Validation of Hot Corrosion and Fatigue Models in HOTPITS
- 6 February 2020
- journal article
- research article
- Published by ASME International in Journal of Engineering Materials and Technology
- Vol. 142 (3) , 1-27
Abstract
HOTPITS is a set of physics-based modeling tools for treating Type II hot corrosion in Ni-based superalloys. The methodology includes modeling the nucleation, growth, and coalescence of pits and microcracks as a random process, as well as the transition of pits to micrcracks and the propagation of the resulting large crack to failure. In this investigation, critical experiments were performed on coupon and low-cycle fatigue (LCF) specimens in order to validate the hot corrosion and the fatigue models in HOTPITS. The pit nucleation, growth, and coalescence models in HOTPITS including the assumption of a random process are validated by the hot corrosion critical experiments performed at two salt contents. The LCF critical experiments, performed using a marker band protocol, validated the stress concentration factor-based models used to predict the pit-to-crack transition in the HOTPITS tool.Keywords
This publication has 12 references indexed in Scilit:
- Effect of chloride concentration on the corrosion–fatigue crack behavior of an age-hardenable martensitic stainless steelInternational Journal of Fatigue, 2016
- Physics‐Based Modeling Tools for Predicting Type II Hot Corrosion in Nickel‐Based Superalloys2016
- Fatigue resistance of a hot corrosion exposed disk superalloy at varied test temperaturesMaterials at High Temperatures, 2016
- The Effects of Hot Corrosion Pits on the Fatigue Resistance of a Disk SuperalloyJournal of Materials Engineering and Performance, 2009
- Measurement and Discussion of Low-Temperature Hot Corrosion Damage Accumulation upon Nickel-Based Superalloy Rene 104Metallurgical and Materials Transactions A, 2008
- Effects of High Temperature Exposures on Fatigue Life of Disk Superalloys2004
- Hot corrosion of materials: a fluxing mechanism?Corrosion Science, 2002
- Influence of Corrosion Pitting on Alloy 718 Fatigue Capability2001
- Mechanism of Na2 SO 4 Induced Corrosion at 600°–900°CJournal of the Electrochemical Society, 1980
- Mechanisms for the hot corrosion of nickel-base alloysMetallurgical Transactions, 1973