Hirohito Yamada
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Hirohito Yamada has a total of 35 co-authors. Here are the top co-authors by number of shared publications:
- Tomohiro Kita
School of Advanced Science and Engineering, Waseda University, 3-4-1 Okubo, Shinjuku-ku, Tokyo 169-8555, Japan
5 shared publications - Anh Igarashi
Graduate School of Engineering, Tohoku University, Sendai, Japan
3 shared publications Tao Chu
3 shared publications- Keishi Ohashi
NEC Corp
2 shared publications - Qiongyan Tang
Graduate School of Engineering, Tohoku University, 6-6-05 Aramaki-Aza-Aoba, Aoba-ku, Sendai 980-8579, Japan
2 shared publications Yasuhiko Arakawa
IIS & RCAST, Univ. of Tokyo, 4-6-1 Komaba, Meguro-ku, Tokyo 153-8505, Japan
2 shared publications
Latest Publications
- Open Access
- 17 October 2026
- Published by MDPI AG in Electronics
- Vol. 15 (20) , 4786
Autonomous Distributed Control of Residential Microgrids: A Simulation-Based Comparative Study
This study investigates two distributed control schemes for residential DC microgrids: an autonomous distributed cooperative control based on the state of charge (SoC) of battery-driven DC/DC converters acting as voltage sources, and an autonomous decentralized control based solely on local feeder voltage, enabled by a battery-integrated feeder configuration. A DC microgrid model consisting of five houses was constructed in MATLAB/Simulink, incorporating PV panels, small wind turbines, typical Japanese household load profiles, EV charging, and realistic meteorological data in Sendai, Japan, for the year of 2023. The cooperative control scheme based on the SoC effectively stabilized feeder voltage, suppressed surplus renewable generation, and reduced grid interaction. The decentralized scheme also maintained stable feeder voltage without device-to-device communication. In both schemes, houses near the grid interconnection point experienced more frequent battery cycling, indicating the need for larger battery capacities at those locations to equalize the overall battery lifetime. Simulations demonstrated that, under the specific configurations and meteorological conditions evaluated, installing a 3.5 kW PV system and a 20 kWh battery per house supplies over 80% of the annual consumption from renewable energy and enables sustained islanded operation during disasters under reduced household load conditions, although temporary energy shortages may occur under adverse winter conditions. These results offer valuable guidelines for designing environmentally sustainable and resilient residential microgrids.
- 17 October 2026
- Published by MDPI AG in Electronics
- Vol. 15 (20) , 4786
Open AccessAutonomous Distributed Control of Residential Microgrids: A Simulation-Based Comparative Study
This study investigates two distributed control schemes for residential DC microgrids: an autonomous distributed cooperative control based on the state of charge (SoC) of battery-driven DC/DC converters acting as voltage sources, and an autonomous decentralized control based solely on local feeder voltage, enabled by a battery-integrated feeder configuration. A DC microgrid model consisting of five houses was constructed in MATLAB/Simulink, incorporating PV panels, small wind turbines, typical Japanese household load profiles, EV charging, and realistic meteorological data in Sendai, Japan, for the year of 2023. The cooperative control scheme based on the SoC effectively stabilized feeder voltage, suppressed surplus renewable generation, and reduced grid interaction. The decentralized scheme also maintained stable feeder voltage without device-to-device communication. In both schemes, houses near the grid interconnection point experienced more frequent battery cycling, indicating the need for larger battery capacities at those locations to equalize the overall battery lifetime. Simulations demonstrated that, under the specific configurations and meteorological conditions evaluated, installing a 3.5 kW PV system and a 20 kWh battery per house supplies over 80% of the annual consumption from renewable energy and enables sustained islanded operation during disasters under reduced household load conditions, although temporary energy shortages may occur under adverse winter conditions. These results offer valuable guidelines for designing environmentally sustainable and resilient residential microgrids.
