Comparative study of bond strength of tubes bonded to a resin surface on the buccal aspect of molars using Empress Direct resin and Transbond XT resin: an ex vivo study

Authors:

Abstract
To assess the detachment of tubes bonded to the first molars on a resin surface without surrounding dental enamel, which were bonded with the same restorative resin Empress Direct and the Transbond XT resin, testing three preparation methods of the resin surface. The sample consisted of 120 third molars, which were prepared with cavities in the buccal aspect and restored with Empress Direct, which in turn, were divided into six groups. In the case of groups I and II 37% phosphoric acid was placed on the surfaces of the resin restorations; the tubes were bonded on the surface using for group I Empress Direct resin and for group II, Transbond XT. On groups III and IV phosphoric acid and silane were placed; the tubes were bonded with the two types of resin in the same way as in groups I and II. In groups V and VI the resin surface was sandblasted with 50 μ aluminum oxide and conditioned with 37% phosphoric acid and silane. Finally, we evaluated the tubes bond strength. Group I, in which 37% phosphoric acid was used, the bond strength was 2.71 ± 1.06 (MPa) and for Group II, it was 3.32 ± 1.06 (MPa). Group III, in which phosphoric acid and silane was used had a bond strength of 4.45 ± 1.46 (MPa) and group IV showed a bond strength of 6.64 ± 1.93 (MPa); for group V which used sandblasting, orthophosphoric acid and silane, bond strength was 9.55 ± 3.0 (MPa) and for group VI it was 10.56 ± 3.88 (MPa). The bond strength of tubes increases when the resin surface is prepared with sandblasting, 37% phosphoric acid and silane with both Empress Direct and Transbond XT resins. Evaluar el desprendimiento de tubos adheridos a los primeros molares sobre una superficie de resina sin esmalte dental circundante, los cuales fueron pegados con la misma resina restauradora Empress Direct y la resina Transbond XT, probando tres métodos de preparación de la superficie de resina. La muestra constó de 120 terceros molares, los cuales se prepararon con cavidades por la cara vestibular y se obturaron con la resina Empress Direct, los cuales a su vez se dividieron en seis grupos. En el caso de los grupos I y II se colocó ácido ortofosfórico al 37% en las superficies de la obturación de resina; se pegaron los tubos sobre la superficie utilizando para el grupo I la resina Empress Direct y para el grupo II la resina Transbond XT. A los grupos III y IV se les colocó ácido ortofosfórico y silano; se pegaron los tubos con los dos tipos de resina de la misma forma que en los grupos I y II. En los grupos V y VI se arenó la superficie de resina con óxido de aluminio de 50 μ, más la colocación de ácido ortofosfórico al 37% y silano. Finalmente, se evaluó la resistencia al desprendimiento de los tubos. En el grupo I en el que se utilizó ácido ortofosfórico al 37% la resistencia correspondió a 2.71 ± 1.06 (MPa) y del grupo II fue de 3.32 ± 1.06 (MPa). Para el grupo III en el cual se utilizó ácido ortofosfórico y silano fue de 4.45 ± 1.46 (MPa) y para el grupo IV fue de 6.64 ± 1.93 (MPa); para el grupo V en el que se utilizó el arenado, ácido ortofosfórico y silano, fue de 9.55 ± 3.0 (MPa) y del grupo VI fue de 10.56 ± 3.88 (MPa). La resistencia al desprendimiento de los tubos se incrementó cuando se preparó la superficie de la resina con el arenado, ácido ortofosfórico al 37% y silano tanto con la resina Empress Direct como con la resina Transbond XT.

This publication has 10 references indexed in Scilit: