Chipless Wireless Strain Sensor Based on Stretchable Piezoresistive Materials
Open Access
- 25 October 2023
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 23 (23) , 28912-28922
Abstract
Piezoresistive materials are frequently employed for the fabrication of wired strain sensors by exploiting the variation of the surface resistance observed when a mechanical stimulus is applied. However, this variation is measured by electrodes connected to the sheet. In this work we propose to extract the strain information from the piezoresistive material by using a completely wireless approach. The sensor is based on a resonant absorbing structure working at 7.39 GHz that exploits the interaction between an unstretchable metasurface and the piezoresistive material used as ground plane. When the piezoresistive sheet is stretched a variation of the reflection coefficient at the resonance frequency is observed because of the sheet resistance variation. Differently from other chipless strain sensors based on stretchable substrates which are based on a deformation of the metallic pattern under applied strain, here the strain is only applied to the piezoresistive material. The proposed passive wireless sensor has been thoroughly modelled through a transmission line approach to clarify the physical mechanism that induces the scattering modulation. Finally, experimental results that verify the proposed strain sensing approach are presented. The experiments have been carried out several times to evaluate the measurement uncertainty. A sensor sensitivity of 0.5 dB/% has been estimated. The proposed approach considerably simplifies the realization of passive wireless strain sensors as it is not required to print resonators on stretchable substrates with ad-hoc manufacturing processes, but it is sufficient to employ commercially available stretchable shielding materials.Keywords
Funding Information
- Italian Ministry of Education and Research (MIUR) through the Framework of the CrossLab Project and the ForeLab Project
- PRIN2017 GREEN TAGS “Chipless Radio Frequency Identification (RFID) for GREEN TAGging and Sensing.”
This publication has 47 references indexed in Scilit:
- A Blind Source Separation Framework for Monitoring Heart Beat Rate Using Nanofiber-Based Strain SensorsIEEE Sensors Journal, 2015
- Aligned carbon nanotube sheet piezoresistive strain sensorsSmart Materials and Structures, 2015
- Stretchable RFID for Wireless Strain Sensing With Silver Nano InkIEEE Sensors Journal, 2014
- Design and realization of stretchable sewn chipless RFID tags and sensors for wearable applications2013
- Frequency selective surface based passive wireless sensor for structural health monitoringSmart Materials and Structures, 2012
- Battery-less wireless interrogation of microstrip patch antenna for strain sensingSmart Materials and Structures, 2012
- Flexible metamaterials for wireless strain sensingApplied Physics Letters, 2009
- A carbon nanotube strain sensor for structural health monitoringSmart Materials and Structures, 2006
- Embeddable wireless strain sensor based on resonant rf cavitiesReview of Scientific Instruments, 2005
- Double-slot antennas on extended hemispherical and elliptical silicon dielectric lensesIEEE Transactions on Microwave Theory and Techniques, 1993