- Open Access
- 31 August 2026
- Published by MDPI AG in Preprints.org
Autonomous Distributed Control of Residential Microgrids: A Simulation-Based Comparative Study
Residential microgrids are expected to enhance both environmental sustainability and disaster resilience in future housing developments. This study investigates two distributed control schemes for residential DC microgrids: an autonomous distributed cooperative control based on the state of charge (SoC) of battery-driven DC/DC converters, and an autonomous decentralized control based solely on feeder voltage, enabled by directly connected distributed batteries. A detailed DC microgrid model consisting of five houses was constructed in MATLAB/Simulink, incorporating PV panels with different orientations, small wind turbines, household load profiles, EV charging, and realistic meteorological data. The cooperative control scheme effectively stabilized feeder voltage, suppressed surplus renewable generation, and reduced reverse power flow to the utility grid. The decentralized scheme also maintained stable feeder voltage without device-to-device communication, although it resulted in greater reverse power flow due to less effective generation curtailment. In both schemes, houses near the grid-interconnection point experienced more frequent battery cycling, indicating the need for larger battery capacities at those locations. Simulations showed that installing approximately 20 kWh of battery capacity per house enables more than 80% of annual consumption can be obtained from renewable energy and allows continued operation during off-grid conditions with reduced consumption. These results demonstrate the practical feasibility of distributed-control residential microgrids.
- 31 August 2026
- Published by MDPI AG in Preprints.org
Open AccessAutonomous Distributed Control of Residential Microgrids: A Simulation-Based Comparative Study
Residential microgrids are expected to enhance both environmental sustainability and disaster resilience in future housing developments. This study investigates two distributed control schemes for residential DC microgrids: an autonomous distributed cooperative control based on the state of charge (SoC) of battery-driven DC/DC converters, and an autonomous decentralized control based solely on feeder voltage, enabled by directly connected distributed batteries. A detailed DC microgrid model consisting of five houses was constructed in MATLAB/Simulink, incorporating PV panels with different orientations, small wind turbines, household load profiles, EV charging, and realistic meteorological data. The cooperative control scheme effectively stabilized feeder voltage, suppressed surplus renewable generation, and reduced reverse power flow to the utility grid. The decentralized scheme also maintained stable feeder voltage without device-to-device communication, although it resulted in greater reverse power flow due to less effective generation curtailment. In both schemes, houses near the grid-interconnection point experienced more frequent battery cycling, indicating the need for larger battery capacities at those locations. Simulations showed that installing approximately 20 kWh of battery capacity per house enables more than 80% of annual consumption can be obtained from renewable energy and allows continued operation during off-grid conditions with reduced consumption. These results demonstrate the practical feasibility of distributed-control residential microgrids.
- Open Access
Decentralized DC Power-Exchange System for DC Microgrids
A decentralized DC power-exchange method is proposed to enable direct bidirectional power transfer among geographically distributed DC microgrids. Each microgrid is connected to a shared power-exchange grid via a bidirectional DC/DC converter, allowing for flexible participation regardless of location. The architecture supports dynamic scalability, permitting microgrids to join or leave the exchange network without disrupting overall operation. To evaluate the feasibility of the proposed method, a 2-to-2 power-exchange experiment was conducted using lithium-ion batteries configured to emulate microgrid baselines. The results demonstrated that arbitrary power ratios can be achieved through appropriate adjustment of converter parameters, and that transmission loss and efficiency varies depending on the power distribution ratio. In addition, the operational stability of the system was experimentally verified under sudden fluctuations in baseline voltage, such as those caused by abrupt changes in generation or load. Stable power exchange was maintained even under disturbances of several percent. These findings confirm the practicality and robustness of the converter-based architecture and highlight its applicability to scalable, distributed DC microgrid interconnection.
Open AccessDecentralized DC Power-Exchange System for DC Microgrids
A decentralized DC power-exchange method is proposed to enable direct bidirectional power transfer among geographically distributed DC microgrids. Each microgrid is connected to a shared power-exchange grid via a bidirectional DC/DC converter, allowing for flexible participation regardless of location. The architecture supports dynamic scalability, permitting microgrids to join or leave the exchange network without disrupting overall operation. To evaluate the feasibility of the proposed method, a 2-to-2 power-exchange experiment was conducted using lithium-ion batteries configured to emulate microgrid baselines. The results demonstrated that arbitrary power ratios can be achieved through appropriate adjustment of converter parameters, and that transmission loss and efficiency varies depending on the power distribution ratio. In addition, the operational stability of the system was experimentally verified under sudden fluctuations in baseline voltage, such as those caused by abrupt changes in generation or load. Stable power exchange was maintained even under disturbances of several percent. These findings confirm the practicality and robustness of the converter-based architecture and highlight its applicability to scalable, distributed DC microgrid interconnection.
