Peter-Jules Van Overloop
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Peter-Jules Van Overloop has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Bart De Schutter
Delft Center for Systems and Control, Delft University of Technology, Delft, The Netherlands
4 shared publications - A. Sadowska
Delft University of Technology
2 shared publications - Charles M. Burt
Chairman, Irrigation Training and Research Center, California Polytechnic State Univ., San Luis Obispo, CA 93407
2 shared publications - Nick van de Giesen
Department of Water Management, Delft University of Technology, Stevinweg 1, 2628 CN Delft, The Netherlands
2 shared publications - Rudy R. Negenborn
Department of Maritime and Transport Technology, Delft University of Technology, Delft, The Netherlands
2 shared publications - G. S. Stelling
Section of Environmental Fluid Mechanics, Faculty of Civil Engineering and Geosciences, Delft University of Technology, Postbox 5048, 2600 , GA, Delft, The Netherlands
1 shared publication
Latest Publications
- 1 January 2015
- Published by Springer Nature
- p. 169-187
Hierarchical MPC-Based Control of an Irrigation Canal
- 1 January 2015
- Published by Springer Nature
- p. 169-187
Hierarchical MPC-Based Control of an Irrigation Canal
- 9 September 2014
- Published by Springer Nature in Water Resources Management
- Vol. 28 (14) , 4999-5019
Hierarchical Operation of Water Level Controllers: Formal Analysis and Application on a Large Scale Irrigation Canal
- 9 September 2014
- Published by Springer Nature in Water Resources Management
- Vol. 28 (14) , 4999-5019
Hierarchical Operation of Water Level Controllers: Formal Analysis and Application on a Large Scale Irrigation Canal
- 1 August 2013
- Published by American Society of Civil Engineers (ASCE) in Journal of Irrigation and Drainage Engineering
- Vol. 139 (8) , 635-644
Application of an In-Line Storage Strategy to Improve the Operational Performance of Main Irrigation Canals Using Model Predictive Control
Storing water in main irrigation canal reaches could be an influential strategy to improve the existing operational activities in the irrigation canals. However, the control of such a canal system will become much more complicated due to freeboards of the reaches temporarily decreasing. In this paper, Model Predictive Control (MPC) is applied to control the water level of an accurate model of a realistic main canal, which consists of 13 canal reaches, using an in-line storage operational strategy. Four different test scenarios are selected to cover a range of conventional to unconventional operational strategies by imposing limitations on the head-gate opening. Different target bands are created between the predefined allowed maximum and minimum water level for the canal reaches and the MPC is obliged to keep the water levels within these ranges. The results show that the in-line storage improves current operational performance of the canal system by compensating the existing delay times of flow t...
- 1 August 2013
- Published by American Society of Civil Engineers (ASCE) in Journal of Irrigation and Drainage Engineering
- Vol. 139 (8) , 635-644
Application of an In-Line Storage Strategy to Improve the Operational Performance of Main Irrigation Canals Using Model Predictive Control
Storing water in main irrigation canal reaches could be an influential strategy to improve the existing operational activities in the irrigation canals. However, the control of such a canal system will become much more complicated due to freeboards of the reaches temporarily decreasing. In this paper, Model Predictive Control (MPC) is applied to control the water level of an accurate model of a realistic main canal, which consists of 13 canal reaches, using an in-line storage operational strategy. Four different test scenarios are selected to cover a range of conventional to unconventional operational strategies by imposing limitations on the head-gate opening. Different target bands are created between the predefined allowed maximum and minimum water level for the canal reaches and the MPC is obliged to keep the water levels within these ranges. The results show that the in-line storage improves current operational performance of the canal system by compensating the existing delay times of flow t...
- Open Access
Influence of a Storm Surge Barrier’s Operation on the Flood Frequency in the Rhine Delta Area
The Rhine River Delta is crucial to the Dutch economy. The Maeslant barrier was built in 1997 to protect the Rhine estuary, with the city and port of Rotterdam, from storm surges. This research takes a simple approach to quantify the influence of the Maeslant storm surge barrier on design water levels behind the barrier. The dikes in the area are supposed to be able to withstand these levels. Equal Level Curves approach is used to calculate the Rotterdam water levels by using Rhine discharges and sea water levels as input. Their joint probability function generates the occurrence frequency of a certain combination that will lead to a certain high water level in Rotterdam. The results show that the flood frequency in Rotterdam is reduced effectively with the controlled barrier in current and in future scenarios influenced by climate change. In addition, an investigation of the sensitivity of the operational parameters suggests that there is a negligible influence on the high water level frequency when the decision closing water level for the barrier is set higher due to the benefits of navigation (but not exceeding the design safety level 4 m MSL).
Open AccessInfluence of a Storm Surge Barrier’s Operation on the Flood Frequency in the Rhine Delta Area
The Rhine River Delta is crucial to the Dutch economy. The Maeslant barrier was built in 1997 to protect the Rhine estuary, with the city and port of Rotterdam, from storm surges. This research takes a simple approach to quantify the influence of the Maeslant storm surge barrier on design water levels behind the barrier. The dikes in the area are supposed to be able to withstand these levels. Equal Level Curves approach is used to calculate the Rotterdam water levels by using Rhine discharges and sea water levels as input. Their joint probability function generates the occurrence frequency of a certain combination that will lead to a certain high water level in Rotterdam. The results show that the flood frequency in Rotterdam is reduced effectively with the controlled barrier in current and in future scenarios influenced by climate change. In addition, an investigation of the sensitivity of the operational parameters suggests that there is a negligible influence on the high water level frequency when the decision closing water level for the barrier is set higher due to the benefits of navigation (but not exceeding the design safety level 4 m MSL).
