Comparative Analysis of Bending and Rolling Shear Performance of Poplar and Hybrid Maple–Poplar Cross-Laminated Timber (CLT)
Open Access
- 13 March 2025
- journal article
- research article
- Published by MDPI AG in Journal of Composites Science
- Vol. 9 (3) , 134
Abstract
Cross-laminated timber (CLT) is gaining popularity as a sustainable alternative to traditional building materials. However, the decline of natural vegetation and the growth of plantation hardwoods has led the researchers to consider alternatives. This study presents a comparative analysis of bending and rolling shear performance of homogenous poplar (Populus nigra L.) CLT and hybrid CLT, with maple (Acer platanoides L.), in the outer layer and poplar in the core, compared to spruce (Picea abies (L.), H. Karst.) CLT. The CLT panels were prepared using one-component polyurethane (1C-PUR) and melamine adhesive (ME). Poplar CLT exhibited equal or better properties than spruce CLT. The outer maple layer in the hybrid CLT enhanced the global bending modulus (Emg) and bending strength (fm) by 74% and 37%, respectively, due to its higher modulus of elasticity better shear resistance by reducing the cross-layer stress concentrations and rolling shear failure. Additionally, both the adhesive types and wood species significantly influenced the fm, Emg, and rolling shear strength (fr) independently, while their interaction effect was found to be non-significant. The experimental bending stiffness was higher than the theoretical values. The shear analogy method provided the most accurate results for bending and shear strengths, while bending stiffness was best predicted by the modified gamma method, with minor variations. The finite-element models (FEMs) also produced results with a deviation of only 10%.Keywords
Funding Information
- Internal Grant Agency (IGA) of the Faculty of Forestry and Wood Sciences (A_20_14, CZ.02.1.01/0.0/4720.0/16_019/0000803)
- Czech University of Life Sciences and “Advanced research supporting the forestry and wood-processing sector’s adaptation to global change and the 4th industrial revolution” (A_20_14, CZ.02.1.01/0.0/4720.0/16_019/0000803)
- OP RDE, The Ministry of Education, Youth and Sports Czech Republic (A_20_14, CZ.02.1.01/0.0/4720.0/16_019/0000803)
This publication has 36 references indexed in Scilit:
- Effective bending and shear stiffness of cross-laminated timber by modal testing: Method development and applicationComposites Part B: Engineering, 2020
- Evaluation of the effect of knots on rolling shear strength of cross laminated timber (CLT)Construction and Building Materials, 2019
- Experimental verification of shear analogy approach to predict bending stiffness for softwood and hardwood cross-laminated timber panelsConstruction and Building Materials, 2019
- Bending and compressive properties of cross-laminated timber (CLT) panels made from Canadian hemlockConstruction and Building Materials, 2018
- Planar shear and bending properties of hybrid CLT fabricated with lumber and LVLConstruction and Building Materials, 2017
- Structural performance of hybrid SPFs-LSL cross-laminated timber panelsConstruction and Building Materials, 2017
- Hybrid cross-laminated timber plates with beech wood cross-layersConstruction and Building Materials, 2016
- Effects of the thickness of cross-laminated timber (CLT) panels made from Irish Sitka spruce on mechanical performance in bending and shearConstruction and Building Materials, 2016
- Cross laminated timber (CLT): overview and developmentEuropean Journal of Wood and Wood Products, 2016
- Experiments on the effective compliance in the radial–tangential plane of Norway spruceComposite Structures, 2013