AIAkifumi Iwamoto

Akifumi Iwamoto

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Akifumi Iwamoto has a total of 84 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Tensile Properties of (Gd,Y,Er)BaCuO Superconducting Bulk Material Fabricated by the Infiltration Growth Technique

    by A. Murakami, M. Muralidhar, S. Chida, K. Takahashi, A. Iwamoto

    In order to evaluate the mechanical properties of a (Gd,Y,Er)BaCuO low porosity single-grain bulk sample fabricated by the infiltration growth technique, tensile tests of specimens cut from the bulk sample were carried out. Relationship between the tensile strength and porosity was investigated for the specimens. Tensile strength increases with decreasing the porosity, which is due to the increase of net cross-sectional area and reduction of defects where the stress concentration occurs. Tensile strength of the (Gd,Y,Er)BaCuO bulk sample is comparable to those of other low porosity single-grain bulk materials, (Gd,Dy)BaCuO fabricated by the infiltration growth technique and DyBaCuO fabricated by the melt-processing in O 2 atmosphere. Solidified liquid phase regions and segregated secondary phase particles are observed for the low tensile strength specimens.


  • Open Access

    Development of FAIR conductor and HTS coil for fusion experimental device

    by Toshiyuki Mito, Yuta Onodera, Naoki Hirano, Kazuya Takahata, Nagato Yanagi, Akifumi Iwamoto, Shinji Hamaguchi, Suguru Takada, Tomosumi Baba, Noriko Chikumoto, et al.

    This study is aimed at the development of high-temperature superconducting (HTS) magnets for application in a fusion experimental device next to the Large Helical Device (LHD). By applying the features of an HTS, high current density and high stability can be balanced. As a candidate conductor, REBCO tapes and pure aluminum sheets are laminated and placed in the groove of an aluminum alloy jacket with a circular cross-section, after joining a lid to the jacket using friction stir welding, and twisting the conductor to homogenize its electrical and mechanical properties. The FAIR conductor derives its name from the processes and materials used in its development: Friction stir welding, an Aluminum alloy jacket, Indirect cooling, and REBCO tapes. Initially, the degradation of the critical current of the FAIR conductor is observed, which was eventually resolved. The development status of the FAIR conductor has been reported.


  • Open Access

    Lessons learned from twenty-year operation of the Large Helical Device poloidal coils made from cable-in-conduit conductors

    by Kazuya Takahata, Sadatomo Moriuchi, Kouki Ooba, Shigeyuki Takami, Akifumi Iwamoto, Toshiyuki Mito, Shinsaku Imagawa


  • Open Access

    Mechanical design of experimental apparatus for FIREX cryo-target cooling

    by A Iwamoto, T Norimatsu, M Nakai, H Sakagami, S Fujioka, H Shiraga, H Azechi

    Mechanical design of an experimental apparatus for FIREX cryo-target cooling is described. Gaseous helium (GHe) sealing system at a cryogenic environment is an important issue for laser fusion experiments. The dedicated loading system was designed for a metal gasket. We take U-TIGHTSEAL® (Usui Kokusai Sangyo Kaisha. Ltd.) with an indium plated copper jacket as an example. According to its specification, a linear load of 110 N/m along its circumference is the optimum compression; however a lower load would still maintain helium (He) leak below the required level. Its sealing performance was investigated systematically. Our system demanded 27 N/mm of the load to keep He leak tightness in a cryogenic environment. Once leak tightness was obtained, it could be reduced to 9.5 N/mm.


  • Open Access

    Cool-down performance of the new apparatus for fuel layering demonstrations of FIREX targets

    by A Iwamoto, T Norimatsu, M Nakai, H Sakagami, H Shiraga, H Azechi

    FIREX targets have been developed under two layering strategies: foam shell and cone guide laser heating methods. Basic studies have been conducted by the collaboration research between ILE and NIFS. Then the next stage requires the characterization of a layered solid fuel. The present system is at the disadvantage of optical observations. Therefore, a new apparatus is designed to solve it. Glass windows with a wide aperture are installed for an interferometer and a microscope. To isolate the vibration from a cryocooler, active vibration control units are equipped, and flexible thermal conductive links are utilized. Furthermore, a quick target exchange mechanism is applied to deal with different types of FIREX targets. A target holder is detachable from a main vacuum chamber. A metal gasket with not fixing bolts but a load of ~ thousand newtons on ensures GHe leak tightness for target cooling. Eventually, the design temperature of 10.00 K at a target container has been achieved. The cool-down performance indecates that the new apparatus provides a cryogenic environment for fuel layering demonstrations.