- Open Access
- 13 November 2025
- Published by MDPI AG in Preprints.org
Decentralized DC Power Exchange System for DC Microgrids
A decentralized DC power exchange method is proposed to enable direct bidirectional power transfer among geographically distributed DC microgrids. Each microgrid is connected to a shared power exchange grid via a bidirectional DC/DC converter, al-lowing flexible participation regardless of location. The architecture supports dynamic scalability, permitting microgrids to join or leave the exchange network without dis-rupting overall operation. To evaluate the feasibility of the proposed method, a 2-to-2 power exchange experiment was conducted using lithium-ion batteries configured to emulate microgrid baselines. The results demonstrated that arbitrary power ratios can be achieved through appropriate adjustment of converter parameters, and that trans-mission loss and efficiency varies depending on the power distribution ratio. In addi-tion, the operational stability of the system was experimentally verified under sudden fluctuations in baseline voltage, such as those caused by abrupt changes in generation or load. Stable power exchange was maintained even under disturbances of several percent. These findings confirm the practicality and robustness of the converter-based archi-tecture and highlight its applicability to scalable, distributed DC microgrid intercon-nection.
- 13 November 2025
- Published by MDPI AG in Preprints.org
Open AccessDecentralized DC Power Exchange System for DC Microgrids
A decentralized DC power exchange method is proposed to enable direct bidirectional power transfer among geographically distributed DC microgrids. Each microgrid is connected to a shared power exchange grid via a bidirectional DC/DC converter, al-lowing flexible participation regardless of location. The architecture supports dynamic scalability, permitting microgrids to join or leave the exchange network without dis-rupting overall operation. To evaluate the feasibility of the proposed method, a 2-to-2 power exchange experiment was conducted using lithium-ion batteries configured to emulate microgrid baselines. The results demonstrated that arbitrary power ratios can be achieved through appropriate adjustment of converter parameters, and that trans-mission loss and efficiency varies depending on the power distribution ratio. In addi-tion, the operational stability of the system was experimentally verified under sudden fluctuations in baseline voltage, such as those caused by abrupt changes in generation or load. Stable power exchange was maintained even under disturbances of several percent. These findings confirm the practicality and robustness of the converter-based archi-tecture and highlight its applicability to scalable, distributed DC microgrid intercon-nection.
- Open Access
Autonomous Decentralized Cooperative Control DC Microgrid Deployed in Residential Areas
This paper presents a DC microgrid architecture with autonomous decentralized control that exhibits high resilience against increasingly common threats, such as natural disasters and cyber-physical attacks, as well as its operational characteristics under normal circumstances. The proposed system achieves autonomous decentralized cooperative control by combining a battery-integrated DC baseline, in which multiple distributed small-scale batteries are directly connected to the grid baseline, with a weakly coupled grid architecture in which each power device is loosely coupled via the grid baseline. Unlike conventional approaches that assign grid formation, inertial support, and power balancing functions to DC/DC converters, the proposed approach delegates these fundamental grid roles to the distributed batteries. This configuration simplifies the control logic of the DC/DC converters, limiting their role to power exchange only. To evaluate system performance, a four-family DC microgrid model incorporating a typical Japanese home environment, including an EV charger, was constructed in MATLAB/Simulink R2025a and subjected to one-year simulations. The results showed that with approximately 5 kW of PV panels and a 20 kWh battery capacity per household, a stable power supply could be maintained throughout the year, with more than 50% of the total power consumption covered by solar energy. Furthermore, the predicted battery life was over 20 years, confirming the practicality and economic viability of the proposed residential microgrid design.
Open AccessAutonomous Decentralized Cooperative Control DC Microgrid Deployed in Residential Areas
This paper presents a DC microgrid architecture with autonomous decentralized control that exhibits high resilience against increasingly common threats, such as natural disasters and cyber-physical attacks, as well as its operational characteristics under normal circumstances. The proposed system achieves autonomous decentralized cooperative control by combining a battery-integrated DC baseline, in which multiple distributed small-scale batteries are directly connected to the grid baseline, with a weakly coupled grid architecture in which each power device is loosely coupled via the grid baseline. Unlike conventional approaches that assign grid formation, inertial support, and power balancing functions to DC/DC converters, the proposed approach delegates these fundamental grid roles to the distributed batteries. This configuration simplifies the control logic of the DC/DC converters, limiting their role to power exchange only. To evaluate system performance, a four-family DC microgrid model incorporating a typical Japanese home environment, including an EV charger, was constructed in MATLAB/Simulink R2025a and subjected to one-year simulations. The results showed that with approximately 5 kW of PV panels and a 20 kWh battery capacity per household, a stable power supply could be maintained throughout the year, with more than 50% of the total power consumption covered by solar energy. Furthermore, the predicted battery life was over 20 years, confirming the practicality and economic viability of the proposed residential microgrid design.
