Novel resistor-capacitor (RC) network-based capacitance signal conditioning circuit for tip clearance measurement on gas turbine engine
- 12 August 2019
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering
- Vol. 234 (2) , 342-360
Abstract
Blade tip clearance is a critical engine health parameter measured on gas turbines. Increase in tip clearance results in decreased efficiency, whereas with decrease in clearance due to thermal and centrifugal loads, rotor blades might rub the engine case. Various sensing techniques are being used, among them, capacitance-based systems are widely used by many engine houses. Among the capacitance conditioning circuits, resistor-capacitor series network-based circuits are simple to implement but pose many challenges during practical development. During the current work, the authors have designed a novel capacitance conditioning circuit combining resistor-capacitor series network, instrumentation amplifiers, and direct current–direct current converters. Performance of the developed capacitance conditioning electronics was evaluated through lab testing and tip clearance measurement on fan stage of an aero gas turbine engine. The prototype conditioner circuit has efficiently conditioned and resolved small capacitances varying from 1.25 pF to 0.00413 pF for running clearances between 0.4 mm and 3 mm, respectively. The developed electronics produced high output with signal-to-noise ratio of 58.1 dB, resolution of 2.5 µm, bandwidth of about 700 kHz, and an accuracy of about 98%. This development has culminated towards miniaturization of the total electronics and has the potential to get developed as smart capacitance sensor. This paper explains the practical aspects and challenges involved while designing and developing such practical conditioning circuits.Keywords
This publication has 23 references indexed in Scilit:
- Analysis of uncertainties in measurement of rotor blade tip clearance in gas turbine engine under dynamic conditionProceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 2013
- Turbo machine tip clearance and vibration measurements using a fibre optic laser Doppler position sensorMeasurement Science and Technology, 2006
- Techniques for blade tip clearance measurements with capacitive probesMeasurement Science and Technology, 2000
- A high precision method for measuring very small capacitance changesReview of Scientific Instruments, 1999
- Dual-Laser Probe Measurement of Blade-Tip ClearanceJournal of Turbomachinery, 1999
- A self-balancing circuit to measure capacitance and loss conductance for industrial transducer applicationsIEEE Transactions on Instrumentation and Measurement, 1996
- High frequency and high resolution capacitance measuring circuit for process tomographyIEE Proceedings - Circuits, Devices and Systems, 1994
- Capacitance-type blade-tip clearance measurement system using a dual amplifier with ramp/DC inputs and integrationIEEE Transactions on Instrumentation and Measurement, 1992
- A high frequency stray-immune capacitance transducer based on the charge transfer principleIEEE Transactions on Instrumentation and Measurement, 1988
- An Investigation into the Use of a Cone-Jet Sensor for Clearance and Eccentricity Measurement in TurbomachineryProceedings of the Institution of Mechanical Engineers, 1976