air-Film Coupling in Prefilming Airblast Atomisers and the Implications for Subsequent AtomisationFlow, Turbulence and Combustion, 2024
- Review on research progress in liquid jet in crossflowInternational Communications in Heat and Mass Transfer, 2023
- An iterative interface reconstruction method for PLIC in general convex grids as part of a Coupled Level Set Volume of Fluid solverJournal of Computational Physics, 2018
- A Coupled Level Set and Volume of Fluid method for automotive exterior water management applicationsInternational Journal of Multiphase Flow, 2017
- Liquid jet in a subsonic gaseous crossflow: Recent progress and remaining challengesProgress in Energy and Combustion Science, 2016
- A second order coupled level set and volume-of-fluid method for computing growth and collapse of vapor bubblesJournal of Computational Physics, 2003
- Modelling of the atomization of a plain liquid fuel jet in crossflow at gas turbine conditionsAerospace Science and Technology, 2002
- Subgrid-Scale Stress Modelling Based on the Square of the Velocity Gradient TensorFlow, Turbulence and Combustion, 1999
- A continuum method for modeling surface tensionJournal of Computational Physics, 1992
- Solution of the implicitly discretised fluid flow equations by operator-splittingJournal of Computational Physics, 1986