- Open Access
- 1 September 2025
- Published by MDPI AG in Preprints.org
Autonomous Decentralized Cooperative Control DC Microgrid Deployed in Residential Areas
This paper presents a novel DC microgrid configuration tailored for residential applications, aiming to harness renewable energy and enhance resilience against the growing threats of natural disasters and cyber-physical attacks—factors that increasingly expose the fragility of existing power grid systems. The proposed system employs autonomous decentralized cooperative control and introduces a distinctive battery-integrated DC-baseline architecture, wherein distributed batteries are directly connected to the grid’s baseline. This topology streamlines control: distributed batteries directly connected to the baseline handle forming and maintaining core grid, while DC/DC converters are dedicated solely to power exchange between power devices. A key factor is to employ weak-coupling grid for realizing autonomous decentralized control. By using the configuration, the system minimizes inter-device interference, thereby obtaining control independence of local devices. Comprehensive MATLAB/Simulink simulations of a four-house DC microgrid—modeled on a typical Japanese residential setting—demonstrate that an optimal configuration with 5 kW solar panels and 20 kWh batteries per household can achieve a renewable energy ratio exceeding 50%, while maintaining stable grid operation year-round, even with electric vehicle charging. The proposed system offers a balanced design with an estimated battery lifetime of approximately 25 years, paving the way for sustainable, resilient, and locally governed energy infrastructures.
- 1 September 2025
- Published by MDPI AG in Preprints.org
Open AccessAutonomous Decentralized Cooperative Control DC Microgrid Deployed in Residential Areas
This paper presents a novel DC microgrid configuration tailored for residential applications, aiming to harness renewable energy and enhance resilience against the growing threats of natural disasters and cyber-physical attacks—factors that increasingly expose the fragility of existing power grid systems. The proposed system employs autonomous decentralized cooperative control and introduces a distinctive battery-integrated DC-baseline architecture, wherein distributed batteries are directly connected to the grid’s baseline. This topology streamlines control: distributed batteries directly connected to the baseline handle forming and maintaining core grid, while DC/DC converters are dedicated solely to power exchange between power devices. A key factor is to employ weak-coupling grid for realizing autonomous decentralized control. By using the configuration, the system minimizes inter-device interference, thereby obtaining control independence of local devices. Comprehensive MATLAB/Simulink simulations of a four-house DC microgrid—modeled on a typical Japanese residential setting—demonstrate that an optimal configuration with 5 kW solar panels and 20 kWh batteries per household can achieve a renewable energy ratio exceeding 50%, while maintaining stable grid operation year-round, even with electric vehicle charging. The proposed system offers a balanced design with an estimated battery lifetime of approximately 25 years, paving the way for sustainable, resilient, and locally governed energy infrastructures.
- 1 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Letters
- Vol. 9 (8) , 1-4
Nanograting Microring Optical Resonators for Enhanced Refractive Index Sensitivity
This study explores the optical resonance characteristics of a Si nanograting ring resonator (NGRR), which incorporates periodic nanograting structures along the microring to facilitate diffraction and promote localized optical field at resonance. The design and fabrication of the NGRR, configured with 100 nm × 60 nm gratings on a 4 μm-radius ring, are presented. Experimental characterization, including the transmission spectrum observed in the bus waveguide and near-field scattering imaging, reveals distinct concentric optical modes in the NGRR at resonance, which differ notably from those in a conventional microring resonator. The NGRR demonstrates a significant enhancement in refractive index sensitivity, achieving 495 nm/RIU, approximately seven times greater than that of the conventional microring resonator. Additionally, the NGRR with nanograting in bus waveguide exhibits a Q factor of 5800 at resonance wavelength of 1565 nm. Simulations validate the experimental results, showing resonance peaks and mode profiles consistent with observations. These finding highlight the potential of NGRRs in achieving high sensitivity while maintaining reasonable Q factors, even when the ring radius is small.