- 1 February 2010
- Published by IWA Publishing in Water Science & Technology
- Vol. 61 (4) , 869-878
Real-time control of combined surface water quantity and quality: polder flushing
In open water systems, keeping both water depths and water quality at specified values is critical for maintaining a ‘healthy’ water system. Many systems still require manual operation, at least for water quality management. When applying real-time control, both quantity and quality standards need to be met. In this paper, an artificial polder flushing case is studied. Model Predictive Control (MPC) is developed to control the system. In addition to MPC, a ‘forward estimation’ procedure is used to acquire water quality predictions for the simplified model used in MPC optimization. In order to illustrate the advantages of MPC, classical control [Proportional-Integral control (PI)] has been developed for comparison in the test case. The results show that both algorithms are able to control the polder flushing process, but MPC is more efficient in functionality and control flexibility.
- 1 February 2010
- Published by IWA Publishing in Water Science & Technology
- Vol. 61 (4) , 869-878
Real-time control of combined surface water quantity and quality: polder flushing
In open water systems, keeping both water depths and water quality at specified values is critical for maintaining a ‘healthy’ water system. Many systems still require manual operation, at least for water quality management. When applying real-time control, both quantity and quality standards need to be met. In this paper, an artificial polder flushing case is studied. Model Predictive Control (MPC) is developed to control the system. In addition to MPC, a ‘forward estimation’ procedure is used to acquire water quality predictions for the simplified model used in MPC optimization. In order to illustrate the advantages of MPC, classical control [Proportional-Integral control (PI)] has been developed for comparison in the test case. The results show that both algorithms are able to control the polder flushing process, but MPC is more efficient in functionality and control flexibility.
- 21 November 2009
- Published by Springer Nature
- p. 439-461
Predictive Control for National Water Flow Optimization in The Netherlands
- 21 November 2009
- Published by Springer Nature
- p. 439-461
Predictive Control for National Water Flow Optimization in The Netherlands
- Open Access
- 1 January 2009
- Published by American Institute of Mathematical Sciences (AIMS) in Networks and Heterogeneous Media
- Vol. 4 (2) , 359-380
Distributed model predictive control of irrigation canals
Irrigation canals are large-scale systems, consisting of many interacting components, and spanning vast geographical areas. For safe and efficient operation of these canals, maintaining the levels of the water flows close to pre-specified reference values is crucial, both under normal operating conditions as well as in extreme situations. Irrigation canals are equipped with local controllers, to control the flow of water by adjusting the settings of control structures such as gates and pumps. Traditionally, the local controllers operate in a decentralized way in the sense that they use local information only, that they are not explicitly aware of the presence of other controllers or subsystems, and that no communication among them takes place. Hence, an obvious drawback of such a decentralized control scheme is that adequate performance at a system-wide level may be jeopardized, due to the unexpected and unanticipated interactions among the subsystems and the actions of the local controllers. In this paper we survey the state-of-the-art literature on distributed control of water systems in general, and irrigation canals in particular. We focus on the model predictive control (MPC) strategy, which is a model-based control strategy in which prediction models are used in an optimization to determine optimal control inputs over a given horizon. We discuss how communication among local MPC controllers can be included to improve the performance of the overall system. We present a distributed control scheme in which each controller employs MPC to determine those actions that maintain water levels after disturbances close to pre-specified reference values. Using the presented scheme the local controllers cooperatively strive for obtaining the best system-wide performance. A simulation study on an irrigation canal with seven reaches illustrates the potential of the approach.
- 1 January 2009
- Published by American Institute of Mathematical Sciences (AIMS) in Networks and Heterogeneous Media
- Vol. 4 (2) , 359-380
Open AccessDistributed model predictive control of irrigation canals
Irrigation canals are large-scale systems, consisting of many interacting components, and spanning vast geographical areas. For safe and efficient operation of these canals, maintaining the levels of the water flows close to pre-specified reference values is crucial, both under normal operating conditions as well as in extreme situations. Irrigation canals are equipped with local controllers, to control the flow of water by adjusting the settings of control structures such as gates and pumps. Traditionally, the local controllers operate in a decentralized way in the sense that they use local information only, that they are not explicitly aware of the presence of other controllers or subsystems, and that no communication among them takes place. Hence, an obvious drawback of such a decentralized control scheme is that adequate performance at a system-wide level may be jeopardized, due to the unexpected and unanticipated interactions among the subsystems and the actions of the local controllers. In this paper we survey the state-of-the-art literature on distributed control of water systems in general, and irrigation canals in particular. We focus on the model predictive control (MPC) strategy, which is a model-based control strategy in which prediction models are used in an optimization to determine optimal control inputs over a given horizon. We discuss how communication among local MPC controllers can be included to improve the performance of the overall system. We present a distributed control scheme in which each controller employs MPC to determine those actions that maintain water levels after disturbances close to pre-specified reference values. Using the presented scheme the local controllers cooperatively strive for obtaining the best system-wide performance. A simulation study on an irrigation canal with seven reaches illustrates the potential of the approach.