  • Open Access

    Recent progress of fuel layering study for FIREX cryogenic target

    by A. Iwamoto, T. Fujimura, M. Nakai, T. Norimatsu, H. Shiraga, H. Azechi, Y. Fujimoto, S. Machi, H. Sakagami

    The collaboration research of ILE and NIFS has made progress on the FIREX target developments. We have two fuel layering strategies: a foam shell method and a conical laser guide heating technique. To date, preliminary and principle demonstration stages on both fuel layering methods have been reached. This paper describes the present status of the target developments.


  • FIREX foam cryogenic target development: residual void reduction and estimation with solid hydrogen refractive index measurements

    by A. Iwamoto, T. Fujimura, M. Nakai, T. Norimatsu, H. Sakagami, H. Shiraga, H. Azechi

    Voidless fuel solidification within a foam material is attempted for the development of a Fast Ignition Realization EXperiment (FIREX) target. A typical target consists of a foam shell with a thin solid fuel layer, a gold cone guide and a glass fill tube. The foam layer is formed with aggregations of tiny cells. The porous foam material has the advantage of forming a uniform layer in a liquid state by the effect of capillarity. Random liquid–solid transitions of fuel, however, would cause void spaces in each cell because of their different densities. To form a voidless solid fuel layer in the FIREX target, we propose a layering method, which includes the process of controlled solidification and simultaneous liquid fuel supply to the liquid/solid interface. Normal H2 is used as a surrogate fuel for our experiments. By applying a resorcinol/formalin aerogel, which has been developed in the Institute of Laser Engineering, Osaka University, instead of a foam material, formation of a solid H2 layer with reduced void spaces is preliminarily demonstrated. Related solid H2 refractive indices are measured to estimate the void fraction. Eventually, its filling factor reaches ∼99%. Furthermore, the application of the proved method is numerically simulated on the FIREX target. The method is confirmed to be applicable in it with a cone guide heating technique.


  • Dynamic Simulation of Sub-Scale ITER CS/STR Cooling Loop

    by R. Maekawa, K. Oba, S. Takami, A. Iwamoto, H. S. Chang, A. Forgeas, L. Serio, R. Vallocorba, B. Rousset, C. Hoa, et al.

    The dynamic simulation of a sub-scale ITER Central Solenoid (CS)/STRucture (STR) cooling loop has been performed to investigate the cryogenic control strategies against pulsating heat loads. HELIOS facility has been modified for this particular study, which consists of a Liquid Helium (LHe) reservoir with two immersed heat exchangers, a circulation pump and an approximately 130 m long piping with three evenly distributed heated sections. The setup provides the equivalent thermo-hydraulic configuration of the ITER CS/STR, cooled by the forced-flow Supercritical Helium (SHe). The dynamic simulator, C-PREST, has been utilized to model the HELIOS test loop and to compare the results with the experimental data sets. This paper presents the dynamic simulation results and discusses the control strategy to minimize the cooling power requirements, to have high reliability.


  • Open Access

    Study on possible fuel layering sequence for FIREX target

    by A Iwamoto, T Fujimura, M Nakai, K Nagai, T Norimatsu, H Azechi, R Maekawa, H Sakagami

    A new procedure of fuel layering for the Fast Ignition Realization Experiment (FIREX) target is proposed. A conical laser guide heating technique was experimentally demonstrated in principle as the followings. It employed the target consisting of a polystyrene (PS) shell, a fill tube and a conical laser guide. At first, liquid fuel was fed into the shell and existed around the conical laser guide because the surface tension of the fuel must cause it. Then, it was solidified. The laser light provided a heat source to the conical laser guide so that the solid fuel was moved to the other interior of the shell. This process resulted in missing solid fuel around the conical laser guide. To fill the vacant space, liquid fuel was added as temperature was raised to the melting point. After the liquid fuel addition, temperature was lowered to the solidification point again. During this process, most of the solid fuel could survive.


  • Study on a fuel layering sequence of the foam target for the FIREX project

    by A Iwamoto, T Fujimura, M Nakai, K Nagai, T Norimatsu, R Maekawa, T Mito, H Sakagami, O Motojima, H Azechi, et al.

    To develop the fuel layering sequence for the FIREX cryogenic target, redistribution of surrogate fuel, solid H2 in a shell with cooling duration has been studied. Two kinds of dummy targets with a foam and a polystyrene shells (~800 μm and 2 mm in diameter, respectively) were tested. The solid H2 layer in the polystyrene shell was accumulated on the shell bottom as time elapsed. On the other hand, the foam shell had less elapsed time dependence than the polystyrene shell. Furthermore, elapsed time appeared to make the solid H2 layer uniform.