- 1 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Letters
- Vol. 9 (8) , 1-4
Nanograting Microring Optical Resonators for Enhanced Refractive Index Sensitivity
This study explores the optical resonance characteristics of a Si nanograting ring resonator (NGRR), which incorporates periodic nanograting structures along the microring to facilitate diffraction and promote localized optical field at resonance. The design and fabrication of the NGRR, configured with 100 nm × 60 nm gratings on a 4 μm-radius ring, are presented. Experimental characterization, including the transmission spectrum observed in the bus waveguide and near-field scattering imaging, reveals distinct concentric optical modes in the NGRR at resonance, which differ notably from those in a conventional microring resonator. The NGRR demonstrates a significant enhancement in refractive index sensitivity, achieving 495 nm/RIU, approximately seven times greater than that of the conventional microring resonator. Additionally, the NGRR with nanograting in bus waveguide exhibits a Q factor of 5800 at resonance wavelength of 1565 nm. Simulations validate the experimental results, showing resonance peaks and mode profiles consistent with observations. These finding highlight the potential of NGRRs in achieving high sensitivity while maintaining reasonable Q factors, even when the ring radius is small.
- Open Access
- 28 March 2025
- Published by MDPI AG in Electronics
- Vol. 14 (7) , 1356
Autonomous Decentralized Cooperative Control DC Microgrids Realized by Directly Connecting Batteries to the Baseline
Recent years have seen increasing attention paid to autonomous decentralized microgrids that are disaster-resistant and suitable for local consumption of locally generated renewable energy power. Although various methods have been discussed for achieving microgrids through autonomous decentralized cooperative control, there are few reports that have reached the stage of field testing. In this study, I propose a novel method for configuring the baseline of DC microgrids, where storage batteries are distributed and directly connected to the DC bus. I have built a testbed to demonstrate the operation of the DC microgrid through autonomous decentralized cooperative control. My method simply employs the droop characteristics inherent in batteries, and I introduce the new concept of a ‘weakly coupled grid’. This approach allows the realization of microgrids with autonomous decentralized cooperative control without the need for advanced and complex grid control technologies using DC/DC converters, and with a simple configuration. Additionally, by directly connecting batteries to the baseline, I introduce a grid stabilization method achieved by imparting electrical inertia to the baseline. This paper describes the construction method, the operation principle, and safe and stable operational methods for autonomous decentralized microgrids using this approach, aiming to serve as a guide for those who wish to build autonomous decentralized controlled microgrids in practice.
- 28 March 2025
- Published by MDPI AG in Electronics
- Vol. 14 (7) , 1356
Open AccessAutonomous Decentralized Cooperative Control DC Microgrids Realized by Directly Connecting Batteries to the Baseline
Recent years have seen increasing attention paid to autonomous decentralized microgrids that are disaster-resistant and suitable for local consumption of locally generated renewable energy power. Although various methods have been discussed for achieving microgrids through autonomous decentralized cooperative control, there are few reports that have reached the stage of field testing. In this study, I propose a novel method for configuring the baseline of DC microgrids, where storage batteries are distributed and directly connected to the DC bus. I have built a testbed to demonstrate the operation of the DC microgrid through autonomous decentralized cooperative control. My method simply employs the droop characteristics inherent in batteries, and I introduce the new concept of a ‘weakly coupled grid’. This approach allows the realization of microgrids with autonomous decentralized cooperative control without the need for advanced and complex grid control technologies using DC/DC converters, and with a simple configuration. Additionally, by directly connecting batteries to the baseline, I introduce a grid stabilization method achieved by imparting electrical inertia to the baseline. This paper describes the construction method, the operation principle, and safe and stable operational methods for autonomous decentralized microgrids using this approach, aiming to serve as a guide for those who wish to build autonomous decentralized controlled microgrids in practice.
- Open Access
- 11 March 2025
- Published by MDPI AG in Preprints.org
Autonomous Decentralized Cooperative Control DC Microgrids Realized by Directly Connecting Batteries to the Baseline
Recent years have seen increasing attention on autonomous decentralized microgrids that are disaster-resistant and suitable for local consumption of locally generated renewable energy power. Although various methods have been discussed for achieving microgrids through autonomous decentralized cooperative control, there are few reports that have reached the stage of field testing. In this study, we propose a novel configuration method for DC microgrids, where storage batteries are distributed and directly connected to the DC baseline. We have built a testbed to demonstrate the operation of the DC microgrid through autonomous decentralized cooperative control. Our method simply employs the Droop characteristics inherent in batteries, and we introduce the new concept of a "weakly-coupled grid." This approach allows the realization of microgrids with autonomous decentralized cooperative control without the need for advanced and complex grid control technologies such as that with AI, and with a simple configuration. Additionally, by directly connecting batteries to the baseline, we introduced a grid stabilization method by imparting electrical inertia to the baseline. This paper describes the construction method, the operation principle, and the safe and stable operational methods for autonomous decentralized microgrids using this approach, aiming to serve as a guide for those who wish to build autonomous decentralized controlled microgrids in practice.
