Dennis Schumacher
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Dennis Schumacher has a total of 33 co-authors. Here are the top co-authors by number of shared publications:
A. Blažević
GSI Helmholtzzentrum für Schwerionenforschung GmbH, Darmstadt, Germany
3 shared publicationsM. Roth
Technische Universität Darmstadt, Darmstadt, Germany
3 shared publications- Simon Busold
Institut für Kernphysik, Technische Universität Darmstadt, Schloßgartenstrasse 9, D-64289 Darmstadt, Germany
3 shared publications - Christian Brabetz
GSI Helmholtzzentrum für Schwerionenforschung GmbH, Darmstadt, Germany
2 shared publications - Florian Kroll
Helmholtz-Zentrum Dresden - Rossendorf, Dresden, 01328, Germany
2 shared publications O. Deppert
Institut für Kernphysik, Technische Universität Darmstadt, Schloßgartenstrasse 9, D-64289 Darmstadt, Germany
2 shared publications
Latest Publications
- Open Access
Modification of Space Debris Trajectories through Lasers: Dependence of Thermal and Impulse Coupling on Material and Surface Properties
Environmental pollution exists not only within our atmosphere but also in space. Space debris is a critical problem of modern and future space infrastructure. Congested orbits raise the question of spacecraft disposal. Therefore, state-of-the-art satellites come with a deorbit system in cases of low Earth orbit (LEO) and with thrusters for transferring into the graveyard orbit for geostationary and geosynchronous orbits. No practical solution is available for debris objects that stem from fragmentation events. The present study focuses on objects in LEO orbits with dimensions in the dangerous class of 1 to 10 cm. Our assumed method for the change of trajectories of space debris is laser ablation for collision avoidance or complete removal by ground-based laser systems. Thus, we executed an experimental feasibility study with focus on thermal and impulse coupling between laser and sample. Free-fall experiments with a 10 ns laser pulse at nominally 60 J and 1064 nm were conducted with GSI Darmstadt’s nhelix laser on various sample materials with different surfaces. Ablated mass, heating, and trajectory were recorded. Furthermore, we investigated the influence of the sample surface roughness on the laser-object interaction. We measured impulse coupling coefficients between 7 and 40 µNs/J and thermal coupling coefficients between 2% and 12.5% both depending on target fluence, surface roughness, and material. Ablated mass and changes in surface roughness were considered via simulation to discriminate their relevance for a multiple shot concept.
Open AccessModification of Space Debris Trajectories through Lasers: Dependence of Thermal and Impulse Coupling on Material and Surface Properties
Environmental pollution exists not only within our atmosphere but also in space. Space debris is a critical problem of modern and future space infrastructure. Congested orbits raise the question of spacecraft disposal. Therefore, state-of-the-art satellites come with a deorbit system in cases of low Earth orbit (LEO) and with thrusters for transferring into the graveyard orbit for geostationary and geosynchronous orbits. No practical solution is available for debris objects that stem from fragmentation events. The present study focuses on objects in LEO orbits with dimensions in the dangerous class of 1 to 10 cm. Our assumed method for the change of trajectories of space debris is laser ablation for collision avoidance or complete removal by ground-based laser systems. Thus, we executed an experimental feasibility study with focus on thermal and impulse coupling between laser and sample. Free-fall experiments with a 10 ns laser pulse at nominally 60 J and 1064 nm were conducted with GSI Darmstadt’s nhelix laser on various sample materials with different surfaces. Ablated mass, heating, and trajectory were recorded. Furthermore, we investigated the influence of the sample surface roughness on the laser-object interaction. We measured impulse coupling coefficients between 7 and 40 µNs/J and thermal coupling coefficients between 2% and 12.5% both depending on target fluence, surface roughness, and material. Ablated mass and changes in surface roughness were considered via simulation to discriminate their relevance for a multiple shot concept.