- 11 March 2025
- Published by MDPI AG in Preprints.org
Open AccessAutonomous Decentralized Cooperative Control DC Microgrids Realized by Directly Connecting Batteries to the Baseline
Recent years have seen increasing attention on autonomous decentralized microgrids that are disaster-resistant and suitable for local consumption of locally generated renewable energy power. Although various methods have been discussed for achieving microgrids through autonomous decentralized cooperative control, there are few reports that have reached the stage of field testing. In this study, we propose a novel configuration method for DC microgrids, where storage batteries are distributed and directly connected to the DC baseline. We have built a testbed to demonstrate the operation of the DC microgrid through autonomous decentralized cooperative control. Our method simply employs the Droop characteristics inherent in batteries, and we introduce the new concept of a "weakly-coupled grid." This approach allows the realization of microgrids with autonomous decentralized cooperative control without the need for advanced and complex grid control technologies such as that with AI, and with a simple configuration. Additionally, by directly connecting batteries to the baseline, we introduced a grid stabilization method by imparting electrical inertia to the baseline. This paper describes the construction method, the operation principle, and the safe and stable operational methods for autonomous decentralized microgrids using this approach, aiming to serve as a guide for those who wish to build autonomous decentralized controlled microgrids in practice.
- Open Access
Enhancement of Refractive Index Sensitivity Using Small Footprint S-Shaped Double-Spiral Resonators for Biosensing
We demonstrate an S-shaped double-spiral microresonator (DSR) for detecting small volumes of analytes, such as liquids or gases, penetrating a microfluidic channel. Optical-ring resonators have been applied as label-free and high-sensitivity biosensors by using an evanescent field for sensing the refractive index of analytes. Enlarging the ring resonator size is a solution for amplifying the interactions between the evanescent field and biomolecules to obtain a higher refractive index sensitivity of the attached analytes. However, it requires a large platform of a hundred square millimeters, and 99% of the cavity area would not involve evanescent field sensing. In this report, we demonstrate the novel design of a Si-based S-shaped double-spiral resonator on a silicon-on-insulator substrate for which the cavity size was 41.6 µm × 88.4 µm. The proposed resonator footprint was reduced by 680 times compared to a microring resonator with the same cavity area. The fabricated resonator exposed more sensitive optical characteristics for refractive index biosensing thanks to the enhanced contact interface by a long cavity length of DSR structures. High quality factors of 1.8 × 104 were demonstrated for 1.2 mm length DSR structures, which were more than two times higher than the quality factors of microring resonators. A bulk sensitivity of 1410 nm/RIU was calculated for detecting 1 µL IPA solutions inside a 200 µm wide microchannel by using the DSR cavity, which had more than a 10-fold higher sensitivity than the sensitivity of the microring resonators. A DSR device was also used for the detection of 100 ppm acetone gas inside a closed bottle.
Open AccessEnhancement of Refractive Index Sensitivity Using Small Footprint S-Shaped Double-Spiral Resonators for Biosensing
We demonstrate an S-shaped double-spiral microresonator (DSR) for detecting small volumes of analytes, such as liquids or gases, penetrating a microfluidic channel. Optical-ring resonators have been applied as label-free and high-sensitivity biosensors by using an evanescent field for sensing the refractive index of analytes. Enlarging the ring resonator size is a solution for amplifying the interactions between the evanescent field and biomolecules to obtain a higher refractive index sensitivity of the attached analytes. However, it requires a large platform of a hundred square millimeters, and 99% of the cavity area would not involve evanescent field sensing. In this report, we demonstrate the novel design of a Si-based S-shaped double-spiral resonator on a silicon-on-insulator substrate for which the cavity size was 41.6 µm × 88.4 µm. The proposed resonator footprint was reduced by 680 times compared to a microring resonator with the same cavity area. The fabricated resonator exposed more sensitive optical characteristics for refractive index biosensing thanks to the enhanced contact interface by a long cavity length of DSR structures. High quality factors of 1.8 × 104 were demonstrated for 1.2 mm length DSR structures, which were more than two times higher than the quality factors of microring resonators. A bulk sensitivity of 1410 nm/RIU was calculated for detecting 1 µL IPA solutions inside a 200 µm wide microchannel by using the DSR cavity, which had more than a 10-fold higher sensitivity than the sensitivity of the microring resonators. A DSR device was also used for the detection of 100 ppm acetone gas inside a closed bottle.