- 27 October 2017
- Published by American Physical Society (APS) in Physical Review E
- Vol. 96 (4) , 043210
Temperature measurement of hohlraum radiation for energy loss experiments in indirectly laser heated carbon plasma
For ion energy loss measurements in plasmas with near solid densities, an indirect laser heating scheme for carbon foils has been developed at GSI Helmholtzzentrum für Schwerionenforschung GmbH (Darmstadt, Germany). To achieve an electron density of and an electron temperature of , two carbon foils with an areal density of heated in a double-hohlraum configuration have been chosen. In this paper we present the results of temperature measurements of both primary and secondary hohlraums for two different hohlraum designs. They were heated by the PHELIX laser with a wavelength of and an energy of in . For this purpose the temperature has been investigated by an x-ray streak camera with a transmission grating as the dispersive element.- 27 October 2017
- Published by American Physical Society (APS) in Physical Review E
- Vol. 96 (4) , 043210
Temperature measurement of hohlraum radiation for energy loss experiments in indirectly laser heated carbon plasma
For ion energy loss measurements in plasmas with near solid densities, an indirect laser heating scheme for carbon foils has been developed at GSI Helmholtzzentrum für Schwerionenforschung GmbH (Darmstadt, Germany). To achieve an electron density of and an electron temperature of , two carbon foils with an areal density of heated in a double-hohlraum configuration have been chosen. In this paper we present the results of temperature measurements of both primary and secondary hohlraums for two different hohlraum designs. They were heated by the PHELIX laser with a wavelength of and an energy of in . For this purpose the temperature has been investigated by an x-ray streak camera with a transmission grating as the dispersive element.- Open Access
- 17 March 2014
- Published by American Physical Society (APS) in Physical Review Special Topics - Accelerators and Beams
- Vol. 17 (3) , 031302
Commissioning of a compact laser-based proton beam line for high intensity bunches around 10 MeV
We report on the first results of experiments with a new laser-based proton beam line at the GSI accelerator facility in Darmstadt. It delivers high current bunches at proton energies around 9.6 MeV, containing more than particles in less than 10 ns and with tunable energy spread down to 2.7% ( at FWHM). A target normal sheath acceleration stage serves as a proton source and a pulsed solenoid provides for beam collimation and energy selection. Finally a synchronous radio frequency (rf) field is applied via a rf cavity for energy compression at a synchronous phase of . The proton bunch is characterized at the end of the very compact beam line, only 3 m behind the laser matter interaction point, which defines the particle source.- 17 March 2014
- Published by American Physical Society (APS) in Physical Review Special Topics - Accelerators and Beams
- Vol. 17 (3) , 031302
Open AccessCommissioning of a compact laser-based proton beam line for high intensity bunches around 10 MeV
We report on the first results of experiments with a new laser-based proton beam line at the GSI accelerator facility in Darmstadt. It delivers high current bunches at proton energies around 9.6 MeV, containing more than particles in less than 10 ns and with tunable energy spread down to 2.7% ( at FWHM). A target normal sheath acceleration stage serves as a proton source and a pulsed solenoid provides for beam collimation and energy selection. Finally a synchronous radio frequency (rf) field is applied via a rf cavity for energy compression at a synchronous phase of . The proton bunch is characterized at the end of the very compact beam line, only 3 m behind the laser matter interaction point, which defines the particle source. - Open Access
- 17 October 2013
- Published by American Physical Society (APS) in Physical Review Special Topics - Accelerators and Beams
- Vol. 16 (10) , 101302
Focusing and transport of high-intensity multi-MeV proton bunches from a compact laser-driven source
Laser ion acceleration provides for compact, high-intensity ion sources in the multi-MeV range. Using a pulsed high-field solenoid, for the first time high-intensity laser-accelerated proton bunches could be selected from the continuous exponential spectrum and delivered to large distances, containing more than particles in a narrow energy interval around a central energy of 9.4 MeV and showing envelope divergence. The bunches of only a few nanoseconds bunch duration were characterized 2.2 m behind the laser-plasma source with respect to arrival time, energy width, and intensity as well as spatial and temporal bunch profile.- 17 October 2013
- Published by American Physical Society (APS) in Physical Review Special Topics - Accelerators and Beams
- Vol. 16 (10) , 101302
Open AccessFocusing and transport of high-intensity multi-MeV proton bunches from a compact laser-driven source
Laser ion acceleration provides for compact, high-intensity ion sources in the multi-MeV range. Using a pulsed high-field solenoid, for the first time high-intensity laser-accelerated proton bunches could be selected from the continuous exponential spectrum and delivered to large distances, containing more than particles in a narrow energy interval around a central energy of 9.4 MeV and showing envelope divergence. The bunches of only a few nanoseconds bunch duration were characterized 2.2 m behind the laser-plasma source with respect to arrival time, energy width, and intensity as well as spatial and temporal bunch profile.